Emerson Rosemount HART Modbus VeriCase 3308 Series Bedienungsanleitung

Quick Start Guide

00825-0500-4530, Rev AD

April 2019

Rosemount™ VeriCase User Guide

Rosemount 3308 and 5300 Series Level

Transmitters with HART® and Modbus®

Contents

Overview......................................................................................................................................3

Check contents and verification sheet.......................................................................................... 4

Verify the Rosemount 3308 transmitter....................................................................................... 6

Verify the Rosemount 5300 transmitter..................................................................................... 10

Generate a report.......................................................................................................................13

FAQs.......................................................................................................................................... 14

Quick Start Guide April 2019

2 Rosemount VeriCase

1 Overview

The Rosemount™ VeriCase is a mobile verification tool for the Rosemount

3308 and 5300 Level Transmitters with HART® and Modbus®

communications.

The Rosemount VeriCase accuracy is within ±1 mm.

Figure 1-1 identifies the parts inside the case that you should be familiar with

before performing verification.

Note

The Rosemount VeriCase does not have any hazardous approvals

certifications and should only be used outside of such classified areas.

Figure 1-1: Rosemount VeriCase

A. Transmitter mount

B. Terminal connections

C. Cable switch

D. Temperature display

E. Power input

F. Ground connection

G. USB cable connection

April 2019 Quick Start Guide

Quick Start Guide 3

2 Check contents and verification sheet

2.1 Check contents

Procedure

Open the Rosemount VeriCase and check that it contains the following

items:

•USB stick containing

•User Instructions

•Microsoft® Excel® workbook

•Calibration certificate

•HART modem drivers

•Rosemount Radar Master (for Rosemount 5300 Level Transmitter)

•Instrument Inspector Application™ (for Rosemount 3308 Wireless Level

Transmitter)

•Printed calibration parameters

•Printed certificate

•110/220V Power Supply

•12 VDC Power Cable

•USB A-B cable

•Two terminal connection cables with banana plugs and grippers

2.2 Check the verification sheet

Procedure

1. Open the Excel workbook found on the USB memory stick.

2. Check that the following details in the workbook correspond to the

printed certificate found inside the Rosemount Vericase:

•Serial number and calibration date

•Cable lengths

•Values for temperature correction table

Quick Start Guide April 2019

4 Rosemount VeriCase

2.3 Power up the Rosemount VeriCase

The Rosemount VeriCase can be powered by either a 110V/220V power

supply or a 12VDC power adapter supplied with the Rosemount VeriCase. To

power up the Rosemount VeriCase and connect it to a transmitter head:

Procedure

1. Connect the power cable.

2. Screw the transmitter firmly onto the mount of the faceplate.

3. Insert the terminal connectors in the + and – terminals on the

faceplate and attach the other ends to the terminals of the

transmitter.

4. Connect the USB A-B cable between your computer and the

Rosemount VeriCase.

5. To start the verification procedure, the switch should be turned from

position 0 to position 1.

April 2019 Quick Start Guide

Quick Start Guide 5

3 Verify the Rosemount 3308 transmitter

Prerequisites

1. Fill in the details in the Verification Data tab of the Excel workbook.

Record the serial number of the device from the nameplate of the

transmitter.

2. (Optional) Select the Imperial Units check box to enter data in inches

and Fahrenheit.

Note

There is a possible inaccuracy of 1.25 mm (0,05 in.) when inches are

used for the display.

Procedure

1. Start Instrument Inspector Application.

2. Under HART, double-click the device icon.

Quick Start Guide April 2019

6 Rosemount VeriCase

3. Make sure the cable switch on the Rosemount VeriCase is set to

position 1.

4. Select Service Tools → Routine Maintenance, and then select

Verification.

5. In the Verification window, select Next.

6. Enter the Distance and the Electronics Temperature, displayed on the

Verification window, to the Excel workbook.

Note

Make sure you convert the distance from meters to millimeters.

April 2019 Quick Start Guide

Quick Start Guide 7

7. Enter the VeriCase temperature, displayed on the device, to the Excel

workbook.

8. Switch to the next cable on the Rosemount VeriCase, and then select

Next.

9. Repeat Step 6-Step 8 for all six cable lengths.

10. When all the cables are measured, select Finish, and then select

Next.

Quick Start Guide April 2019

8 Rosemount VeriCase

11. After the configuration is restored, disconnect communication to the

transmitter.

April 2019 Quick Start Guide

Quick Start Guide 9

4 Verify the Rosemount 5300 transmitter

Prerequisites

Open the Rosemount Radar Master and record the serial number and

firmware revision of the device to be tested in the Verification data tab of

the workbook. This information can be found in the Device Properties

window in the Device menu in Rosemount Radar Master.

Note

Inches or millimeters should be selected for measurement units (there is a

possible inaccuracy of 1.25 mm (0,05 in.) when inches are used for the

display).

Procedure

1. Configure device for verification.

a) Select Device → Backup Config to File… and save a backup

file of the current device.

The backup file needs to be reloaded once the verification is

complete.

b) Select Setup → Tank and configure the following parameters

for the transmitter that will be tested:

•Probe type: User Defined

•Probe length: Longest cable length +50 cm (20 in)

•Probe Impedance: 100 Ω

•Reference Pulse Amplitude: 3000 mV

Quick Start Guide April 2019

10 Rosemount VeriCase

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Emerson Sender Handbücher

Emerson

Emerson MICRO MOTION 2700 Kurzanleitung

Emerson

Emerson Rosemount 5400 Series Bedienungsanleitung

Emerson

Emerson Rosemount 1066 Bedienungsanleitung

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson Rosemount 6888A Bedienungsanleitung

Emerson

Emerson Rosemount 5081 Bedienungsanleitung

Emerson

Emerson Fisher C1 Bedienungsanleitung

Emerson

Emerson MAS 2600 Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Bedienungsanleitung

Emerson

Emerson Rosemount Wireless Permasense WT210 Bedienungsanleitung

Emerson

Emerson Rosemount 708 Bedienungsanleitung

Emerson

Emerson Rosemount Oxymitter 4000 Bedienungsanleitung

Emerson

Emerson wirelessHART Rosemount Series Bedienungsanleitung

Emerson

Emerson CSI 9420 Bedienungsanleitung

Emerson

Emerson Liebert SL-31080 Bedienungsanleitung

Emerson

Emerson Rosemount 2090P Bedienungsanleitung

Emerson

Emerson Rosemount 2051G Bedienungsanleitung

Emerson

Emerson Rosemount 5600 Series Bedienungsanleitung

Emerson

Emerson Rosemount ET210 Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson Rosemount 644 Bedienungsanleitung

Emerson

Emerson Rosemount 2051HT Bedienungsanleitung

Emerson

Emerson Rosemount 3051 Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Kurzanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung