Emerson Rosemount 1408A Bedienungsanleitung

Quick Start Guide

00825-0200-4480, Rev AB

September 2021

Rosemount™ 1408A Level and Flow

Transmitter

Non-Contacting Radar

1 About this guide

This Quick Start Guide provides basic guidelines for the Rosemount

1408A Level and Flow Transmitter. Refer to the 1408A Reference

Manual for more instructions.

1.1 Safety messages

WARNING

Failure to follow safe installation and servicing guidelines could

result in death or serious injury.

Ensure the transmitter is installed by qualified personnel and in

accordance with applicable code of practice.

Use the equipment only as specified in this Quick Start Guide and the

Reference Manual. Failure to do so may impair the protection

provided by the equipment.

Repair, e.g. substitution of components, etc. may jeopardize safety

and is under no circumstances allowed.

WARNING

Process leaks could result in death or serious injury.

Handle the transmitter carefully.

Install and tighten process connectors before applying pressure.

Do not attempt to loosen or remove process connectors while the

transmitter is in service.

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to

and/or misconfiguration of end users’ equipment. This could be

intentional or unintentional and needs to be protected against.

Physical security is an important part of any security program and

fundamental to protecting your system. Restrict physical access by

unauthorized personnel to protect end users’ assets. This is true for all

systems used within the facility.

CAUTION

Hot surfaces

The transmitter and process seal may be hot at high process

temperatures. Allow to cool before servicing.

Note

Be careful not to scratch or otherwise damage the PTFE sealing.

2 Mount transmitter on tank

2.1 Mount the bracket

Procedure

1. Mount the bracket on the wall/ceiling or other flat surface.

T30

2. Apply lubricating paste on the transmitter thread.

Note

The paste must be approved for the application and

compatible with the elastomers used.

3. Secure the transmitter to the bracket.

Mounting options:

•(A) Antenna extension for open air installations

•(B) Lock nut

A B

46 mm

36 mm

2.1.1 Bracket hole pattern

Figure 2-1: Hole Pattern

0.28 (7)

0.43 (11)

1.97

(50)

Ø 0.28 (7)

30°

Dimensions are in inches (millimeters).

2.2 Mounting onto a threaded connection

Refer to Figure 2-2 for the required thread engagement length at the

customer G1 process connection.

Figure 2-2: Thread Engagement Length

A A

A. 0.35 to 0.63 in. (9 to 16 mm)

2.2.1 Mount on a threaded flange connection

Procedure

1. Place a suitable soft gasket on the tank flange.

2. Place the flange over the gasket.

3. Tighten the bolts and nuts with sufficient torque for the flange

and gasket choice.

0.75 in. (19 mm)

4. Apply lubricating paste on the transmitter thread.

Note

The paste must be approved for the application and

compatible with the elastomers used.

5. Mount the transmitter on the tank.

39 mm

Torque 310 in-lb (35 N-m)

2.2.2 Mount the threaded adapter version

Procedure

1. Apply anti-seize paste or PTFE tape on outer threads according

to your site procedures.

2. Mount the threaded adapter on the tank.

41 mm

3. Apply lubricating paste on the transmitter thread.

Note

The paste must be approved for the application and

compatible with the elastomers used.

4. Mount the transmitter on the tank.

39 mm

Torque 310 in-lb (35 N-m)

2.2.3 Mount on a threaded connection

Procedure

1. Apply lubricating paste on the transmitter thread.

Note

The paste must be approved for the application and

compatible with the elastomers used.

2. Mount the transmitter on the tank.

39 mm

Torque 310 in-lb (35 N-m)

Andere Handbücher für Rosemount 1408A

Inhaltsverzeichnis

Andere Emerson Sender Handbücher

Emerson

Emerson Solu Comp Xmt-P-FF/FI Bedienungsanleitung

Emerson

Emerson Rosemount 248 Bedienungsanleitung

Emerson

Emerson Rosemount 3051 Bedienungsanleitung

Emerson

Emerson Rosemount 2088 Bedienungsanleitung

Emerson

Emerson Rosemount 644 with HART Protocol Bedienungsanleitung

Emerson

Emerson Micro Motion 4200 Bedienungsanleitung

Emerson

Emerson Rosemount MultiVariable 3051SMV Bedienungsanleitung

Emerson

Emerson Rosemount 3051SF Series Bedienungsanleitung

Emerson

Emerson Rosemount 5600 Series Bedienungsanleitung

Emerson

Emerson Rosemount 2088 Bedienungsanleitung

Emerson

Emerson Rosemount 3144P Bedienungsanleitung

Emerson

Emerson Rosemount 6888A Bedienungsanleitung

Emerson

Emerson Rosemount 1057 Bedienungsanleitung

Emerson

Emerson Rosemount 3051 Bedienungsanleitung

Emerson

Emerson Fisher FIELDVUE 4400 Bedienungsanleitung

Emerson

Emerson Rosemount 8732E Bedienungsanleitung

Emerson

Emerson MICRO MOTION 2700 Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson Rosemount 1208A Bedienungsanleitung

Emerson

Emerson Rosemount FCL-01 Bedienungsanleitung

Emerson

Emerson Rosemount 3051 Bedienungsanleitung

Emerson

Emerson Rosemount 705 Bedienungsanleitung

Emerson

Emerson Rosemount 848T Bedienungsanleitung

Emerson

Emerson Rosemount 248 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung