Elite Screens EVANESCE TAB-TENSION Series Kurzanleitung

  

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

  

Section 1: Screen Design

1.1 What is it for?

he Evanesce Tab-Tension is a versatile in-ceiling projection screen that conveniently

disappears from view when not in use. It can be installed from within the above-ceiling

airspace or from below thanks to its removable base panels that were originally designed for

the European market.

1.2 How does it work?

Its award-winning CineWhite™ 1.1 gain matte white tensioned-material provides superb

color temperature with wide diffusion uniformity. he screen is moved by a strong,

fast-acting tubular motor and comes with a full IR/RF wireless, 12-volt trigger and Ethernet

control package.

Section 2: Control System

2.1 Wireless 5-12 Volt Trigger Cable

A wireless 5-12 volt projector trigger automatically drops/rises your screen when your

projector is turned on/off. Eliminates the need to wire the connection from your projector to

the screen for a clean installation

2.2 IR Remote

he infrared remote control requires direct line of sight and works up to 30 feet.

2.3 R Remote

he radio frequency remote control does not require line of sight and works up to 100 feet.

2.4 3-Way Wall Switch

he 3-Way Wall Switch is a detachable switch that connects to the RJ45 port.

2.5 RJ45 port

Allows 3

party control systems integration.

Section 3: Product Features

3.1 Characteristics

Screen Material

• Award winning CineWhite™ 1.1 Gain black backed matte white screen material

• 180º wide-viewing angle

• 4K Ultra D, Active 3D, and DR Ready

  !" #"

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

• Tab-tension cords provide uniform flatness on entire projection surface

• Standard 8" top drop

• Available in the following diagonal sizes:

• 84", 100" and 120" in 4:3 format

• 84", 100", 106", 120" and 135" in 16:9 format

• 94", 108", 114", 126" and 139" in 16:10 format

Design and Installation

• Disappearing recessed in-ceiling design for non-dedicated media rooms

• Aluminum housing with white finish (RAL9003) is strong and moisture resistant

• Integrated ceiling projection screen ships fully assembled, ready to install

• Installation kit included for above or below ceiling

Control System

• Internal Radio Frequency/Infrared receivers with IR, RF remotes included

• Low voltage 3-way wall switch and in-wall RJ45 module included

• Standard 5-12 volt trigger to synchronize screen operation with the projector's power cycle

• Optional in-wall up/down switch (part# ZIW-W)

Quality and Reliability

• ETL, FCC, CE, CB GOSTCE & ISO9001:2008

• Conforms to UL 2043 - Plenum Rated: Suitable for air-handling spaces

• 2-year Parts & Labor manufacturer's warranty

• 3-year warranty offered through ENR-G program (Education, Non-Profit, Religious and

Government)

3.2 Model Numbers

Model Number Diag.

Size

Aspect

Ratio

Viewing

Height

(in)

Viewing

Width

(in)

Screen

Material Gain

Case

Color

N.W.

(lbs)

G.W.

(lbs)

Packaging

Dimensions

(LxWxH)

I E84VW2-E8 84" 4:3 50.4 67.2 CineWhite™ 1.1 White

34.6 47.8 84.3"x7.5"x8.3"

I E100VW2-E8 100" 4:3 60.0 80.0 CineWhite™ 1.1 White

39.5 53.7 97.0"x7.5"x8.3"

I E120VW2-E8 120" 4:3 72.0 96.0 CineWhite™ 1.1 White

44.6 61.6 113.8"x7.5"x8.3"

I E84HW2-E30 84" 16:9 41.2 73.2 CineWhite™ 1.1 White

36.3 50.9 90.2"x7.5"x8.3"

I E100HW2-E8 100" 16:9 49.0 87.2 CineWhite™ 1.1 White

43.8 66.9 106.7"x7.7"x8.7"

I E106HW2-E8 106" 16:9 52.0 92.4 CineWhite™ 1.1 White

44.0 60.0 109.4"x7.5"x8.3"

  !" #"

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

Model Number Diag.

Size

Aspect

Ratio

Viewing

Height

(in)

Viewing

Width

(in)

Screen

Material Gain

Case

Color

N.W.

(lbs)

G.W.

(lbs)

Packaging

Dimensions

(LxWxH)

I E120HW2-E8 120" 16:9 58.8 104.6 CineWhite™ 1.1 White

52.1 77.4 125.6"x7.7"x8.7"

I E135HW2-E8 135" 16:9 66.2 117.7 CineWhite™ 1.1 White

58.7 84.7 139.0"x7.7"x8.7"

I E94XW2-E30 94" 16:10 49.8 79.7 CineWhite™ 1.1 White

53.0 80.1 127.6"x7.7"x8.7"

I E126XW2-E8 126" 16:10 66.8 106.9 CineWhite™ 1.1 White

58.9 85.5 138.6"x7.9"x8.7"

I E139XW2-E8 139" 16:10 73.7 117.9 CineWhite™ 1.1 White

38.4 53.9 97.0"x7.5"x8.3"

Section 4: Screen Material Specifications

4.1 Characteristics

CineWhite™ (Tension Matte White) has broad light dispersion through diffusion uniformity, black &

white contrast and true color rendition making it the most versatile in Elite's tensions screen product

lines. This tension PVC surface is the best choice for today's high-contrast ratio projectors in

commercial or residential presentations.

The CineWhite™ material equals the

performance to our

MaxWhite™ product, but improves the

experience with the superior surface

flatness. Uniform diffusion surface has

black-backing to eliminate light

penetration and is easily washable with

mild soap and water.

eatures & Benefits

• Multi-layer PVC (Polyvinyl chloride) with texture and surface coating

• Gain: 1.1

• View Angle: 180° (90° ±LR)

• Full Lambertian Diffuser- no half gain drop

• Produces exceptional picture quality for

any presentation

• Mildew Resistant

• Active 3D and 4K Ultra D ready

• Surface can be cleaned with (water) moist cotton cloth

Specifications

hickness 0.27 mm

Weight 350 g/m2

Maximum Height 3.2 M (10 ft)

On-axis Gain 1.1

Half-Gain Angle Does not reach half gain

  !" #"

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

4.2 Gain Chart

Section 5: Execution

5.1 Important Safety & Warning Precautions

Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO

extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with lite

Screens. Unapproved changes or modifications (except for cutting the power cord for hardwire

installations) to this unit are prohibited and will void your warranty. For more information, please

contact our Technical Support Department at (877) 511-1211 xt. 604.

• Please retain this user’s guide for future reference.

• To avoid damaging the unit, do not use with any unauthorized accessories not recommended

by the manufacturer.

• Handle the unit carefully during transportation to avoid any damages.

• To ensure safe and reliable operation, direct connection to a properly grounded power source

is advised.

• The power outlet supplying power to the unit should be close to the unit and easily

accessible.

• Do not install the unit on uneven, inclined surfaces;

• Do not install in damp places to avoid an electric shock or short circuit.

• Do not place any heavy objects over the power cord.

  !" #"

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

• Position the power cord properly to avoid creating a trip obstacle.

• To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload

the power cord.

• The internal & external parts of this unit are not end user serviceable. Do not attempt to

disassemble this unit by yourself. No one except authorized technicians can open and make

repairs to this unit.

• Make sure the power source that this unit is connected to has a continuous power flow.

• If there is need to use an extension cord, make sure the cord has an equal rating as the

appliance to avoid over heat.

• Do not handle the power plug when your hands are wet or your feet are in contact with

water.

• Properly dispose of this equipment according to the environmental regulations in your area

when product is no longer of service.

Do not use this unit under the following circumstances.

• Disconnect the power cord under the conditions of heavy rain, wind thunder or lightning.

• Avoid direct sun light, rain shower and moisture.

• Keep away from fire sources and high temperature to prevent this device from overheating.

• Cut off the power supply first before transportation or maintenance.

• To avoid possible injury and/or an electric shock, do not attempt to use this screen if there is

obvious damage or if there are any evident broken parts.

5.2 Installation Warning

The instructions provided in this user’s guide are for reference only. Please consult a

professional installation company for further installation and safety advice. The installer must

insure that proper mounting hardware is used to provide adequate strength suitable for the

installation. Elite creens is not liable for any faulty installations. For limit adjustment

instructions, please contact our Technical upport Department at (877) 511-1211 Ext. 604

The Screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra top black drop in

the roller. Please be aware of this as it will void the limitation of your warranty.

Individual modifications to this product are prohibited and will void the warranty with the

manufacturer. Please contact lite Screens Customer Service for any questions.

  !" #"

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur on a particular installation. If this equipment

causes harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

 Reorient or relocate the receiving antenna of the device which may be casing the interference.

 Increase the separation between the screen and the device’s receiver.

 Connect the equipment into a different power outlet other than the device.

5.3 Pre-Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with

foreign particles such as dust, sawdust, and/or liquids.

NOTE:

Regardless of the mounting method, the screen should be securely supported so that the vibration or

pulling on the viewing surface will not cause the casing to become loose or fall. The installer must

insure the fasteners that are used are of adequate strength and suitable for the installation location.

5.4 Controls and Accessories

A. IR Remote B. RF Remote C. Wall switch control box D. 5-12 volt trigger cable

  !" #"

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

E. IR extended “eye” receiver F. Wireless 5-12v (3.5 mm)

mono trigger cable

G. AAA batteries H. Bubble leveler

5.5 Screen Operation

Electric Current: Depending upon region, your lite Screen will operate on 100v, 110v, or 220v voltage.

1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the outlet.

2. Once the screen has power, you’ll be able to control it using any of the 6 methods described below.

6 ways to control your Evanesce Tab-Tension

1. IR remote control (Item A, Fig 1): The Infrared functions by direct line of sight

contact with a beam range of 30 feet. Aim the IR remote at the “eye” receiver once it has

been connected to the control box’s RJ45 port.

2. IR “Eye” Receiver (Item E, Fig 2): The IR “ ye” Receiver plugs directly into the

control box’s RJ45 port to present a low profile line-of-sight control option for your IR

remote control even in a recessed ceiling installation.

3. RF Remote Control (Item B): The radio waves eliminate the need for a direct line of

sight with a range of 100 feet.

4. 3-Way Wall Switch (Item C, Fig 3): The 3-way wall switch is a wall mount switch

with an up/stop/down button and plugs directly into the control box’s RJ45 port.

S OP

DOWN

Fig.1

IR/RF remote

Fig.3

IR “eye” receiver

Fig.2

Control box Control box

3 Way Wall Switch

(does not have IR sensor)

  !" #"

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

6. Wireless 5-12 volt trigger (Item F, Fig 5): The

RF remote control serves as a dual purpose,

independently as a handheld remote control, or in

conjunction with the Wireless 5-12 volt trigger cable.

The radio frequency technology can be programmed

to send a wireless signal to synchronize its drop/rise

with the projector’s power cycle.

Here’s how to set up your Wireless 5-12 volt trigger | ynchronization Instructions

tep1: Connect one end of the 3.5 mm wireless 5-12 volt trigger cable to the RF remote.

tep 2: Connect the other 3.5 mm end of the wireless 5-12 volt trigger cable to your projector

tep 3: Make sure to unplug your screen from the power outlet

tep 4: Hold the UP button on your RF remote

tep 5: While holding the UP button, plug the screen back to the power outlet

tep 6: Wait 5 seconds and then release the UP button

tep 7: Your 5-12V wireless trigger should now be activated with your screen and ready to be used

and able to control your screen with your projector’s power cycle

Repeat the steps again if not successful.

(Please be aware, the projector on/off cycle may take longer to fully activate. It usually takes

around 20-30seconds for full off and on cycle each time)

5. 5-12 volt trigger (Item D, Fig 4): The built-in 5-12V

trigger input allows your screen to synchronize its drop

& rise with the projector’s power cycle. The screen

deploys when the projector powers up and will retract

when the projector powers down. The 5-12 volt RJ45

cable connects to your projector’s trigger output via a

separate cable that may or may not be provided by the

manufacturer of the projector. The trigger feature will

not work without an output cable from the projector, but

it can be tested by connecting the Red (+) and Green (-)

cable to a 9-volt battery.

RJ45 Input

5-12 volt trigger cable

Fig.4

DC 5-12V out

he back of the projector

Wireless 5-12V trigger cable

Stop

Dow n

Fig 5

  !" #"

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

5.6 Hardware Parts List

lease make sure all parts listed below are included before proceeding with the installation.

5.7 Above Installation Instructions

The vanesce Tab-Tension allows access for above or below ceiling installation. Please follow the

instructions described in the following steps below for your type of installation.

Power

The vanesce Tab-Tension Series includes a

3-Prong Power Cord (2-Prong Power Cord for

some countries) for use in a non-concealed

power outlet. If your installation will be entirely

concealed (including power outlet), lite

Screens strongly recommends a hardwire

connection. Please refer to the image below for

both 110v & 220v wiring information.

Assembly

1. Insert the Hex Screw (B) through the Hanging Bracket’s (C) screw hole and secure with the

Case Rail Nut (A). Slide the Hanging Bracket (C) through the railing on top of the case.

Hardware Parts List

QTY

A. Case Rail Nut

B. Hex Screw

C. Hanging Bracket

D. Suspension Bar

. Washer

F. Hex Nut

G. Suspension Bar J

Hook

H. M8 Top xpanding Bolt

M8 Threaded Rod

J. M8 Screw Nut

K. M8 Hexagonal Screw

L. M8 Screw Washer

M. Installation Bracket

N. Socket Wrench

O. White cover flange panel

I J K

  !" #"

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens aiwan Corp. |Elite Screens Japan | Elite Screens Australia

2. Place the Suspension Bar (D) on the Hanging Bracket (C) and align with the hole as shown

below. Secure the Suspension Bar (D) with the Hex Screw (B), Washer ( ) and the Hex Nut

(F). Install the Suspension Bars (D) to your ceiling according to their distance.

Optional uspension Bar J-Hook (G)

1. Attach the Suspension Bar J- Hook (G) to the bottom of the Suspension Bar (D) and secure

with the Hex Screw (B), Washer ( ) and Hex Nut (F).

B F

Andere Handbücher für EVANESCE TAB-TENSION Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Elite Screens Projektionsfläche Handbücher

Elite Screens

Elite Screens Lunette Series Bedienungsanleitung

Elite Screens

Elite Screens Manual Tab-Tension 2 Series Bedienungsanleitung

Elite Screens

Elite Screens Kestrel Series Bedienungsanleitung

Elite Screens

Elite Screens Elite Home 2 Series Bedienungsanleitung

Elite Screens

Elite Screens ezCinema Series Bedienungsanleitung

Elite Screens

Elite Screens CineTension 3 Series Bedienungsanleitung

Elite Screens

Elite Screens ezFrame Plus Series Bedienungsanleitung

Elite Screens

Elite Screens Starling Tension Series Bedienungsanleitung

Elite Screens

Elite Screens Evanesce Plus Series Bedienungsanleitung

Elite Screens

Elite Screens Raptor Series Bedienungsanleitung

Elite Screens

Elite Screens QuickStand Series Kurzanleitung

Elite Screens

Elite Screens EVANESCE TAB-TENSION Series Leitfaden

Elite Screens

Elite Screens Home100IWH2-A Bedienungsanleitung

Elite Screens

Elite Screens QuickStand Series Bedienungsanleitung

Elite Screens

Elite Screens Home100IWH2-A Handbuch

Elite Screens

Elite Screens Evanesce Tension Series Bedienungsanleitung

Elite Screens

Elite Screens Elite Manual Series Bedienungsanleitung

Elite Screens

Elite Screens Evanesce B Series Leitfaden

Elite Screens

Elite Screens Manual Series Bedienungsanleitung

Elite Screens

Elite Screens VMAX PLUS 4 SERIES Bedienungsanleitung

Elite Screens

Elite Screens Saker Series Leitfaden

Elite Screens

Elite Screens Osprey Tension Dual Series Leitfaden

Elite Screens

Elite Screens Insta-DEM Screen Series Bedienungsanleitung

Elite Screens

Elite Screens Elite Home 2 Series Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung

Draper

Draper Envoy Handbuch

SI Dynamic 2 XL Bedienungsanleitung

Draper

Draper Nocturne+ E Montageanleitung