Edelbrock 67082 Bedienungsanleitung

Catalog #67082, 67083, 67092, 67093

Page 1 of 2 Brochure #63-67082

Rev. 5/06 - DA/mc

TUBULAR EXHAUST SYSTEM

Vehicle Applications: See Below

Catalog #67082, #67083, #67092, #67093

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new

Tubular Exhaust System

(TES). If you have any questions, please

contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at

[email protected]. Please fill out and mail your warranty card.

Applications:

Catalog #s 67082, #67083 - 1996-1997 Chev./GMC S-10, S-15 Pick-Up, 4.3L V6 2WD with Auto Transmission

Catalog #s 67092, #67093 - 1996-1997 Chev./GMC S-10, S-15 Pick-Up, Blazer, Jimmy, 4.3L V6 4WD, Auto Transmission

TUBULAR EXHAUST SYSTEM: These components are designed as a system to improve the exhaust efficiency of the GM C.P.I.

(Central Port Injection) 4.3L V6 engine. A performance gain can be expected by the installation of the system. This system requires

no welding for installation and retains all O.E.M. emissions equipment.

Suggested Tools Needed for Installation: This vehicle has some metric fasteners.

❑ 3/8" ratchet socket set with extensions and universal 13mm and 15mm swivel sockets

❑Combination set of open-end wrenches

❑Jackstands, screwdrivers, pliers, crescent wrench, etc.

❑ Liquid penetrant, (GM #1052627) anti-seize compound (GM #5613695)

SPECIAL NOTICE: This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the California Air

Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment certification, we

have included a silver fan shroud decal to help testing personnel verify the this part is a legal replacement on the vehicle for which

it is cataloged. The adhesive-backed decal should be affixed next to the existing emission and engine specifications decal. Do not

cover any part of your original emission decal.

WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your Edelbrock Tubular

Exhaust Systems. Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the system.

NOTE: High temperature spark plug wires and boots are recommended to withstand heat from T.E.S.

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in

poor performance and engine or vehicle damage.

INSTALLATION INSTRUCTIONS

DISASSEMBLY

1. Disconnect battery negative cable from battery.

2. Raise vehicle and support with jackstands.

3. Use penetrating oil on all nuts and bolts to be removed.

This will prevent the possibility of broken or stripped nuts

and bolts.

4. Remove O2 sensors and unbolt exhaust crossover pipe

from manifolds.

5. Unbolt and remove crossover pipe assembly.

6. Lower vehicle and remove air cleaner assembly.

7. Remove all spark plugs.

8. Unbolt and remove right side exhaust manifold.

9. Unbolt dipstick bracket from cylinder head, but do not

remove dipstick.

10. Remove EGR tube from left manifold.

11. Remove cross bolt from steering shaft and slide lower

section of shaft down off of upper shaft.

12. Unbolt and remove left exhaust manifold.

13. Remove EGR adapter from left manifold.

ASSEMBLY LEFT SIDE

1. Install EGR adapter in new manifold.

2. Start rear manifold bolt with gasket, lock and flat washer

in place, and screw in leaving just enough space to slide

manifold into position. NOTE: Be sure spark plug clips do

not interfere with manifold surface.

Catalog #67082, 67083, 67092, 67093

Page 2 of 2 Brochure #63-67082

Rev. 5/06 - DA/mc

Edelbrock Corporation, 2700 California St., Torrance, CA 90503

Tech Line: 1-800-416-8628

E-Mail: [email protected]

KIT CONTENTS

Qty. Part # Description

❑125-9447 Header left side

❑125-9446 Header right side

❑125-9521 Extension pipe left side

❑125-9643 Y-pipe assembly

3. Slide manifold into position and start all bolts, using

lock washers on all bolts plus flat washers on slotted

ends (do not tighten). Use ferry bolt and spacer for

radiator hose support bracket.

4. Install EGR tube on manifold.

5. Tighten all bolts at this time.

ASSEMBLY RIGHT SIDE

1. Start rear manifold bolt with gasket, lock and flat

washers in place, then screw in leaving just enough

space to slide manifold into position. NOTE: Be sure

spark plug clips do not interfere with manifold

surface.

2. Place manifold into vehicle with dipstick between

first and second exhaust tube, slide manifold into

position and start all bolts using lock washers

provided (lock and flat washers on slotted ends).

3. Re-attach dipstick to cylinder head using 1/4" bolt

and 1/2" long spacer tube provided.

4. Tighten all bolts at this time.

5. Raise vehicle.

6. Replace O2 sensor in left manifold and attach wires.

Replace O2 sensor in right manifold and attach wires.

7. Install extension pipes and start all bolts.

8. Replace O2 sensor in catalytic converter.

9. Tighten all bolts.

10. Lower vehicle and replace all spark plugs.

11. Replace all spark plug wires.

12. Check all hydraulic and fuel lines making sure there is

adequate clearance.

13. Replace air cleaner assembly and connect battery.

14. At this point, it would be a good idea to look everything

over and make sure nothing was missed in assembly.

15. Start vehicle and bring up to normal operating

temperature and check for possible leaks.

16. Turn engine off and let cool. Tighten all bolts again.

Catalog #67082 (Ceramic-Coated)

Qty. Part # Description

❑125-9123 Header left side

❑125-9078 Header right side

❑125-9521 Extension pipe left side

❑125-9643 Y-pipe assembly

Catalog #67083 (Ti-Tech Coated)

Qty. Part # Description

❑125-9448 Header left side

❑125-9446 Header right side

❑125-9523 Extension pipe left side

❑125-9634 Y-pipe assembly

Catalog #67092 (Ceramic-Coated)

Qty. Part # Description

❑125-9113 Header left side

❑125-9078 Header right side

❑125-9523 Extension pipe left side

❑125-9634 Y-pipe assembly

Catalog #67093 (Ti-Tech Coated)

Qty. Description

❑1Flange connector #46-1060

❑1Dipstick spacer; 3/8” O.D. x 1/2”

❑2Manifold port gaskets

❑2Donut connector gaskets

❑1Catalytic converter flange gasket

❑12-1/4” U-muffler clamp

❑ 11 3/8”-16 x 1” Hex header bolts

❑11/4”-20 x 1” Heax header bolts

❑43/8”-16 x 2” Hex bolts

❑83/8” Flat washers

❑16 3/8” Lock washers

❑13/8” Ferry bolt

❑ 15/8” Spacer, 1.50” long

Parts Common to All Part Numbers

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock Performer-Plus 2152 Bedienungsanleitung

Edelbrock

Edelbrock Performer 4754 Bedienungsanleitung

Edelbrock

Edelbrock Chevrolet Imapala 5.7L LT1 V8 Bedienungsanleitung

Edelbrock

Edelbrock 8135 Bedienungsanleitung

Edelbrock

Edelbrock 73802 Bedienungsanleitung

Edelbrock

Edelbrock 6567 Bedienungsanleitung

Edelbrock

Edelbrock 7122 Bedienungsanleitung

Edelbrock

Edelbrock 68832 (Ceramic-Coated) Bedienungsanleitung

Edelbrock

Edelbrock 7880 Bedienungsanleitung

Edelbrock

Edelbrock 3867 Bedienungsanleitung

Edelbrock

Edelbrock 15022 Bedienungsanleitung

Edelbrock

Edelbrock E-Street 2 Bedienungsanleitung

Edelbrock

Edelbrock 66693 Bedienungsanleitung

Edelbrock

Edelbrock Performer 70070 Bedienungsanleitung

Edelbrock

Edelbrock 41000 Series Bedienungsanleitung

Edelbrock

Edelbrock 70207 Bedienungsanleitung

Edelbrock

Edelbrock 1801 Bedienungsanleitung

Edelbrock

Edelbrock 6560 Bedienungsanleitung

Edelbrock

Edelbrock 5682 Bedienungsanleitung

Edelbrock

Edelbrock Performer 70060 Technisches Handbuch

Edelbrock

Edelbrock 5756 Bedienungsanleitung

Edelbrock

Edelbrock Performer-Plus 2172 Bedienungsanleitung

Edelbrock

Edelbrock Square-Bore Carb 2696 Bedienungsanleitung

Edelbrock

Edelbrock 5766 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung