Edelbrock 2917 Nstallation Bedienungsanleitung

Catalog #s 2916, 2917, 2918, 2927

Brochure No. 63-0211

Super Victor BBC Intake Manifolds (3500-8500 RPM), Non-EGR

For Standard BBC - Catalog #2917 (CNC) & #2927

For “Tall Deck” BBC - Catalog #2916 & #2918 (CNC)

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before installing your new intake manifold. If you have any questions, do not

hesitate to contact our Technical Hotline at: 1-800-416-8628, from 7am-5pm Pacific Standard Time, Monday-Friday,

or via e-mail at: [email protected]. Please fill out and mail your warranty card.

•DESCRIPTION: Super Victor BBC manifolds are designed for competition vehicles only. They are not intended to be

used on the street as there are no provisions for chokes, emission components, etc. Tall-Deck versions are intended

to be used on 10.2” deck blocks with no need for manifold spacers, and will accept standard length distributors.

NOTE: It is the responsibility of the end user to verify conformity to a particular racing association’s rules

regarding manifold dimensions, fitment to a template, etc.

•CARBURETOR RECOMMENDATIONS: Use an appropriate 4500 series racing carburetor (CFM will vary according to

your application).

•CARBURETOR SPACERS: Both engine dynamometer and in-car tests have shown additional torque is available by

the use of a one-inch thick, open (not 4-hole) carburetor spacer (# 8717) on the Super Victor manifold.

•MANIFOLD TORQUE: Torque the manifold bolts to 25 ft/lbs in small, even steps, following the recommended torque

sequence (See Fig. 1). If you cannot fit a torque wrench on some of the bolts, use a small box end wrench to avoid

over tightening.

•INTAKE GASKETS: As cast manifolds will fit well with

Fel-Pro #1211 intake gaskets. CNC versions are

matched to Fel-Pro #1275 gaskets.

•PREP AND TUNING FOR POWER: Optimum cylinder

head port opening size should be as close as possible

to the size of the gasket being used. Port-match the

manifold exits .020” per side smaller than either the

gasket being used, or the cylinder head port opening,

whichever is smaller. NOTE: As cast models only.

CNC models do not require port matching when

used with the recommended gasket.

•END SEAL CLEARANCE: Due to varying deck heights

and/or valley widths, either from decking the block or

milling the cylinder heads, the end seal clearance

should be checked. Lay the manifold on the engine with gaskets in place, and measure the clearance. There should

be a minimum of .060” between the block surface and the end seal surface of the manifold. You may need to machine

the manifold flanges or end seal surface to achieve optimum clearance.

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech-Line: 1-800-416-8628 • E-Mail: [email protected]

Figure 1 - 396-502 C.I.D. Chevrolet Bolt Torque Sequence

Torque Bolts To 25 ft./lbs.

614 51112

8723910

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 5790 Bedienungsanleitung

Edelbrock

Edelbrock Performer 70011 Technisches Handbuch

Edelbrock

Edelbrock 3847/3 Bedienungsanleitung

Edelbrock

Edelbrock 70028 Bedienungsanleitung

Edelbrock

Edelbrock 5275 Bedienungsanleitung

Edelbrock

Edelbrock 66013 Bedienungsanleitung

Edelbrock

Edelbrock 5782 Bedienungsanleitung

Edelbrock

Edelbrock 1500-6500 Bedienungsanleitung

Edelbrock

Edelbrock 1478 Bedienungsanleitung

Edelbrock

Edelbrock 67082 Bedienungsanleitung

Edelbrock

Edelbrock 68452 Bedienungsanleitung

Edelbrock

Edelbrock 3824 Bedienungsanleitung

Edelbrock

Edelbrock 2103 Gebrauchsanweisung

Edelbrock

Edelbrock 307 Bedienungsanleitung

Edelbrock

Edelbrock Acura Integra 6737 Bedienungsanleitung

Edelbrock

Edelbrock 4789 Bedienungsanleitung

Edelbrock

Edelbrock 1997 Bedienungsanleitung

Edelbrock

Edelbrock 5220 Bedienungsanleitung

Edelbrock

Edelbrock 17934 Bedienungsanleitung

Edelbrock

Edelbrock 5721 Bedienungsanleitung

Edelbrock

Edelbrock Victor X 4760 Bedienungsanleitung

Edelbrock

Edelbrock Russell 651107 Bedienungsanleitung

Edelbrock

Edelbrock 67322 Bedienungsanleitung

Edelbrock

Edelbrock ENDURASHINE 63-0299 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung