Elite Screens Spectrum 2 Series Kurzanleitung

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

SPECTRUM 2 SERIES

Section 1: Screen Design

1.1 What is it for?

The Spectrum 2 Series Electric Projection Screen features a streamlined aluminum casing in a

white enamel coating with floating wall/ceiling brackets, designed to allow wood stud

installation.

1.2 How does it work?

It uses Elite’s GREENGUARD®Certified MaxWhite® FG screen material that enhances the

picture quality with a wide viewing angle. Whether in the office or at home, the Spectrum 2 is

the best non-tensioned projection screen available.

Section 2: Product Features

2.1 Characteristics

Screen Material:

•MaxWhite® FG (fiber-glass backing) 1.1 Gain

•Screen material is flat, durable, easy to clean and mildew resistant

•180 degree wide-viewing angle for commercial and residential presentations

•Not compatible with Ultra/Short-throw Projectors

•4 side black masking borders enhance contrast ratio and absorbs projector overshoot

•Black backing on material for sharper picture and clarity

•4K Ultra HD, Active 3D, and HDR Ready

•Available in the following range of diagonal sizes:

•91"/ 100"/ 110" and 120" in 16:9 format

Design and Installation:

•Floating mount brackets allow easy alignment for a wall or ceiling installation

•Suspended ceiling installation capable

•Streamlined aluminum casing with white enamel coating is moisture resistant

•Ships fully assembled with standard 3-prong power connection ready to Plug & Play

Control System:

•3-way integrated up/stop/down control switch

•Tubular motor allows swift operation with a superior weight tolerance and operational lifespan

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

•Optional Remote control kit: Wall box w/ RJ45 port, IR/RF remotes, 5-12 volt projector trigger

cable, Wireless 5-12 volt Mono projector trigger cable, IR “eye” extension (Part# ZPM-RT) - sold

separately

Quality and Reliability:

•Flame Retardant: Complies with NFPA 701 Standards

•GREENGUARD® and GREENGUARD® Gold Certified

•2-year warranty from defects in workmanship

•3-year warranty offered through ENR-G program (Education, Non-profit, Religious, and

Government/Military)

2.2 Model Numbers

Model Number

Diag.

Size

Aspect

Ratio

Viewing

Height

(in)

Viewing

Width

(in)

Screen Material Gain

Case

Color

N.W.

(lbs)

G.W.

(lbs)

Packaging

Dimensions

(LxWxH)

SPM135VT 135" 4:3 81.0 108.0 MaxWhite® FG 1.1 White 40.1 48.4 121.5"x6.5"x6.3"

SPM150VT 150" 4:3 90.0 120.0 MaxWhite® FG 1.1 White 41.8 53.8 134.0"x7.0"x6.2"

SPM91H-E12 91" 16:9 44.6 79.4 MaxWhite® FG 1.1 White 18.6 26.2 89.5"x6.5"x6.3"

SPM100H-E12 100" 16:9 49.0 87.2 MaxWhite® FG 1.1 White 25.3 30.8 99.5"x6.0"x5.8"

SPM110H-E12 110" 16:9 53.9 95.9 MaxWhite® FG 1.1 White 28.6 34.7 110.5"x5.0"x5.5"

SPM120H-E12 120" 16:9 58.8 104.6 MaxWhite® FG 1.1 White 30.0 39.7 118.1"x6.5"x6.1"

SPM138HT 138" 16:9 67.7 120.3 MaxWhite® FG 1.1 White 44.4 51.8 133.7"x6.3"x6.5"

Section 3: Screen Material Specifications

3.1 Characteristics

MaxWhite® Fiberglass (FG) is fiberglass backed for

added stiffness which provides the flattest possible

non-tensioned screen surface with universal

applications. This material provides wide viewing

uniform diffusion while giving precise definition, color

reproduction and black & white contrast. The screen

surface has a black-backing to eliminate light

penetration, is mildew resistant and washable with mild soap and water.

* Manufacturer tip: This is an enhanced matte white product for higher end DLP/LCD projectors

suitable for commercial and residential presentations.

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

Features & Benefits

•Multi-layer weave with textured surface

•Fiberglass backing with black backing

•Gain: 1.1

•View Angle: 180° (90° ± LR)

•Not compatible with Ultra/Short-throw Projectors

•Mildew Resistant

•Active 3D and 4K Ultra HD ready

•Surface can be cleaned with mild soap and water

•Flame Retardant: Complies with NFPA 701 Standards

•GREENGUARD® and GREENGUARD® Gold Certified | UL 2818

3.2 Gain Chart

Specifications

Thickness 0.36 mm

Weight 350 g/m2

Maximum Height 3.2 M (10 ft)

On-axis Gain 1.0

Half-Gain Angle Does not reach half gain

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

Section 4: Execution

4.1 Important Safety & Warning Precautions

Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black

Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved

changes or modifications (except for cutting the power cord for hardwire installations) to this unit are

prohibited and will void your warranty. For more information, please contact our Technical Support

Department at (877) 511-1211 Ext. 604.

•Please retain this user’s guide for future reference.

•To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the

manufacturer.

•Handle the unit carefully during transportation to avoid an y damages.

•To ensure safe and reliable operation, direct connection to a properly grounded power source is

advised.

•The power outlet supplying power to the unit should be close to the unit and easily accessible.

•Do not install the unit on uneven or inclined surfaces.

•Do not put heavy objects on the power cord and position it properly to avoid creating a trip

obstacle.

•Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short

circuit.

•There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by

yourself. No one except authorized technicians can open and make repairs to this unit.

•Make sure the power source this unit is connected to has a continuous power flow.

•If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to

avoid overheat.

•Do not handle the power plug when your hands are wet or your feet are in contact with water.

Do not use this unit under the following circumstances.

•Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.

•Avoid direct Sunshine, rain shower and moisture.

•Keep away from fire sources and high temperature to prevent this device from overheating.

•Cut off the power supply first before transportation or maintenance.

•Fully disconnect from the power supply when the unit is not in use for a long period of time, as

should be done with any other electric household appliance.

•To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is

obvious damage or if there are any evident broken parts.

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

4.2 Installation Warning

Due to various installation environments, the instructions provided in this user’s guide are for

reference only. Please consult a professional installation company for further installation and

safety advice. The installer must insure that proper mounting hardware is used to provide

adequate strength suitable for the installation. Elite Screens is not liable for any faulty

installations.

Individual modifications to this product are prohibited and will void the warranty with the

manufacturer. Please contact Elite Screens Customer Service for any questions.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that the interference will not occur on a particular installation. If this

equipment causes harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures.

Reorient or relocate the receiving antenna of the device which may be casing the interference.

Increase the separation between the screen and the device’s receiver.

Connect the equipment into a different power outlet other than the device.

4.3 Pre-Installation

1. Carefully unpack the screen.

2. Always handle the screen in a leveled position on a clean surface.

3. In order to protect the screen from exposure to stains, keep the screen out of contact with

foreign particles such as dust, sawdust, and/or liquids.

NOTE: Regardless of the mounting method, the screen should be securely supported so that the vibration

or pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure

that the fasteners used are of adequate strength and suitable for the installation location.

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

4.4 Hardware Parts List

4.5 Installation Instructions

Please consult a professional Installer. Elite Screens is not liable for faulty installations.

Flush Mount to the Wall

1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10

Anchors (c).

2. Install the Mounting Brackets (a) to the wall and secure with the M4x50 Screws (b).

MouMountingBracke Mounting Bracket

Fix Plate 1

Anchor

Mounting Bracket

Fix Plate 2

Wall Mounting

Bracket

Hardware Parts List

QTY

a. Mounting Bracket

b. M4x50 Screw

c. M10 Anchor

d. Suspended Ceiling Bracket Connector

e. M5x15 Screw& Bolt

f. Bubble Leveler

M4x50 Screw

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

3. Attach the screen to the Mounting Bracket by inserting the top of the case to the first fix

plate, and securing the back of the case to the second Fix Plate. Make sure the case slots

are securely attached to the Mounting Bracket.

Mounting Bracket Mounting Bracket

Fix Plate 1 Fix Plate 2

Flush Mount to the Ceiling

1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10

Anchors (c).

2. Install the Mounting Brackets (a) to the ceiling and secure with the M4x50 Screws (b).

Screen Case

Mounting Bracket Case Slot 1

Case Slot 2

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

Ceiling M10 Anchor

3. Attach the screen to the Mounting Bracket by inserting the top of the case to the first Fix

Plate, and securing the back of the case to the second Fix Plate. Make sure the case slots

are securely attached to the Hanging Bracket.

Suspended Ceiling using Chains (additional hardware required)

1. You can also hang the screen on a ceiling by using chains (not included).

2. Connect the Suspended Ceiling Bracket Connector (d) to the Mounting Bracket (a) and

secure with the M5x15 Screws& Bolts (e).

M4x50 Screw

Mounting Bracket

Fix Plate 1

Mounting Bracket

Fix Plate

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

3. Insert chains (not included) through the loop holes of the Suspended Ceiling Bracket

Connector (d).

Built in 3 Way Control Switch

1. This Series comes with a 3 Way Control Switch attached to the Power Cord, which is 3.5

meters in length.

2. Use the provided Bubble Leveler (f) to ensure the screen is level before plugging in the

power cord.

Suspended Ceiling Bracket Connector Loop Holes

M5x15 Bolt (e)

Suspended Ceiling Bracket

Connector (d)

Mounting Bracket (a)

M5x15 Screw (e)

3 Way Control

Up/Stop/Down Switch

PRODUCT WHITE PAPER

http://www.elitescreens.com

Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India

Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia

Screen removal from Mounting Brackets

1. Pull down on the Mounting Bracket Release Tab and remove the bottom of the case first,

away from the wall/ceiling, followed by the top of the case.

Section 5: Product Specifications

5.1 Dimensions

Model Number A A1 A2 A3 A4 A5 B B1 B2 B3 C C1 C2 C3

Unit: Inches

SPM135VT 108.0 115.1 2.8 2.0 115.3 115.7 81.0 4.0 87.8 91.6 3.9 3.9 92.0 1.1

SPM150VT 120.0 127.1 2.8 2.0 127.3 127.7 90.0 4.0 96.8 100.6 3.9 3.9 104.1 1.1

SPM91H-E12 79.4 85.6 2.8 1.5 85.7 86.1 44.6 12.0 59.4 62.8 3.5 3.5 62.5 1.1

SPM100H-E12 87.2 94.3 2.8 2.0 94.4 94.8 49.0 12.0 63.8 67.2 3.5 3.5 71.2 1.1

SPM110H-E12 95.9 103.0 2.8 2.0 103.1 103.5 53.9 12.0 68.7 72.2 3.5 3.5 79.9 1.1

SPM120H-E12 104.6 111.7 2.8 2.0 111.9 112.3 58.8 12.0 73.6 77.0 3.5 3.5 88.7 1.1

SPM138HT 120.3 127.4 2.8 2.0 127.6 128.0 67.7 4.0 74.4 78.3 3.9 3.9 104.3 1.1

Unit: mm

SPM135VT 2743 2924 71 51 2929 2939 2057 102 2230 2327 99 99 2337 28

SPM150VT 3048 3228 71 51 3233 3244 2286 102 2459 2555 99 99 2644 28

SPM91H-E12 2017 2174 71 38 2177 2187 1133 305 1509 1595 89 89 1588 28

SPM100H-E12 2215 2395 71 51 2398 2408 1245 305 1621 1707 89 89 1808 28

SPM110H-E12 2436 2616 71 51 2619 2629 1369 305 1745 1834 89 89 2029 28

SPM120H-E12 2657 2837 71 51 2842 2852 1494 305 1869 1956 89 89 2253 28

SPM138HT 3056 3236 71 51 3241 3251 1720 102 1890 1989 99 99 2649 28

Release Tab

Pull Bottom of case first away from wall/ceiling

Andere Handbücher für Spectrum 2 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Elite Screens Projektionsfläche Handbücher

Elite Screens

Elite Screens Osprey Tension Dual Series Bedienungsanleitung

Elite Screens

Elite Screens VMAX2 (Plus) Series Bedienungsanleitung

Elite Screens

Elite Screens QuickStand Series Bedienungsanleitung

Elite Screens

Elite Screens GolfSim Bay Series Bedienungsanleitung

Elite Screens

Elite Screens Elite Home 2 Series Bedienungsanleitung

Elite Screens

Elite Screens Yard Master 2 Series Bedienungsanleitung

Elite Screens

Elite Screens AR2 Series Bedienungsanleitung

Elite Screens

Elite Screens ezFrame Series Bedienungsanleitung

Elite Screens

Elite Screens Tripod B Series Bedienungsanleitung

Elite Screens

Elite Screens TE100HC2 Bedienungsanleitung

Elite Screens

Elite Screens Yard Master 2 Series Bedienungsanleitung

Elite Screens

Elite Screens AEON series Bedienungsanleitung

Elite Screens

Elite Screens Kestrel Series Bedienungsanleitung

Elite Screens

Elite Screens Manual Series Bedienungsanleitung

Elite Screens

Elite Screens CineTension B Series Leitfaden

Elite Screens

Elite Screens AEON series Bedienungsanleitung

Elite Screens

Elite Screens EDGE FREE Aeon Series Bedienungsanleitung

Elite Screens

Elite Screens Saker Tab-Tension Series Bedienungsanleitung

Elite Screens

Elite Screens Tripod B Series Bedienungsanleitung

Elite Screens

Elite Screens FE72V Bedienungsanleitung

Elite Screens

Elite Screens Kestrel Series Bedienungsanleitung

Elite Screens

Elite Screens VMAX 2 Series Bedienungsanleitung

Elite Screens

Elite Screens Elite Tripod Series Bedienungsanleitung

Elite Screens

Elite Screens AEON series Bedienungsanleitung

Beliebte Projektionsfläche Handbücher anderer Marken

FART PRODUKT

FART PRODUKT Standard SCREEN Bedienungsanleitung

Draper

Draper E Series Handbuch

Laarhoven

Laarhoven Companion II Bedienungsanleitung

Renogy

Renogy RMS-LFPS-US Bedienungsanleitung

Da-Lite

Da-Lite ExecutiveElectrol Bedienungsanleitung

Samsung

Samsung S*H65* Bedienungsanleitung

FONESTAR

FONESTAR PPTR-43100-FA Bedienungsanleitung

Slide Clear

Slide Clear Varro XL Bedienungsanleitung

OS РХ-090Н Bedienungsanleitung

Niko

Niko 10-845 Bedienungsanleitung

Speaka Professional

Speaka Professional 2357532 Betriebsanleitung

Sima

Sima XL-72 Bedienungsanleitung

Jasic

Jasic EVO 2.0 ET-200P Bedienungsanleitung

InFocus

InFocus SC-WALL GRY-92H Handbuch

Barco

Barco OverView MVL-615 Bedienungsanleitung

Draper

Draper Envoy Handbuch

SI Dynamic 2 XL Bedienungsanleitung

Draper

Draper Nocturne+ E Montageanleitung