Ekwb SLIM 120 Bedienungsanleitung

SLIM 120 240 360

Starter Liquid Cooling Kit

USER GUIDE

For EK-KIT S series units | 1st Revision, Mar 1st 2016

/ 1 /

EK Water Blocks bears the name of its founder Edvard König, who

started experimenting with liquid cooling in 1999. From the humble be-

ginnings in the early years of the previous decade, the company grew

steadily to become a global premium liquid cooling gear manufacturer.

Today, EKWB offers a complete range of products for liquid cooling,

from a renowned Supremacy line of CPU water blocks, to a wide range

of CoolStream radiators, from in-house developed Vardar High pressure

fans, to market-proven SPC series of liquid cooling pumps and thus pro-

vides overclocking enthusiasts and PC builders with the best of what

the market can offer. EK-KIT S cooling solution is the next step to bring

extreme liquid cooling performance in the hands of dedicated gamers

and PC enthusiasts around the world.

Welcome to EK-World!

Safety precautions

1. Keep and store the product away from the reach of children.

2. Check the component list and condition of the product before installation.

If there is any problem, contact the shop where you have purchased the

problem to get a replacement or refund.

3. EKWB d.o.o. is not responsible for any damages due to external causes,

including but not limited to, improper use, problems with electrical power, ac-

cident, neglect, alteration, repair, improper installation and improper testing.

4. CPU and motherboard are subject to damage if the product is incorrectly

installed.

5. This product is a CPU liquid cooling solution kit, comprising of individual

original EKWB parts. Combining this liquid cooling unit with parts, other

than EK Water Blocks products, may lead to warranty loss.

6. Product warranty period is 24 months.

QUICK INSTALLATION GUIDE

/ 2 /

RADIATOR SPACE CONSTRAINT REQUIREMENTS 5

DOZEN GOOD ADVICES FOR THE NEWCOMERS 6

WATER COOLING SYSTEM 6

GENERAL INFORMATION ON WATER BLOCK COMPATIBILITY 7

INSTALLING THE WATER BLOCK 8

LGA-2011(-3) SOCKET MOTHERBOARDS 8

LGA-115XSOCKET MOTHERBOARDS 10

AMD® SOCKET MOTHERBOARDS 12

INSTALLING THE RADIATOR AND FANS 16

INSTALLING THE RADIATOR AND FANS IN ONE GO 17

INSTALLING THE PUMP-RESERVOIR UNIT 18

CONNECTING THE TUBING 19

ELECTRICAL CONNECTIONS 21

CONNECTING THE PUMP-RESERVOIR UNIT 21

CONNECTING THE FANS 22

RECOMMENDED FILLING AND LEAK-TESTING PROCEDURE 23

FILLING THE SYSTEM FOR THE FIRST TIME 24

DRAINING OF THE LOOP 26

POSSIBILITIES OF EXPANDING THE SYSTEM 27

MAINTENANCE 28

FREQUENTLY ASKED QUESTIONS 29

TROUBLESHOOTING 30

GENERAL LIQUID COOLING PARTS CLEANING GUIDE 31

SUPPORT AND SERVICE 34

SOCIAL MEDIA 34

TABLE OF CONTENT

SCOPE OF DELIVERY 3

REQUIRED TOOLS 4

/ 3 /

SCOPE OF DELIVERY

CPU water Block

with AMD® mounting plate CPU Backplate mechanism Thermal grease

Radiator

Fans Pump-Reservoir combo UNI Pump Bracket

(120mm Fan)

Compression ﬁttings

CPU Mounting mechanism

Coolant Tube ATX Bridging plug

/ 4 /

REQUIRED TOOLS

Fan cable Y-splitter Adapter cable Installation manual

Pair of scissors1L Bottle of distilled water

H20

Phillips-head screwdriver Mixing bottle

/ 5 /

RADIATOR SPACE CONSTRAINT REQUIREMENTS

400 mm (15,75 in)

280 mm (11,02 in)

160 mm (6,30 in)

120 mm (4,72 in)

120 mm (4,72 in) 26 mm (1,02 in)

360 240 120

/ 6 /

DOZEN GOOD ADVICES FOR THE NEWCOMERS

1. In order to lower shipping costs we have decided to enclose only the

coolant concentrate for liquid cooling. Therefore you need to provide 1 liter

(1L) of distilled water. You can get it at every gas station or supermarket.

2. Never run this system on tap water and always use the enclosed cooling

concentrate in correct ratio.

3. Never use alcohol, alcohol derivatives or alcohol based solvents in the

system. Using alcohol might result in permanent damage to liquid cooling

KIT components, especially acrylic parts of the system.

4. Reservoir must be positioned above the height level of the water pump in

order for liquid to ﬂood the pump which is crucial for the ﬁrst start-up.

5. Generally, for optimal performance, the Reservoir must be positioned be-

fore the pump in the water loop.

6. Generally, for optimal performance, the CPU water block should be right

after the Radiator in the water loop.

7. Generally, for optimal performance, the Pump should be positioned before

the Radiator in the water loop.

8. It is best practice to do a proper leak test before using your computer.

9. If you spot any leaks, turn off the power immediately!

10. Optimize tubing length in order to prevent excessive bending and kinking

of the tubing.

11. Never let your pump run dry. If this is happening for a prolonged period

of time you may risk destroying water pump’s bearing, rendering the pump

useless.

12. You are encouraged to periodically clean the radiator assembly as it will

collect dust over time. This is best done with soft wide tip brush and vacu-

um cleaner. See chapter general liquid cooling parts cleaning guide.

WATER COOLING SYSTEM

CPU WATERBLOCK

RESERVOIR-WATER PUMP COMBO

RADIATOR with FANS

COLD AIR

HOT AIR

/ 7 /

GENERAL INFORMATION ON WATER BLOCK COMPATIBILITY

This CPU liquid cooling unit is pre-assembled for use with modern Intel desktop socket

type motherboards. By default (out of the box) this water block supports the following

CPU sockets:

- Intel® Socket LGA-775

- Intel® Socket LGA-115x

- Intel® Socket LGA-1366

- Intel® Socket LGA-2011(-3)

This product is also fully compatible with AMD® AMx/FMx sockets but

requires a user to replace factory installed Intel mounting plate with AMD®

one. The following sockets are then compatible:

- AMD® Socket AMx

- AMD® Socket FMx

Narrow server type LGA-2011 is not supported by default – a Mounting plate

Supremacy LGA-2011 Narrow ILM (EAN: 3830046990600) is mandatory

to install this water block on narrow server type LGA-2011 motherboards.

Replacing the mounting plate requires disassembly of the water block.

WHAT IS ENCLOSED

The following items are enclosed with each EK-Supremacy MX UNI

water block:

- EK-Supremacy MX UNI universal CPU water block

- PreciseMount MX UNI universal CPU mounting mechanism:

• M4 threaded thumb screws (4 pcs)

• LGA-2011 M4 threaded mounting studs (4 pcs)

• Springs (4 pcs)

• M4 threaded thumb nuts (4 pcs)

• Washers (4 pcs)

- AMD® mounting plate

- EK-Supremacy Backplate

• Backplate rubber gasket

• Backplate for Intel LGA-1366 and AMD® socket motherboards

• Backplate for Intel LGA-115x socket motherboards

/ 8 /

LGA-2011(-3) SOCKET MOTHERBOARDS

STEP 1

Prepare the foil bag with mounting mechanism, which is enclosed with the CPU

water block delivery.

Install four (4) speciﬁc LGA-2011 M4 thumb screws into four M4 threaded stubs

on the LGA-2011 socket integrated latch mechanism (ILM). The screws are to be

installed using no tools (i.e. pliers).

It is recommended to remove the motherboard form the PC chassis

before proceeding with installation of the CPU water block because of

the space constraint limitations of various computer cases.

STEP 2

Cleaning the CPU: Wipe the CPU’s contact surface (by using non–abrasive

cloth or Q-tip, as shown on sample photo).

Applying thermal compound: EK recommends blob or line method of applying

the enclosed EK-TIM Ectotherm thermal compound to the CPU heat spreader

(IHS) - see sample photo on right.

The quantity of about two rice grains is just about right. There is no

need to cover the whole IHS. Applying too much thermal grease will

have negative impact on the cooling performance!

STEP 2

Non-abrasive

cloth

Thermal grease

IHS

STEP 1

LGA-2011 M4

Thumb Screw

LGA-2011 M4

Thumb Screw

INSTALLING THE WATER BLOCK

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ekwb Computerhardware Handbücher

ekwb

ekwb EK-XLC PREDATOR 240 Bedienungsanleitung

ekwb

ekwb EK-FC7970 DCII Handbuch

ekwb

ekwb EK-Quantum Magnitude sTRX4 Bedienungsanleitung

ekwb

ekwb EK-Vector RTX 2080 FTW3 Bedienungsanleitung

ekwb

ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM... Bedienungsanleitung

ekwb

ekwb EK-PRO GPU WB AMP/Trinity RTX 4090 - Ni +... Bedienungsanleitung

ekwb

ekwb EK-FB ASUS M5E Leitfaden

ekwb

ekwb EK-Quantum Momentum Aorus X570 Master D-RGB -... Bedienungsanleitung

ekwb

ekwb EK-FC970 GTX TF5 Handbuch

ekwb

ekwb EK-Vector Strix RTX 2070 Backplate Leitfaden

ekwb

ekwb EK-Vector Radeon RX5700 + XT Backplate Bedienungsanleitung

ekwb

ekwb EK-FC Titan Z Handbuch

ekwb

ekwb EK-FC780 GTX Ti Handbuch

ekwb

ekwb Ultra Monoblock EK-FB GA X99 Bedienungsanleitung

ekwb

ekwb EK-Classic GPU Water Block RTX 3080/3090... Bedienungsanleitung

ekwb

ekwb EK-FC470 GTX Handbuch

ekwb

ekwb EK-Quantum Vector2 Trio RTX 3080/90 ABP Set... Bedienungsanleitung

ekwb

ekwb EK-FC580 DCII Leitfaden

ekwb

ekwb EK-FB KIT EVGA SR-X Installationsanleitung

ekwb

ekwb EK-Classic 115 D-RGB Series Bedienungsanleitung

ekwb

ekwb EK-FC980 Handbuch

ekwb

ekwb EK-FB KIT ASUS R5E Leitfaden

ekwb

ekwb EK-FC R9-295X2 Leitfaden

ekwb

ekwb EK-XTOP D5 Handbuch

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

ekwb SLIM 120 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken