Edelbrock Ford Mustang 3381 Bedienungsanleitung

INSTALLATION INSTRUCTIONS

FOR 1987-

2001 Ford Mustang

Catalog #3381 & #3481

Not for use on IRS

§Please read these instructions entirely before beginning. Proper installation is a must to realize the

maximum performance improvements.

IMPORTANT NOTES:

§Upon initial inspection, some new shocks may have a small amount of oil in the area of the seal. This is a

normal occurrence following manufacture and does not indicate a problem with your shocks.

§Any time you are working under a vehicle, be sure to use the proper jack stands and tire chocks to prevent

any shifting or slipping of the car. Never use a jack only to support the vehicle while changing shocks.

§Inspect shock brackets or mounting points before installation to make sure they are not broken or bent.

§Do not attempt to disassemble these shocks. Return damaged shocks to Edelbrock for any necessary

service or repairs. INSTALLATION

Fig. 1 Fig. 2 Fig. 3

Step 1 Support your Mustang with jack stands or on a lift at proper jacking locations.

Step 2 Remove the front wheels; removal of rear wheels is not necessary, but may make it easer to install.

Step 3 Place floor jack under front lower control arm a

nd jack up, applying pressure to the lower control arm for

support when removing the strut.

Step 4 Loosen the lower strut nuts. Move A.B.S. line and bracket out of the way, but do not remove the bolts.

Step 5 Loosen the front upper strut stud nut. The strut stud has a screwdriver slot to hold from turning, use a

24mm wrench on nut and screwdriver in slot to loosen and remove nut (fig. 1).

Step 6 Remove the lower bolts. The strut can now be removed.

Step 7 Remove the dust shield and reinstall on the new strut (fig. 2).

Step 8 Reinstall by reversing removal procedure. Do not tighten the lower nuts at this time.

A-Torque the upper post nut to 56-92 ft. lbs. Use Allen wrench to hold strut from turning (fig. 3).

B -Place jack or jack stand under wheel studs and apply pressure to load spindle and strut, torque the

nuts to 141-199 ft lbs. (Fig. 4).

Step 9 Removal of rear shock, remove the inside trunk liners to gain access to the upper shock nut (fig. 5).

Step 10 Support the rear axle, so when rem

oving the upper mount, the axle does not drop. Remove the upper nut

using a 15 mm socket or wrench.

Step 11 Remove the lower bolts using a 15 mm on the bolt hex and 18 mm on the nut. Shock can now be removed.

Step 12 Install the rear shocks in revers

e order of removal. The rear axle must be supported to load car in order to

tighten the upper stud bushings. Using a 17 mm socket or wrench, tighten until a bulge in the bushing is

noticeable. Do not over tighten. Screw jam nut against nut.

Step 13 Torque lower nuts to 57-75 ft. lbs. (fig. 6). Reinstall wheels and torque to 85-105 ft. lbs.

Fig. 4 Fig. 5 Fig. 6

Parts List

Qty. Description 3381 Qty. Description 3481

1 Front strut P/N3381 1 Rear shock P/N3481

1 1 top stud retaining nut per strut 1 Bushing parts pack per shock

1 1 top polyurethane bushing

Enjoy the improved ride and handling from your new Edelbrock IAS shocks.

Edelbrock Corporation

2700 California Street

Torrance, California 90503

Office (310) 781-2222

Fax (310) 320-1187

Toll-Free Tech Line (800) 416-8628

Tech E-mail: edelbrock@edelbrock.com

PN 84-8154

2001 Edelbrock Corporation Rev. 2/01

INSTALLATION INSTRUCTION

PROOFING FORM

Date: 2/20/01

From: Gary Nelson

To: Jack Mayberry

Part No./

Description: PN 3381/3481 –Shocks for 1994-2001 Ford

Mustang

Reviewed by: Date

Approved by: Date

No. of copies to be printed:

Received by: Date

F0505D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 24502574 LT4 Bedienungsanleitung

Edelbrock

Edelbrock 5645 Bedienungsanleitung

Edelbrock

Edelbrock PRO-FLO XT 3527 Bedienungsanleitung

Edelbrock

Edelbrock 6510 Bedienungsanleitung

Edelbrock

Edelbrock 1727 Bedienungsanleitung

Edelbrock

Edelbrock Performer IAS Bedienungsanleitung

Edelbrock

Edelbrock 65252 Bedienungsanleitung

Edelbrock

Edelbrock 3821 Bedienungsanleitung

Edelbrock

Edelbrock Automobile Parts Bedienungsanleitung

Edelbrock

Edelbrock 5247 Bedienungsanleitung

Edelbrock

Edelbrock 67112 Bedienungsanleitung

Edelbrock

Edelbrock 641570 Bedienungsanleitung

Edelbrock

Edelbrock 5223 Bedienungsanleitung

Edelbrock

Edelbrock Performer 70011 Technisches Handbuch

Edelbrock

Edelbrock Performer RPM 1967 Bedienungsanleitung

Edelbrock

Edelbrock 9300 Betriebsanleitung

Edelbrock

Edelbrock 25-9492 Bedienungsanleitung

Edelbrock

Edelbrock 6502 Bedienungsanleitung

Edelbrock

Edelbrock Performer 4754 Bedienungsanleitung

Edelbrock

Edelbrock Honda TRX300EX Betriebsanleitung

Edelbrock

Edelbrock 70027 Bedienungsanleitung

Edelbrock

Edelbrock ENDURASHINE 63-0299 Bedienungsanleitung

Edelbrock

Edelbrock 7577 Bedienungsanleitung

Edelbrock

Edelbrock 65692 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung