Emerson Micro Motion 3500 Bedienungsanleitung

Installation Manual

20000993, Rev BA

February 2015

Micro Motion®Model 3500 Transmitter

(MVD) or Model 3300 Peripheral

Installation manual for rack mount

Safety and approval information

This Micro Motion product complies with all applicable European directives when properly installed in accordance with the

instructions in this manual. Refer to the EC declaration of conformity for directives that apply to this product. The EC declaration of

conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available on

the internet at www.micromotion.com or through your local Micro Motion support center.

Information affixed to equipment that complies with the Pressure Equipment Directive can be found on the internet at

www.micromotion.com/documentation.

For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.

Other information

Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the transmitter

configuration manual. Product data sheets and manuals are available from the Micro Motion web site at www.micromotion.com/

documentation.

Return policy

Micro Motion procedures must be followed when returning equipment. These procedures ensure legal compliance with government

transportation agencies and help provide a safe working environment for Micro Motion employees. Failure to follow Micro Motion

procedures will result in your equipment being refused delivery.

Information on return procedures and forms is available on our web support system at www.micromotion.com, or by phoning the

Micro Motion Customer Service department.

Micro Motion customer service

Email:

•Worldwide: flow.support@emerson.com

•Asia-Pacific: [email protected]

Telephone:

North and South America Europe and Middle East Asia Pacific

United States 800-522-6277 U.K. 0870 240 1978 Australia 800 158 727

Canada +1 303-527-5200 The Netherlands +31 (0) 704 136 666 New Zealand 099 128 804

Mexico +41 (0) 41 7686 111 France 0800917901 India 800 440 1468

Argentina +54 11 4837 7000 Germany 0800 182 5347 Pakistan 888 550 2682

Brazil +55 15 3413 8000 Italy 8008 77334 China +86 21 2892 9000

Venezuela +58 26 1731 3446 Central & Eastern +41 (0) 41 7686 111 Japan +81 3 5769 6803

Russia/CIS +7 495 981 9811 South Korea +82 2 3438 4600

Egypt 0800 000 0015 Singapore +65 6 777 8211

Oman 800 70101 Thailand 001 800 441 6426

Qatar 431 0044 Malaysia 800 814 008

Kuwait 663 299 01

South Africa 800 991 390

Saudia Arabia 800 844 9564

UAE 800 0444 0684

Installation Manual 3

Contents

Chapter 1 Planning....................................................................................................................... 5

1.1 Installation kit ........................................................................................................................ 5

1.2 Choose a location................................................................................................................... 6

1.3 Cable lengths ......................................................................................................................... 7

1.4 Install guide rails and wiring connectors................................................................................. 9

1.5 Install the Model 3500 or Model 3300 in the rack ................................................................... 10

Chapter 2 Mounting..................................................................................................................... 11

2.1 Mount the core processor ...................................................................................................... 11

Chapter 3 Wiring ......................................................................................................................... 13

3.1 Connect input and output wiring ........................................................................................... 13

3.2 Connect the Model 3500 to the sensor .................................................................................. 13

3.3 Wire the sensor to the remote core processor........................................................................ 19

3.4 Connect the power supply wiring........................................................................................... 21

Installation Manual 5

Planning

1 Planning

This installation manual explains basic installation guidelines for mounting the Micro

Motion®Model 3300 or Model 3500 MVD applications platform in a 19-inch (486,2 mm)

rack.

For information on I.S. applications, refer to Micro Motion approval documentation.

For complete instructions about configuration, maintenance, and service, refer to the

instruction manual shipped with the transmitter.

1.1 Installation kit

For mounting in a rack, the Model 3300 or Model 3500 installation kit includes the

following parts:

•One DIN 41612/IEC 60603-2, Type D connector for input/output wiring, with solder

tails (Model 3300 only) or screw terminals

•(Model 3500 only) One DIN 41612/IEC 60603-2, keyed Type D connector for sensor

wiring with screw terminals

•One plug-in connector for power supply wiring

•Four Model 3300 or six Model 3500 slotted cheese-head machine screws, size M2.5x8,

for securing wiring connectors to the rack

WARNING!

Improper installation in a hazardous area can cause an explosion.

For information about hazardous applications, refer to the appropriate Micro Motion approval

documentation, shipped with the meter or available from the Micro Motion web site.

WARNING!

Hazardous voltage can cause severe injury or death.

Install transmitter and complete all wiring before supplying power.

CAUTION!

Improper installation can cause measurement error or meter failure.

Follow all instructions.

6Model 3500 Transmitters or Model 3300 Peripherals - Rack Mount

Planning

1.2 Choose a location

Choose a location for the transmitter based on the requirements described below.

1.2.1 Environmental requirements

Install the transmitter where ambient temperature is between –4 and +140 °F (–20 and

+60 °C).

If multiple applications platforms are installed, provide at least 1 U (1 HE) of vertical space

between racks to ensure proper ventilation. See Figure 1-1.

Figure 1-1: Space requirements for proper ventilation

1.2.2 Dimensions

The Model 3300 or Model 3500 has the following dimensions. See Figure 1-2:

•Height: 128 mm (3 U or 3 HE)

•Width: 142 mm (28 HP or 28 TE)

•Depth: 160 mm

The Model 3300 or Model 3500 conforms to DIN standard EN 60297-3-101 (IEC

60297-3-101) for 19-inch (486,2 mm) racks. Up to three enclosures fit into one rack. See

Figure 1-1.

1 U = 1 HE = 1.750 inches (44,5 mm)

3 U (3 HE)

1 U (1 HE)

Installation Manual 7

Planning

Figure 1-2: Dimensions for mounting in rack

1.3 Cable lengths

Maximum cable length from the sensor to the Model 3500 transmitter depends on the

installation type and cable type.

Installation type Maximum cable length

4-wire remote transmitter Figure 1-3, and Table 1-1 for maximum length of the 4-wire

cable

Remote core processor with remote

transmitter Figure 1-4, and Table 1-1 for maximum length of the 4-wire

cable and the 9-wire cable

25 HP

(25 TE)

3 U

(3 HE)

4 13/16

(122,5)

5 1/16

(128,5)

4 x M2.5x11

1 U = 1 HE = 1.750 inches (44,5 mm)

1 HP = 1 TE = 0.200 inch (5,1 mm)

5 9/16

(142,2)

28 HP (28 TE)

Optional screw terminal

7 11/32

(186,7)

8 33/64

(216,2)

Approvals tag

Intrinsic safety shield

(Model 3500 only)

6 11/16

(169,9)

7 29/32

(200,6)

(25,4)

inches

(mm)

inches

(mm)

Rear rail for mounting connectors

19-inch (486,2 mm) rack

8Model 3500 Transmitters or Model 3300 Peripherals - Rack Mount

Planning

If you are installing the Model 3300 applications peripheral in combination with a

transmitter, the maximum cable length from the transmitter’s frequency output to the

Model 3300’s frequency input is 500 feet (150 meters).

Figure 1-3: 4-wire remote transmitter

Figure 1-4: Remote core processor with remote transmitter

Table 1-1: Maximum cable lengths between sensor and transmitter

Cable type Wire gauge Maximum length

Micro Motion 4-wire Not applicable •1000 ft (300 m) without

Ex-approval

•500 ft (150 m) with

IIC-rated sensors

•1000 ft (300 m) with

IIB-rated sensors

Micro Motion 9-wire Not applicable 60 ft (20 m)

User-supplied 4-wire VDC 22 AWG (0.35 mm2) 300 ft (90 m)

VDC 20 AWG (0.5 mm2) 500 ft (150 m)

VDC 18 AWG (0.8 mm2) 1000 ft (300 m)

RS-485 22 AWG (0.35 mm2) or

larger 1000 ft (300 m)

Model 3500

4-wire cable

Sensor

Core processor

(standard or enhanced)

Sensor

Junction box 9-wire cable

4-wire cable

Model 3500

Core processor

(standard only)

Installation Manual 9

Planning

1.4 Install guide rails and wiring connectors

1.4.1 Guide rails

Positions of guide rails and wiring connectors are indicated in Figure 1-5. Centers of guide

rails should be 27 HP (27 TE) apart, for example, at 1 HP (TE) and 28 HP (TE).

1.4.2 Wiring connectors

The applications platform is shipped with the following equipment:

1. Working from the front of the rack, use the supplied M2.5x8 screws to install the

wiring connectors onto the back of the rack.

•The Model 3500 has six M2.5x8 screws and three connectors

•The Model 3300 has four M2.5x8 screws

2. Use the centers of the guide rails as reference points and refer to Figure 1-5.

Guide rail centers should be 27 HP (27 TE) apart; for example, 1 HP (1 TE) and 28 HP

(28 TE).

3. Install the input/output wiring connector at 4 HP (4 TE) from the neighboring unit or

from the edge of the rack.

4. (Model 3500 only) Install the keyed sensor wiring connector at 16 HP (16 TE) from the

neighboring unit or from the edge of the rack.

5. Install the power supply wiring connector at 25 HP (25 TE) from the neighboring unit

or from the edge of the rack.

Model type Equipment

Model 3300 •A solder-tail or screw-type connector for input/output wiring

•A plug-in connector for power-supply wiring

Model 3500 •A screw-type connector for input/output wiring

•A screw-type connector for sensor wiring

•A plug-in connector for power-supply wiring

10 Model 3500 Transmitters or Model 3300 Peripherals - Rack Mount

Planning

Figure 1-5: Positions of guide rails and wiring connectors

1.5 Install the Model 3500 or Model 3300 in the

rack

1. Align the Model 3500 or Model 3300 with the guide rails.

2. Slide the Model 3500 or Model 3300 into the rack.

Make sure the pins on the back panel make contact with the wiring connectors.

3. Tighten the supplied captive screws to secure the front panel of the Model 3500 or

Model 3300 to the guide rails.

Power supply wiring connector

Input/output wiring connector

Keyed sensor wiring connector

Keys on sensor wiring connector

M2.5x8

Front

Back

Andere Handbücher für Micro Motion 3500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Emerson Sender Handbücher

Emerson

Emerson Rosemount Bedienungsanleitung

Emerson

Emerson Rosemount 3051G Bedienungsanleitung

Emerson

Emerson Rosemount Oxymitter 4000 Bedienungsanleitung

Emerson

Emerson Rosemount 1208C Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Kurzanleitung

Emerson

Emerson Rosemount 644 Bedienungsanleitung

Emerson

Emerson Rosemount 5408 Bedienungsanleitung

Emerson

Emerson Rosemount 5081 Bedienungsanleitung

Emerson

Emerson Rosemount 5081 Bedienungsanleitung

Emerson

Emerson Rosemount 1057 Bedienungsanleitung

Emerson

Emerson Rosemount Analytical HART 5081-A-HT Bedienungsanleitung

Emerson

Emerson Rosemount ET310C Bedienungsanleitung

Emerson

Emerson Rosemount OCX 8800 Bedienungsanleitung

Emerson

Emerson MAS 2600 Bedienungsanleitung

Emerson

Emerson Rosemount 5408 Bedienungsanleitung

Emerson

Emerson Fisher C1 Bedienungsanleitung

Emerson

Emerson MAS 2600 Bedienungsanleitung

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson Rosemount 3144P Bedienungsanleitung

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson PT5N FLR Series Bedienungsanleitung

Emerson

Emerson Rosemount 3051 Series Bedienungsanleitung

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung