Elite Screens CineTension B Series Leitfaden

Rev. 03/28/17 1 www.elitescreens.com

Limit switch adjustment instructions for CineTension B Series

NOTE: Elite Screens does not recommend making unnecessary adjustments to the screen, as improper

adjustments will damage the unit and may void your warranty.

For safety reasons, never disassemble the limit switch.

The upper and lower limit switches are located in the right end of the screen housing when facing the screen.

Please refer to the fig. below to locate the upper and lower limit switches.

NOTE: When turning the limit switches, bear in mind that a full‐circle turn in either direction will create a one

inch adjustment.

A. If you over adjust the rise position, the screen will attempt to go further into the case and cause it jitter

and bounce.

B. If you over adjust the drop position, the screen will begin to reverse itself back up.

C. Reversing the adjustments should bring the screen back to normal operation

White = DROP

Yellow = RISE

The white limit switch is

accessed where the screen is

deployed.

The yellow limit switch can only

be accessed through the hole

located at the bottom right end

of the screen.

Rev. 03/28/17 2 www.elitescreens.com

How to adjust the Retract (rise) position:

If the screen does not retract completely, use the following steps.

1. Press the UP button on the remote first to retract the screen as much as possible.

2. Use the Allen‐wrench to turn the RISE (yellow) switch counter‐clockwise. When you turn the RISE

switch, the screen will retract correspondingly.

3. Stop rotating the switch once the weight bar is inside and in‐line with the opening.

Warning: If you continue to rotate the switch once the weight bar is in‐line with the opening, the screen

will attempt to retract further inside and causing permanent damage to the screen. DO NOT over turn the

switch.

4. If the screen retracts too far in, press the DOWN button on the remote to expose the limit switches.

Rotate the RISE adjustment switch 1‐2 turns clockwise. Then press the UP button on the remote to

see the new retract position.

How to adjust the Drop (top black masking border) position:

Note: All electric screens come with standard top black masking and they cannot be dropped further.

DO NOT use these instructions to try to get more out of your standard black masking drop. Use these

instructions only if you have decreased the amount of your black masking and need to increase it back.

If you need to decrease the amount of the top black masking, use the following steps.

1. Press the DOWN button on the remote first to fully deploy the screen.

2. Use the Allen‐wrench to turn the DROP (white) switch clockwise. When you turn the DROP

adjustment switch, the screen will raise.

3. Stop turning the switch once the screen reaches the desired position.

Warning: If you over‐turn the switch, the screen will raise too high, which may permanently damage the

product.

4. If the screen rises too high, simply turn the DROP adjustment switch counter‐clockwise. Press the

UP button on the remote first and then press DOWN to see the new drop position.

For more information, technical support or your local Elite Screens contact, please visit

www.elitescreens.com

Inhaltsverzeichnis

Andere Elite Screens Projektionsfläche Handbücher

Elite Screens

Elite Screens VMAX2 (Plus) Series Bedienungsanleitung

Elite Screens

Elite Screens M92UWH Bedienungsanleitung

Elite Screens

Elite Screens Kestrel Stage Series Bedienungsanleitung

Elite Screens

Elite Screens Kestrel Stage Series Bedienungsanleitung

Elite Screens

Elite Screens Spectrum Series Bedienungsanleitung

Elite Screens

Elite Screens aeonclr series Bedienungsanleitung

Elite Screens

Elite Screens Home100IWH2-A Handbuch

Elite Screens

Elite Screens Spectrum Series Bedienungsanleitung

Elite Screens

Elite Screens Aeon CineGrey 3D AT Series Bedienungsanleitung

Elite Screens

Elite Screens ezCinema Series Bedienungsanleitung

Elite Screens

Elite Screens Kestrel FE100H Bedienungsanleitung

Elite Screens

Elite Screens ITE139XW3-E8 Bedienungsanleitung

Elite Screens

Elite Screens CineTension 2 Dual Series Bedienungsanleitung

Elite Screens

Elite Screens VMAX2 (Plus) Series Leitfaden

Elite Screens

Elite Screens Saker Tension Series Bedienungsanleitung

Elite Screens

Elite Screens Tripod B Series Bedienungsanleitung

Elite Screens

Elite Screens AR2 Series Bedienungsanleitung

Elite Screens

Elite Screens QuickStand Drape Series Kurzanleitung

Elite Screens

Elite Screens EDGE FREE Aeon Series Bedienungsanleitung

Elite Screens

Elite Screens Kestrel Tab-Tension Series Bedienungsanleitung

Elite Screens

Elite Screens Elite Tripod Series Bedienungsanleitung

Elite Screens

Elite Screens TE100HC2 Bedienungsanleitung

Elite Screens

Elite Screens Elite Ez-Frame Series Bedienungsanleitung

Elite Screens

Elite Screens Evanesce AcousticPro UHD Series Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung

Draper

Draper Envoy Handbuch

SI Dynamic 2 XL Bedienungsanleitung

Draper

Draper Nocturne+ E Montageanleitung