Emerson Micro Motion Bedienungsanleitung

Micro Motion®

Model D and DT Sensors

Instruction Manual

Installation and Operation Manual

P/N 1005172, Rev. C

August 2008

are trademarks of Micro Motion, Inc., Boulder, Colorado. Micro Motion is a registered trade name of Micro Motion, Inc., Boulder,

Colorado. The Micro Motion and Emerson logos are trademarks and service marks of Emerson Electric Co. All other trademarks

are property of their respective owners.

Micro Motion®Model D and DT Sensors Instruction Manual iii

Contents

Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Your new sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

The installation process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Additional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Step 2. Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Pipe run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Maximum wiring distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

DT sensor junction box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Environmental limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Valves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Hazardous area installations . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Step 3. Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Flow direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Process fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Step 4. Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Conduit openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Optional Model D600 mounting . . . . . . . . . . . . . . . . . . . . . . . . . 18

DT sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Step 5. Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Hazardous area installations . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Model D sensor junction box . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Model DT sensor cable and junction box . . . . . . . . . . . . . . . . . . 20

Connecting and shielding 9-wire cable . . . . . . . . . . . . . . . . . . . . 21

D600 sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Power supply wiring to the remote booster amplifier . . . . . . . . . 26

Power supply wiring to the integral booster amplifier . . . . . . . . . 27

Wiring from the remote booster amplifier to the sensor . . . . . . . 28

Wiring to a transmitter (D600 sensor with junction box) . . . . . . . 29

Core processor to a 4-wire remote transmitter or remote host . . 32

Sensor grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Step 6. Startup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Zeroing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Configuration, calibration, and characterization . . . . . . . . . . . . . 39

Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

iv Micro Motion®Model D and DT Sensors Instruction Manual

Contents continued

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Zero drift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Erratic flow rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Inaccurate flow rate or batch total . . . . . . . . . . . . . . . . . . . . . . . . 44

Inaccurate density reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Inaccurate temperature reading . . . . . . . . . . . . . . . . . . . . . . . . . 46

Troubleshooting at the transmitter . . . . . . . . . . . . . . . . . . . . . . . 46

Troubleshooting at the sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Appendix A Purge Fittings . . . . . . . . . . . . . . . . . . . . . . 55

Appendix B Rupture Disk . . . . . . . . . . . . . . . . . . . . . . . 59

Appendix C Label Maintenance and

Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Appendix D Return Policy . . . . . . . . . . . . . . . . . . . . . . 65

Micro Motion®Model D and DT Sensors Instruction Manual 1

Before You Begin

Your new sensor Your new Micro Motion®Model D or DT sensor, or D600 sensor and

booster amplifier, is one part of a Coriolis flowmetering system. The

other part is a transmitter.

Transmitter connections

Model D sensors are available with a factory-supplied 9-wire junction

box for connecting to a remotely mounted transmitter, or to a remotely

mounted core processor.

Model DT sensors are available with a 3-foot (1-meter) pigtail of cable

that connects to a user-supplied junction box. The junction box connects

to a remotely mounted transmitter, or to a remotely mounted core

processor.

The D600 has a booster amplifier. The booster amplifier is available with

a factory-supplied 9-wire junction box for connecting to a remotely

mounted transmitter, or with a factory-supplied core processor for

connecting to a 4-wire remotely mounted transmitter or to a user-

supplied remote host.

All Model D and DT sensors may be connected to the Micro Motion

transmitters listed in Table 1. The D600 sensor may be connected to the

transmitters listed in Table 2.

Table 1. Transmitter and sensor compatibility guide

Transmitter

Model D sensor

(factory-supplied junction box)

Model DT sensor

(user-supplied junction box)

Model 1700/2700 (9-wire) X X

Model 3500/3700 (9-wire) X X

RFT9739 (7- or 9-wire) X X

IFT9701 (9-wire) X(1)

RFT9712 (7- or 9-wire) X X

(1)Except D600.

2Micro Motion®Model D and DT Sensors Instruction Manual

Before You Begin continued

The D600 sensor and booster amplifier are available in any of the

configurations described in Table 2. Table 2 also lists the transmitters

that can be used with each configuration.

European installations

This Micro Motion product complies with all applicable European

directives when properly installed in accordance with the instructions in

this quick reference guide. Refer to the EC declaration of conformity for

directives that apply to this product.

The EC declaration of conformity, with all applicable European

directives, and the complete ATEX Installation Drawings and Instructions

are available on the internet at www.micromotion.com/atex or through

your local Micro Motion support center.

Information affixed to equipment that complies with the Pressure

Equipment Directive can be found on the internet at

www.micromotion.com/library.

Sensor components

Components of the sensor are illustrated on pages 3-6.

Table 2. D600 configurations and compatible transmitters

D600 sensor configuration

Booster amplifier location

Booster amplifier wiring

component

Connection to

transmitter Compatible transmitters

Integral to sensor Junction box 9-wire • Model 1700/2700 (with integral core

processor)

• Model 3500/3700 (9-wire)

• RFT9739

• RFT9712

• Remote core processor

Core processor 4-wire • Model 1700/2700

• Model 3500/3700 (MVD)

• Model 2500

• Direct host(1)

Remote from sensor Junction box 9-wire • Model 1700/2700 (with integral core

processor)

• Model 3500/3700 (9-wire)

• RFT9739

• RFT9712

• Remote core processor

Core processor 4-wire • Model 1700/2700

• Model 3500/3700 (MVD)

• Model 2500

• Direct host(1)

(1)A direct host is a user-supplied remote controller, PLC, or other device.

Micro Motion®Model D and DT Sensors Instruction Manual 3

Before You Begin continued

DS025, DH025, DH038, and DS040 sensors

DS065, DS100, DH100, DS150, DH150, DS300, and DH300 sensors

Ground screw

Purge connections

(optional)

Junction box

Sensor housing

Flow direction

arrow

Process

connection

Calibration tag

Approvals tag

Flow direction

arrow

Purge connection

(optional)

Calibration tag Sensor

housing

Junction box

Process

connection

Approvals

tag

Ground screw

Purge connection

(optional)

4Micro Motion®Model D and DT Sensors Instruction Manual

Before You Begin continued

D600 sensor with integral booster amplifier and junction box

D600 sensor with integral booster amplifier and core processor

Sensor housing

Booster

amplifier

Process connection

Customer tag

(if requested)

Snub-mount

connector

Junction box

Flow direction

arrow

Calibration tag

Approval tag

Sensor housing

Calibration tag

Flow direction

arrow

Booster amplifier

Core processor

Process connection

Customer tag (if

requested)

Snub mount connector

Micro Motion®Model D and DT Sensors Instruction Manual 5

Before You Begin continued

D600 sensor with remote booster amplifier and junction box

D600 sensor with remote booster amplifier and core processor

Approval tag

Sensor housing

Remote booster

amplifier

Process connection

Customer tag

(if requested)

Snub-mount

connector

Junction box

Flow direction

arrow

Calibration tag

Explosion-proof wiring

Intrinsically

safe wiring

Approval tag

Factory-supplied wiring

Approval

tag

Explosion-proof wiring

Intrinsically safe

wiring

Flow

direction

arrow

Core

processor Sensor housing

Approval tag

Calibration tag

Remote booster

amplifier

Customer tag

(if requested)

Process connection

Snub mount

connector

Factory-supplied wiring

6Micro Motion®Model D and DT Sensors Instruction Manual

Before You Begin continued

DT065, DT100, and DT150 sensors

The installation process Installing your new sensor involves five steps:

Step 1. Location

Determining the proper location for the sensor, taking into account

hazardous areas, process piping, transmitter location, and valves. See

page 9.

Step 2. Orientation

Determining the desired orientation for the sensor in the process

pipeline. See page 13.

Step 3. Mounting

Installing the sensor in the pipeline. See page 17.

Step 4. Wiring

Connecting the flowmeter cable to the sensor and transmitter. See

page 19.

Step 5. Startup

Requirements for flowmeter startup. See page 39.

Flow direction arrow

Calibration tag

Sensor cable with flexible conduit

Process

connection

Approvals tag

Ground screw

Lifting handle

Sensor housing

Andere Handbücher für Micro Motion

Inhaltsverzeichnis

Andere Emerson Sender Handbücher

Emerson

Emerson Rosemount 248 Bedienungsanleitung

Emerson

Emerson Rosemount 3051HT Bedienungsanleitung

Emerson

Emerson Rosemount 3300 Series Bedienungsanleitung

Emerson

Emerson Rosemount 8712C Konfigurationshandbuch

Emerson

Emerson Rosemount Analytical HART SMART 5081C-HT Bedienungsanleitung

Emerson

Emerson Rosemount 3095FC MultiVariable Bedienungsanleitung

Emerson

Emerson Rosemount 3051P Bedienungsanleitung

Emerson

Emerson Net Safety Millennium II Bedienungsanleitung

Emerson

Emerson Rosemount Analytical Oxymitter 4000 Bedienungsanleitung

Emerson

Emerson Rosemount 4088B MultiVariable Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson Rosemount MultiVariable 3051SMV Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Bedienungsanleitung

Emerson

Emerson Rosemount 5081-T Bedienungsanleitung

Emerson

Emerson Rosemount OCX 8800 Bedienungsanleitung

Emerson

Emerson Rosemount 5081 Bedienungsanleitung

Emerson

Emerson Rosemount 2051HT Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Bedienungsanleitung

Emerson

Emerson Fisher 4210 Bedienungsanleitung

Emerson

Emerson Fisher C1 Bedienungsanleitung

Emerson

Emerson Micro Motion 1700 Kurzanleitung

Emerson

Emerson Micro Motion Transmitters and Discrete Controllers Series... Betriebshandbuch

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson Rosemount 2088 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung