(use the combination that best meets your requirements):
-Extendible tube: designed to provide access to surfaces which are out of reach and make floor
cleaning comfortable, its length can be adjusted by using the adjustment control. (B)
-Floor nozzle: specially designed for cleaning floors (both rugs and carpets and hard floors), its base
has a retractable brush that can be adjusted to two heights for greater efficiency on these floors. It is
advisable to have the brush out for hard floors and the brush in for rugs and carpets.
-Lance: specially designed for getting into cracks and difficult corners.(N)
-Upholstery brush: Especially suitable for cleaning textile surfaces. (N)
USE:
•
Take the length of cable required out of the housing. (M)
•
Connect the appliance to the power supply.
•
Turn the appliance on, from the on/off button. (G)
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
•
Turn the appliance off using the on/off button. (G)
•
Unplug the appliance from the power.
•
Retract the cable by pressing the roller cable button and guide the cable into the appliance. (F)
•
The cable housing means you can remove and have available the required length of cable for
working with the appliance, preventing accident risk situations.
•
Clean the appliance.
CARRY HANDLE/S:
•
This appliance has a handle on the upper part of the body, which facilitates comfortable
transportation (H).
PARKING POSITION:
•
This appliance has its own parking position for comfortable and straightforward storage.
•
To make use of the horizontal parking hook the head's hook onto the hook that is to be found on the
lower part of the appliance (Fig.3).
CLEANING
•
Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
•
Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
•
Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for
cleaning the appliance.
•
Never submerge the appliance in water or any other liquid or place it under running water.
EMPTYING THE DUST BOX
•
Empty the dust container after each use of the vacuum cleaner.
-Disconnect the hose from the vacuum cleaners air intake. (Fig.4)
•
Disconnect the dust box from the appliance (Fig-5).
•
Open the lid of the dust box and empty the contents into the appropriate waste disposal receptacle.
(Fig.6).
•
Check the condition of the motor filter.
•
Close the lid of the dust box.
•
Attach the dust box to the appliance.
•
Connect the hose to the vacuum cleaners air intake. (Fig.1)
CHANGING THE FILTERS:
-Motor filter, it is advisable to periodically check the state of the filter, which should be cleaned/ replaced
after every 50 hours of use.
•
HEPA type air outlet filter (high efficiency air filter which effectively removes spores, ash, dust mites,
pollen ...), it is advisable to periodically check the condition of the filter, it should be cleaned/replaced
after every 50 hours of use, or if a significant drop in suction power is noticed
