Enable-IT 821 Bedienungsanleitung

Enable-IT 821

Ethernet Extender

Quickstart Guide

Professional Grade Networking

INSTALLING THE 821 ETHERNET EXTENDER

The Enable-IT 821 Ethernet Extender kit has a max distance reach of up to 3,280ft (1km) over

any 1-pair wiring (Telephone, Coax, or Category rated) between the 821 units.

You can add additional 328ft (100m) onto the end of each 821 LAN output ports for a total

distance of 3,936ft (1.2km) from device extension to device extension.

For highest performance use lower gauge wiring like 14AWG ~ 24AWG for the interlink wiring.

We highly recommend that you perform a quick out of the box test to ensure the working order of your

Enable-IT 821 Ethernet Extender units prior to installing. This will also serve to familiarize you with

how easy the process should be. Follow the steps below to perform the Out Of the Box Test.!

Step 1 - Attach the 821 DC power adapter to the 821 Injector unit and to your AC outlet. The green PWR LED !

will indicate the unit is receiving power as well as the 821 56V 65W DC Power Adapter green LED.

Step 2 - Connect the 821 units together using one of the Ethernet LAN Patch cords provided – attach to the "

RJ-45 Interlink port on each 821 unit as shown by the green line connecting the ports in the diagram

above. The PWR and PLC LED indicators on each of the 821 units will provide visual operational

status of the 821 Ethernet Extension kit.!

Step 3 - Attach and test and to confirm your LAN Equipment works through the 821 extension, connect

your Ethernet LAN to the 821 Injector unit LAN port and the remote device/s to the 821 Extender

LAN port and test connectivity. This confirms basic proper operation of the units.

Performing the On-Site Installation

After removing the Enable-IT 821 Ethernet Extender Kit from the box, and performing the Out Of

The Box Testing (OOTBT), all that remains to install the unit on-site is to build the interconnect

wiring and attach the LAN device cabling with the provided Ethernet Patch cords.

Building the 821 Interlink Wiring

The most important aspect of the installation is the correct wiring of the Interlink cabling.

The 821 Interlink port (RJ-45 interface) carries this 1-pair signaling and power over the RJ-45

(pins 1 & 2) - used as transport. If you use more than 1-pair of wiring, such as a CAT5 segment,

the remaining RJ-45 pins 3, 5 and 7 carry positive and RJ-45 pins 4, 6 and 8 carry negative

signal for distance.

For all wiring you will need to crimp a RJ-45 Male head to each end of the contiguous wire run

and using the following (pins 1 & 2) straight through. We recommend using a category rated

twisted pair cable as it is optimized for high throughput frequencies isolated from cross-talk

noise. Insert the completed RJ-45 ends into the 821 Interlink port on each 821 unit.

Cabling Devices to The Enable-IT 821 Extended Ethernet Kit

Attach your remote LAN device to the 821 Extender unit LAN port with Ethernet patch cord

provided. Attach your local LAN to the 821 Injector LAN port with Ethernet patch cord provided.

Attach the 56V - 65W power adapter to the 821 Injector unit.

Attach your local Interlink cabling end to the 821 Injector unit Interlink port – Then do the same

for the remote end and plug into the 821 Extender unit Interlink port. The Green PLC and PWR

LED should both be solid, indicating they each see the remote partner. There is no sync delay!

Your equipment should now be powered up and functioning.

The LED indicators will provide visual operational status of the 821 Ethernet Extender units.

Troubleshooting

First examine the backbone wiring pair and make sure you have solid connections. The PWR and

Interlink PLC LED will be lit solid Green on each 821 unit. The units sync instantly and have no delay.

if either fail to light up…. Then follow the steps below:

1) Make sure your wiring is straight through and not connected to any Telco punch down

blocks; If so remove from the block and use Telco butt clips to bridge wire.

2) Check for a firm connection of the RJ-45 connections in each 821 unit, and power is

applied to the 821 Injector unit. The 821 Extender unit should be receiving power.

3) You can easily isolate any issue by performing an Out Of The Box Test (OOTBT). This

test will confirm the correct working order of your Enable-IT 821 Ethernet Extender Kit.

This will point to a possible issue with your long distance Interlink wiring being

affected by possible outside interference.

821 Extender Unit

RJ-45 Head

821 Injector Unit

Pin 1 & 2

RJ-45 Interlink Cabling up to 3,280ft (1km)

TECHNICAL SUPPORT

Enable-IT, Inc.’s Customer Care Team support is available directly to customers and distributors. All

support requests are processed through the online support portal. This allows us to provide assigned

support ticket numbers in order to bring closure to any technical issues.

Online Technical Services

The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use

this support website as your first source for help as it contains an on-line knowledge base of articles,

documentation, FAQ's and other problem-solving resources. This web-based support resource

provides the quickest solution to the most common technical support issues.

Returning Products for Warranty Repair

Enable-IT warrants to the original purchaser of this described Product ("you" or the "End User") that,

for the limited lifetime period commencing on the date the Product was purchased (the “Warranty

Period"), the Product will be substantially free from defects in materials and workmanship under

normal use and conditions. Lifetime Warranty details here: https://warranty.enableit.com

This warranty does not apply to Products, which are resold as used, repaired or reconditioned.

Electrical or water damage is not covered under this warranty, extended warranties or

Advanced Replacement Program (AREP).

In order to obtain an authorized RMA approval, the End User must complete the required information

online located at https://support.enableit.com Ifyouhavequestionsordifficultycompletingthis

information you may contact the Customer Care Team at 888-309-0910 between the hours of 7:00

a.m. and 4:00 p.m. Pacific Time(PST).

Returning Products for Refund

Enable-IT, Inc. offers a generous 45-Day refund on a single Ethernet Extender Kit only, and is

subject to a 20% Restocking Fee. Shipments without a valid or authorized RMA number, or

sent to our corporate Las Vegas address, can be refused and / or billed for additional shipping.

Sales and Customer Care:

Toll Free US and Canada 888 309-0910

Other International +1 702 924-0402

E Mail [email protected]

[email protected]

RMA Support:

https://support.enableit.com

Inhaltsverzeichnis

Andere Enable-IT Extender Handbücher

Enable-IT

Enable-IT 865QW PRO Bedienungsanleitung

Enable-IT

Enable-IT 865QW PRO Bedienungsanleitung

Enable-IT

Enable-IT 865 Bedienungsanleitung

Enable-IT

Enable-IT 821CP Bedienungsanleitung

Enable-IT

Enable-IT 8955M Bedienungsanleitung

Enable-IT

Enable-IT 824C Bedienungsanleitung

Enable-IT

Enable-IT 860WC PRO Bedienungsanleitung

Enable-IT

Enable-IT 865XC PRO Bedienungsanleitung

Enable-IT

Enable-IT 868 Bedienungsanleitung

Enable-IT

Enable-IT 864 Bedienungsanleitung

Enable-IT

Enable-IT 860XSC PRO Bedienungsanleitung

Enable-IT

Enable-IT 865C PRO Bedienungsanleitung

Enable-IT

Enable-IT 850 CPE Bedienungsanleitung

Enable-IT

Enable-IT 895 Series Bedienungsanleitung

Enable-IT

Enable-IT 824 Bedienungsanleitung

Enable-IT

Enable-IT 8924 Bedienungsanleitung

Enable-IT

Enable-IT 860C Bedienungsanleitung

Enable-IT

Enable-IT 860 PRO Rev C Bedienungsanleitung

Enable-IT

Enable-IT 860 Series Bedienungsanleitung

Enable-IT

Enable-IT 850 Bedienungsanleitung

Enable-IT

Enable-IT 821W Bedienungsanleitung

Enable-IT

Enable-IT 865Q PRO Bedienungsanleitung

Enable-IT

Enable-IT 821CW Bedienungsanleitung

Enable-IT

Enable-IT 865W PRO Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung