Edelbrock 7798 Bedienungsanleitung

Catalog #7798, 7799

Rev. 12/07 - AJ/mc

Brochure #63-0487

BIG BLOCK CHRYSLER VALLEY COVER PLATES

For B and RB Chrysler Engine Blocks

Catalog #7798 & 7799

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with

common tools and procedures. However, you should be familiar with and comfortable working on your vehicle. If you do

not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified

mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific

Standard Time, Monday through Friday or e-mail us at [email protected].

IMPORTANT NOTE: Proper installation is the responsibility of the installer.

Improper installation may result in poor performance and engine or vehicle damage.

DESCRIPTION: These steel Valley Cover Plates are designed to cover the lifter valley of Chrysler big block V8 engines

when Edelbrock Victor Big Block Chrysler cylinder heads #77919 or 77929 are used. A stock sheet-metal valley cover

may not be used with Edelbrock Victor cylinder heads. Part #7798 fits Chyrsler RB (413-426 Wedge-440) engine blocks

and #7799 fits Chrysler B (361-383-400) engines.

KIT CONTENTS:

❑1 Valley Cover Plate

❑14 1/4-20 x 1/2” bolts

INSTALLATION PROCEDURE

(NOTE: Install the valley cover only AFTER your Edelbrock cylinder heads have been installed.)

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech Line: 1-800-416-8628

E-Mail: [email protected]

1. Be sure that the mating surfaces of the block and the surface of the cylinder heads that will meet the valley

cover are thoroughly clean and free of any oils or debris before installation. Use alcohol or lacquer thinner

on a lint-free rag to clean.

2. Apply a continuous, 1/8” bead of automotive RTV silicone sealer to the end sealing surfaces on block and

along bottom of intake flange on the cylinder head where it will meet the valley cover.

3. Pay special attention to the corners of the cylinder heads where they meet the end seal surfaces (Use a

bit more silicone here).

4. Position the valley cover in place on the engine and install the supplied bolts.

5. Tighten bolts to 10-12 ft./lbs., starting in the center and working your way to the ends.

6. Place the intake manifold in position and torque manifold bolts to 25 ft. lbs., following the factory torque

sequence.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 1801 Bedienungsanleitung

Edelbrock

Edelbrock 4779 Bedienungsanleitung

Edelbrock

Edelbrock 66112 Bedienungsanleitung

Edelbrock

Edelbrock 15022 Bedienungsanleitung

Edelbrock

Edelbrock Victor Jr. 70057 Bedienungsanleitung

Edelbrock

Edelbrock 7577 Bedienungsanleitung

Edelbrock

Edelbrock 8135 Bedienungsanleitung

Edelbrock

Edelbrock 2114 Bedienungsanleitung

Edelbrock

Edelbrock 389-455 Bedienungsanleitung

Edelbrock

Edelbrock 1711 Bedienungsanleitung

Edelbrock

Edelbrock 1997 Bedienungsanleitung

Edelbrock

Edelbrock 2475 Bedienungsanleitung

Edelbrock

Edelbrock 5728 Bedienungsanleitung

Edelbrock

Edelbrock 5752 Bedienungsanleitung

Edelbrock

Edelbrock 2166 Bedienungsanleitung

Edelbrock

Edelbrock Chevrolet Imapala 5.7L LT1 V8 Bedienungsanleitung

Edelbrock

Edelbrock 5700 Series Bedienungsanleitung

Edelbrock

Edelbrock EFI Fuel Pressure Regulators 1728 Bedienungsanleitung

Edelbrock

Edelbrock 67312 Bedienungsanleitung

Edelbrock

Edelbrock Performer 3764 Bedienungsanleitung

Edelbrock

Edelbrock 17932 Bedienungsanleitung

Edelbrock

Edelbrock 71922 Bedienungsanleitung

Edelbrock

Edelbrock E-Street 2 Bedienungsanleitung

Edelbrock

Edelbrock 68512 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung