Press the Vmail soft key and enter your Voicemail PIN.
Consultative
: On an active call, press the Trnsfer soft key on the screen, then dial the number
you want to transfer to (your original caller is on hold during this process). You must wait for the
new party to answer the call before being able to complete the transfer. Pressing the Trnsfer soft key
again will complete the transfer.
NOTE:
If the party you are trying to transfer to is busy and doesn’t want to accept the transfer,
you can press the Cancel soft key to disconnect that leg of the call and you will be returned to your
conversation with the original caller.
Blind
: If you don’t want to introduce the caller whom you are transferring, you can press
Trnsfer, then the Blind soft key and enter the number you want to transfer to and then hit the
Dial button.
Make a call to the rst party. Once the party has answered, press the Confrnc soft key and dial the
second number (the other caller is on hold during this step) and press Dial. Once the second party
answers, press the Confrnc soft key again to join all three parties together.
With the handset in the cradle, use the small “+” button at the bottom center of your phone.
While on a call, use the small “+” and “–” buttons at the bottom center of your phone.
check My VoiceMail?
tRansfeR a call?
Make a 3-Way confeRence call?
incRease My RinGeR VoluMe?
adjust My listeninG VoluMe?
Make a call?
From Your ENA SmartVoice IP Phone
Option 1:
With the handset still on hook/in cradle, simply dial the number, then pick up
the handset, or press the Dial button, which will activate the speaker phone.
NOTE:
If you make a mistake while entering the digits, use the “<<” soft key to delete the incorrect
digits before you press the Dial button.
Option 2:
Pick up your handset or press the Speaker button on the phone to activate the
speaker phone. Dial the number and press the Dial button. If you do not press Dial, the phone will
automatically dial the number you’ve inputted in three seconds.
Helpful Hints:
•
If you need extra time to reference the number you’re calling, option 1 above will allow you
all the time you need to enter the number in full.
•
You don’t need to dial 9 for an outside line and you don’t need to dial 1 for Long Distance.
From Your Call Lists
Press the Callers soft key (to access your Received calls list). Once in the list, use the arrow keys
to select the number you want to call and press the Dial button.
OR
Use the arrows on the silver disk to access your call lists.
Down arrow = Received calls
Right arrow = Placed calls
NOTE:
Your Received and Missed calls are combined into one list called Received.
e symbol next to a number means the call was answered while a symbol
means the call was missed.
Buttons:
Refers to the physical hard buttons on the phone. ese are labeled with the name
of the function they perform. ey always perform the same function.
Soft Keys:
Refers to the keys that appear on the LCD screen of your IP phone. ese are called
“soft” because the function they perform changes depending on the state of the phone. You will
notice dierent options appearing on the soft keys when the handset is in the cradle versus on
a call, as well as when you are using soft keys to perform certain tasks. e LCD screen is not
a touch screen; you will need to push the small oval buttons on the silver panel below the soft keys.
buttons VeRsus soft keys:
How
Do I ...
?
= Missed Call = Received Call
