Empower Elektrobank 14 Bedienungsanleitung

Version 5.0

Page 1 of 33

Elektrobank 14 Installer & User Manual

Empower Energy Pty Ltd

Unit 23, 10-18 Orchard Rd

Brookvale, NSW, 2100

Australia

www.empowerenergy.com.au

+61 (0)2 8745 8821

Version 5.0

Page 2 of 33

AMENDMENT RECORD

Issue Number

Date

Description

1.0

4th Dec 2020

First draft release sent to Austest for validation

2.0

22nd Apr 2021

Updated to meet all safety standards and CEC listing

requirements

3.0

16th July 2021

Replaced Backup RCD Type B requirement with RCD

Type A requirement. Added 2nd option to protective

earthing option

4.0

31st Jan 2022

Updated to meet new 4777.2:2020

5.0

2nd Mar 2022

Updated for public release

Associated / Referenced documents

Document number /

Revision number

Date

Document title

 
 Version 5.0 
 Page 3 of 33 
1Table of Contents 
 
1TABLE OF CONTENTS...................................................................................................5 
2MARKINGS & SYMBOLS................................................................................................8 
2.1 Battery Markings.......................................................................................................................9 
3EXTERNAL RCD REQUIREMENTS ................................................................................9 
4WARNINGS ...................................................................................................................10 
5DIMENSIONED DRAWING............................................................................................12 
6PACKING LIST..............................................................................................................13 
7MOUNTING THE UNIT .................................................................................................. 14 
7.1 Wall Mount:............................................................................................................................15 
7.1.1 Install wall bracket ..........................................................................................................15 
7.1.2 Mount unit on wall bracket .............................................................................................16 
7.2 Floor Mount............................................................................................................................16 
7.3 Battery Installation..................................................................................................................17 
7.4 Close and fasten door..............................................................................................................19 
8WIRING..........................................................................................................................20 
8.1 External Isolation Device Requirements...................................................................................20 
8.2 Port Locations .........................................................................................................................21 
8.3 Ferrite Attachments ................................................................................................................22 
8.4 Grid Port Including Protective Earthing....................................................................................22 
8.5 Backup Port.............................................................................................................................23 
8.6 UPS Safety Stickers..................................................................................................................24 
8.7 PV Ports ..................................................................................................................................24 
8.8 DRM0......................................................................................................................................25 
8.9 Ethernet..................................................................................................................................25 
8.10 Meter Connections..................................................................................................................26 
8.10.1 Acrel ...............................................................................................................................26 
9COMMISSIONING ......................................................................................................... 28 
9.1 Closing Unit.............................................................................................................................28 
9.2 Connecting to the unit for the first time via its hotspot ...........................................................28 
9.3 Installer Inputs (inc Regional Settings) .....................................................................................28 
9.3.1 Connect the unit to the house internet............................................................................28 
9.3.2 PV Settings......................................................................................................................29 
9.3.3 Grid settings (inc Regional Settings and Power Quality Modes)) ......................................29 

 
 Version 5.0 
 Page 4 of 33 
3.4 Earth Fault Alarm ............................................................................................................31 
3.5 User Training...................................................................................................................31 
3.6 Read-only inverter settings..............................................................................................32 
MAINTENANCE.............................................................................................................33 
1 Turning off the Unit.................................................................................................................33 
2 User Maintenance...................................................................................................................33 
3 Trained Service Professional Maintenance ..............................................................................33 
ELECTRICAL RATINGS................................................................................................35 
APPENDIX A –METER PROGRAMMING..................................................................... 36 
1 Programming the ADL400 meter.............................................................................................36 
 
 
 
 
 

Version 5.0

Page 5 of 33

2Markings & Symbols

1. To identify the location where the operator's manual is stored or to identify

information that relates to the operating instructions. To indicate that the

operating instructions should be considered when operating the device or

control close to where the symbol is placed.

2. To identify equipment that has risk of electric shock.

3. To identify energy storage timed discharge –that is the time required after

disconnecting the unit from all energy sources and turning off the battery

circuit breaker until the capacitor energy storage in the unit is less than

48VDC.

4. To indicate that caution is necessary when operating the device or control

close to where the symbol is placed, or to indicate that the current situation

needs operator awareness or operator action to avoid undesirable

consequences.

5. To identify any terminal which is intended for connection to an external

conductor for protection against electric shock in case of a fault, or the

terminal of a protective earth (ground) electrode.

Version 5.0

Page 6 of 33

2.1 Battery Markings

Battery Type

Secondary (rechargeable) Li or Li-ion

Cell Designation

IFpP/34/201/173/M/-10+40/90

Module Designation

IFpP34/201/173[8S]M/-10+40/90

Battery System Designation

IFpP34/201/173[48S]M/-10+40/90

System Capacity

100Ah

Nominal Voltage

153.6V

Watt-hour

15.36kWh

Caution Statement

WARNING! A battery can present a risk of electrical shock,

fire, or explosion from vented gases. Observe proper

precautions.

Disposal

Electronic Device: Do not throw away

Proper disposal of batteries is required. Refer

to your local codes for disposal requirements.

Recommended Charge

instructions

Charging is only allowed using the provided Elektrobank 14

system, do not try charging with a different charger

3External RCD Requirements

This product requires an external RCD Type A, 30mA to be installed on every

subcircuit powered by the backup port

Version 5.0

Page 7 of 33

4Warnings

1. When the photovoltaic (PV) array is exposed to light, it supplies a d.c. voltage to the PCE.

2. External RCD Type A 30mA is required on backup port (if connected).

3. An RCD is not permitted on the grid/supply side of the device as it is a multi-mode inverter and

an RCD would allow disconnection of the neutral MEN connection for backup loads.

4. It is required that any PV modules connected to the device have an IEC 61730 Class A rating.

5. If the equipment is used in a manner not specified by the manufacturer, the protection provided

by the equipment may be impaired.

6. Only a qualified professional (e.g. service person) may install the Elektrobank 14.

7. Servicing or replacement of batteries shall not be conducted in the field by anyone other than

Empower personnel. Initial installation is allowed as per this manual.

8. CAUTION: Do not dispose of batteries in a fire. The batteries may explode.

9. CAUTION: Do not open or damage batteries. Released electrolyte is harmful to the skin and eyes.

It may be toxic.

10. CAUTION: The backup port should not be used for devices providing safety or health critical

devices

11. SAFE HANDLING: Elektrobank 14 and battery modules are heavy. To minimise risk when handling

the goods, lift and transport the goods carefully and wear personal protective equipment such as

steel-toe boots and gloves. Use of lifting equipment is recommended

12. SAFE TRANSPORT: Always transport the goods to site in the original packaging. During unpacking,

inspect the goods for damage such as large dents or deep scratches, which may indicate the unit

was dropped. Do not use Elektrobank 14 if it is defective or appears damaged in any way,

internal or external. Contact your supplier for further advice.

13. Touch current is above the limit. Ensure 10mm2 copper PE cable is used for connection to PE

terminal.

14. The Elektrobank 14 cannot be used in multiple inverter combinations as per section 5 of the

AS/NZS 4777.2:2020.

Version 5.0

Page 8 of 33

Figure 1 - Warnings from product warning label

Version 5.0

Page 9 of 33

5Dimensioned Drawing

Version 5.0

Page 10 of 33

6Packing List

The product Elektrobank 14 contains the following parts:

1) Main Enclosure box, including:

a. Main Enclosure

b. Wall Mount Bracket

c. Front of House Meter –PN: ADL400/C

d. 3 x Current Transformers –PN: AKH-0.66/K K-24 150/5A

e. Installer Manual

f. Polythene Bag containing

i. 28 x M6 Battery Mounting bolts

ii. 28 x M6 Battery Mounting Washers

iii. Assortment of glands and plugs for cable entry

iv. EMC Ferrites for grid, backup and ethernet wires

v. 4 x Phoenix Contact PV Connectors

2) Battery Assembly 1

3) Battery Assembly 2

4) Battery Assembly 3

5) Battery Assembly 4

6) Battery Assembly 5

7) Battery Assembly 6

Inhaltsverzeichnis

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung