Elite Screens Yard Master Electric Leitfaden

Updated 05/25/17 1 www.elitescreens.com

Yard Master Electric

Vertical Limit Switch Adjustment Instructions

For technical support or further assistance, call 877-511-1211 x604

ATTENTION: Elite Screens does not recommend making unnecessary adjustments to the screen, as

improper adjustments will damage the unit and void your warranty.

Caution: The screen’s Top Black Masking is already set to its maximum distance. There is NO extra

black top drop in the roller. Attempting to increase the drop will damage the motor and VOID your

warranty with Elite Screens. DO NOT use these instructions to try and get more out of your standard

black masking drop. Please contact Elite Screens before making any adjustments.

Adjustment tool needed

The adjustment screws are located on the left side of the screen.（as you are facing the front of the

screen）

5/32” Allen wrench

Lower limit adjustment screw is covered with a

warning sticker.

Updated 05/25/17 2 www.elitescreens.com

Adjustment instructions are as follows:

If the screen is not retracting fully in to the housing: Insert the Allen wrench in to the upper limit

screw and turn it counterclockwise. The screen will rise as you turn the Allen screw.

If the screen doesn’t stop retracting once it reaches the top: Insert the Allen wrench in to the top limit

screw and turn it clockwise about 10 full times at a time. Note: the screen does not react when

making this adjustment. You will need to test the rise by lowering the screen a third of the way and

then retracting it back up. Repeat this step until the motor automatically shuts off when rising.

Upper limit adjustment screw.

Lower limit adjustment hole to

access the lower limit screw.

Updated 05/25/17 3 www.elitescreens.com

To increase the drop of the screen (only applicable if the initial adjustment went too far): Lower the

screen to its fullest extent, then insert the Allen wrench into the lower limit adjustment screw and

turn the limit screw counterclockwise. (1 full turn equals about 1”) Bear in mind that the screen will

drop as you turn the Allen screw. (See next page for diagram)

To decrease the drop of the screen:Press the down button on the remote to lower the screen. Insert

the Allen wrench into the lower limit adjustment screw and turn the limit screw clockwise. (1 full turn

equals about 1”)

Note: The screen will not react when making this adjustment. You will need to raise the screen about

a third of the way and then drop it down again to see the difference in the adjustment.

For a local Elite Screens contact or Technical Support, please visit

www.elitescreens.com

Inhaltsverzeichnis

Andere Elite Screens Projektionsfläche Handbücher

Elite Screens

Elite Screens Elite Tripod Series Bedienungsanleitung

Elite Screens

Elite Screens WhiteBoardScreen Series Bedienungsanleitung

Elite Screens

Elite Screens aeonclr series Bedienungsanleitung

Elite Screens

Elite Screens QuickFold Q100V Bedienungsanleitung

Elite Screens

Elite Screens OMS103HR Bedienungsanleitung

Elite Screens

Elite Screens ZWBMS-58 Bedienungsanleitung

Elite Screens

Elite Screens TE100HC2 Bedienungsanleitung

Elite Screens

Elite Screens Lunette Series Bedienungsanleitung

Elite Screens

Elite Screens ITE139XW3-E8 Bedienungsanleitung

Elite Screens

Elite Screens TE100HC2 Bedienungsanleitung

Elite Screens

Elite Screens F60XWV1 Bedienungsanleitung

Elite Screens

Elite Screens Starling Tab-Tension CLR 3 Series Bedienungsanleitung

Elite Screens

Elite Screens Spectrum Tension Series Bedienungsanleitung

Elite Screens

Elite Screens Kestrel Series Bedienungsanleitung

Elite Screens

Elite Screens Reflexion Series Bedienungsanleitung

Elite Screens

Elite Screens Elite Home Series Bedienungsanleitung

Elite Screens

Elite Screens Evanesce B Series Leitfaden

Elite Screens

Elite Screens Spectrum Series Bedienungsanleitung

Elite Screens

Elite Screens Starling Tab-Tension 2 Series Leitfaden

Elite Screens

Elite Screens FE72V Bedienungsanleitung

Elite Screens

Elite Screens Elite Tripod Series Bedienungsanleitung

Elite Screens

Elite Screens SILVERMAX106H2 Bedienungsanleitung

Elite Screens

Elite Screens Evanesce B Series Kurzanleitung

Elite Screens

Elite Screens Kestrel FE100H Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung

Draper

Draper Envoy Handbuch

SI Dynamic 2 XL Bedienungsanleitung

Draper

Draper Nocturne+ E Montageanleitung