Enable-IT 8924 Bedienungsanleitung

Enable-IT

8924 DSLAM

Ethernet Extender

User Manual

documentation may be reproduced in any form or by any means or used to make

any derivative work (such as translation, transformation, or adaptation) without

written permission from Enable-IT, Inc.

Enable-IT, Inc. reserves the right to revise this documentation and to make

changes in content from time to time without obligation on the part of Enable-IT,

Inc. to provide notification of such revision or change.

Enable-IT, Inc. provides this documentation without warranty, term, or condition

of any kind, either implied or expressed, including, but not limited to, the implied

warranties, terms or conditions of merchantability, satisfactory quality, and fitness

for a particular purpose. Enable-IT, Inc. may make improvements or changes in

the product(s) and/or the program(s) described in this documentation at any time.

If there is any software on removable media described in this documentation, it is

furnished under a license agreement included with the product as a separate

document, in the hard copy documentation. If you are unable to locate a copy,

please contact Enable-IT, Inc. and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the

software described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and

developed solely at private expense. Software is delivered as "Commercial

Computer Software" as defined in DFARS 252.227-7014 (June 1995) or as a

"commercial item" as defined in FAR 2.101 (a) and as such is provided with only

such rights as are provided in Enable-IT, Inc.'s standard commercial license for

the Software.

Technical data is provided with limited rights only as provided in DFAR 252.227-

7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You

agree not to remove or deface any portion of any legend provided on any

licensed program or documentation contained in, or delivered to you in

conjunction with, this User Guide.

Unless otherwise indicated, Enable-IT, Inc. registered trademarks are registered

in the United States and may not be registered in other countries.

TABLE OF CONTENTS

CHAPTER 1INTRODUCTION

1.1 PACKAGE CONTENTS

1.2 FEATURES

1.3 SPECIFICATIONS

CHAPTER 2HARDWARE INSTALLATION

2.1 FRONT PANEL

2.1.1 CONNECTORS

2.1.2 LED INDICATORS

2.1.3 RESET BUTTON

2.2 PIN ASSIGNMENT OF THE RJ-21 CABLE

CHAPTER 3WEB CONFIGURATION

3.1 ADMINISTRATION

3.1.1 IP ADDRESS

3.1.2 SWITCH SETTING

3.1.3 CONSOLE PORT INFORMATION

3.1.4 PORT CONFIGURATION

3.1.5 SNMP CONFIGURATION

3.1.6 SYSLOG SETTING

3.1.7 ALARM CONFIGURATION

3.1.8 TEMPERATURE &FAN STATUS

3.1.9 FIRMWARE UPDATE

3.1.10 CONFIGURATION BACKUP

3.1.11 SNTP SETTING

3.2 L2 FEATURES

3.2.1 VLAN CONFIGURATION

3.2.1.1 STATIC VLAN

3.2.1.2 GVRP VLAN

3.2.1.3 QINQ VLAN

3.2.2 TRUNKING

3.2.2.1 FORWARDING &FILTERING

3.2.3.1 IGMP SNOOPING

3.2.4.1 SPANNING TREE

3.2.5.1 SYSTEM CONFIGURATION

3.2.6.1 PERPORT CONFIGURATION

3.2.6.2 INSTANCE

3.2.6.3 INTERFACE

3.2.6.4.1 DHCP RELAY &OPT.82

3.2.6.5 DHCP OPTION 82

3.2.6.6 DHCP RELAY

3.2.6.7 DHCP OPTION 82 ROTUER PORT

3.2.6.8 DHCP OPT. 82 PORT TABLE

3.3 ACL

3.3.1 IPV4

3.3.2 NON-IPV4 54

3.3.3 BINDING

3.4 SECURITY

3.4.1 SECURITY MANAGER

3.4.2 MAC LIMIT 57

3.4.3 802.X CONFIGURATION

3.5 QOS

3.5.1QOS CONFIGURATION

3.5.2 TOS/DSCP

3.6 MONITORING

3.6.1PORT STATUS

3.6.2 PORT STATISTICS

3.7 VDSL

3.7.1 CONFIGURATION

3.7.2 PROFILE TABLE

3.8 RESET SYSTEM

3.9 REBOOT

TECHNICAL SUPPORT

WARRANTY REPAIR

RETURN POLICY

LIMITED WARRANTY

1. Introduction

Thank you for choosing the Enable-IT 8924 Extended Ethernet DSLAM. These

products are the cost-effective switching solution ideal for small businesses,

Telecom, ISP (Internet Service Provider), or SI (System Integration) for a

competitive network edge. The 8924 VDSL2 DSLAM is a 24-port solution with a

2-port Gigabit Ethernet combo interface (TP and SFP) in a 1.5U height design.

This concentrator offers the benefits of high speed connectivity with an intuitive

management system, robust layer 2 features with advanced security settings,

and a reliable hardware design with monitoring system integration.

1.1 Package Contents

The Enable-IT 8924 Extended Ethernet DSLAM includes the following items:

(1) Enable-IT 8924 VDSL2 DSLAM Concentrator

(1) Enable-IT 8924 User Manual

(1) Country Specific Power Cord

(1) DB9-RJ-45 Serial Console Cable

(1) 19” Set of Rack Mountable Brackets and Screws

(4) Rubber Feet for storage

1.2 Features

(24) 10/100BaseX Ethernet ports (2) 10/100/1,000BaseX Ethernet ports and

Ethernet switch controller

Supports SMII for 10/100BaseX ports

Supports GMII/MII/TBI for 10/100/1,000BaseX ports

All packet buffer and control data memory embedded

Flow control support:

o802.3x pause frame uses for full-duplex ports

oCollision-based back-pressure for half-duplex ports, carrier-based

back-pressure not supported

Half and full-duplex operations:

oFull-duplex operation supported on 10/100/1,000Mbps ports

oHalf-duplex operation supported on 10/100Mbps ports only

Supports 802.1D bridge self-learning, storing up to8L + 256 unicast or

multicast addresses

Supports automatic age-out period between 1 to 1,000,000 seconds

Broadcast storm filtering based on ingress port bandwidth

HOL blocking prevention

Deadlock relief

Auto-polling via MDC/MDIO management interface for auto-configuration of

speed, duplex mode, and flow control capability of all Ethernet ports

9K+ jumbo packets supported on per port and per VLAN basis

Supports layer 2 source filtering

Supports 802.1D Spanning Tree Algorithm and Protocol, 802.1w Rapid

Reconfiguration

Flexible per-port VLAN classification option supports port-based VLAN

domain and 802.1Q VLAN domain simultaneously

Supports independent VLAN Learning (IVL) and Shared VLAN Learning (SVL)

Supports 802.1X Port-based Network Access Control

Supports 802.3ad Aggregation of Multiple Link Segments

oStatistical load-balancing algorithm may be configured to be the

function of source and destination MAC addresses, ingress port ID,

source and destination IP addresses, and TCP/UDP source and

destination ports

Supports BPDU, LACP, EAPOL suppression based on per port configuration

Supports 64 VLAN-dependent Spanning Trees

Supports IP multicast and snooping of IGMP and IP multicast routing protocol

PDU

oIncluding IGMP, CBT, OSPF, and PIM v2

IP multicast packets may be forwarded within single VLAN or across multiple

VLANs

oCross-VLAN mode allows each egress port to have its own tag rule

and VID for IP multicast packets

Port mirroring

Supports 802.1p Traffic Priority

ToS-to-802.1p priority mapping is enabled on per-VLAN basis

Flexible per-port prioritization option:

oThe prioritization result can be made to other switches in the network

by replacing priority field in VLAN tag

Four priority egress queues per port

Scheduling algorithms: strict priority or weighted round robin

Four RMON groups (1,2,3,9)

Supports MIB of RFC1213, 1573, 11757, 1643, 2233

Programmable LED output provides:

oSerial LED output provides basic status of all Ethernet ports, or

oPort 24/25 link status and broadcast storm indicator

MAC address table synchronization assistance

Asymmetric VLAN membership for better network security:

oDistinguish ingress VLAN member and egress VLAN member

oPrevents a station to sneak in VLANs set up for common servers

Improved VLAN ingress rules may specify:

oFiltering untagged packets or VLAN tagged packets

oFiltering packets received on non-ingress VLAN member ports

Supports insertion of 2nd tag with different TPIC to VLAN-tagged packets

Port-based ingress rate policing and egress rate pacing

Supports Layer 2/3/4 (Layer 2+) classification:

oStandard-length IPv4 packets can use layer 2 VLAN-tag ID, IP protocol,

Source IP, Destination IP, TCP/UDP Destination Port and Source Port,

and TCP SYN field for classification

oNon-standard or non-IPv4 packets use part of layer 2/3 header for

classification

oUp to 256 different classification rules supported

oEach classification rule is associated with an action code

oPacket and byte counters for all classification rules to record match

statistics

Supports Layer 2+ based VLAN classification scheme:

oIP subnet based and Protocol-based VLAN achievable by means of

layer 2+ classification

oMay override VID in VLAN-tag

Supports filtering, redirecting, and/or mirroring of packets based on Layer 2+

classification result

oRedirects IPv6 packets to IPv6-capable network devices

SMAC/SIP binding for IPv4 packets can be implemented

Layer 2+ packet classification result ay be used to define packet priority

Priority adjustment based on per port profile and per VLAN property

oPriority of a packet can be upgraded or downgraded based on setting

of the ingress port and VLAN

Supports protected port, protected port group, and unprotected port group

VID in transmitted packets can be replaced by a fixed VID associated with the

egress port

oThe VID to be swapped in by egress port can be different than the

default VID for untagged ingress packets

CPU interface: alternatively

o32-bit 33MHz PCI interface

o16-bit PIO interface with three DMA controllers

Programmable byte-swap capability of MIB counter memory access

Programmable event triggered interrupts allowing software to respond to or

ignore an array of exceptions

332-ball PBGA package

1.8V core and SRAM voltage, and 3.3V pad voltage

1.3 Specifications

Hardware

Case:

1.5U High Pizza-Box Type Enclosure

Interface:

24 VDSL2 Ports

(2) RJ-45 100/1,000Mbps Ethernet Combo Ports

Management Ethernet

(1) RS-232 Serial Console

POTS Splitter

LED Indicators:

SYS, ALM, LINK, ACT

(24) VDSL LEDs

Standards Support:

VDSL2 ITU-T G.993.2

VDSL2 Profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a and 30a

802.d L2 Bridging

DHCP Server/Client/Relay

IEEE 802.1q VLAN (port-based VLAN and Protocol-Based VLAN)

VLAN Stacking (Q-in-Q)

IEEE 802.1p Spanning Tree Protocol (STP)

IEEE 802.3ad Link Aggregation

Protocol Support:

IGMP Snooping/Proxy v1, v2 and v3

Multicast Forwarding with IGMP Snooping v1 and v2 (RFC 1112 and RFC

2236)

Multicast MAC address mapping

Up to 512 Multicast Channels

Profile-based Multicast Access Control (up to 24 profiles)

Fast and Normal Leave Modes

Security:

L2 Frame Filtering by MAC Addresses

L3 Frame Filtering by IP Addresses, protocol ID, and TCP/UDP

DHCP and ARP Broadcasting Frames Filtering

Support Secured Forwarding

Management:

Support OAM&P Functions

Support VLAN Priority Queue (IEEE 802.1p)

Support CoS, ToS, DSCP, etc.

Support SNMP v1/v2/v3 and MIB I/II

Web-based Graphical User Interface, Telnet, CLI and SSH

Operating Requirements:

Operating Temperature: 14°F to 122°F (-10°C to 50°C)

Storage Temperature: -40°F to 158°F (-40°C to 70°C)

Relative Humidity: Up to 95% (non-condensing)

2. Hardware Installation

This section shows the front image of the 8924 DSLAM and how to install the

hardware.

2.1 Front Panel

The 8924 DSLAM includes all connectors and LED indicators on its front panel

so only a few installation steps are required to build the network solution.

2.1.1 Connectors

POTS – The 8924 DSLAM includes (24) built-in splitters, POTS, with a

Telco-50/RJ-21 cable for telephone services.

LINE – Line is for connecting (24) VDSL2 ports with a Telco-50/RJ-21

cable.

ALARM – For alarm inputs and outputs.

CONSOLE – Users are able to access the 8924 DSLAM locally with the

CONSOLE port. Via the CONSOLE ports, users are able to configure the

8924 DSLAM with menu-driven interface with any terminal emulation

program, such as, Hyperterminal and Terterm. (115200, 8, None, 1, None)

GE1 & GE2 (Gigabit Ethernet 1 & 2) – For connecting Gigabit Ethernet,

the 8924 DSLAM provides Gigabit Ethernet combo interfaces, TP and

SFP.

oTP: 10/100/1,000 BaseT copper (RJ-45 connector).

oSFP: 1000 Base-SX/LX mini-GBIC slot.

POWER – The connector is for 100V ~ 240V AC power inputs

(50Hz~60Hz, 1.5A).

2.1.2 LED Indicators

2.1.3 Reset Button

The reset button allows the users to reboot the 8924 DSLAM or load the default

settings.



Blinking





Off

VDSL LINK (1 ~ 24) VDSL2 link is active

(transmitting data or

training)

VDSL2 link is

ready

VDSL2 link is

down

RUN/ALARM

System up

Alarm is detected

No alarm

PWR

Power On

Power Off

GE1/GE2

LINK/ACT

SPEED

Andere Handbücher für 8924

Inhaltsverzeichnis

Andere Enable-IT Extender Handbücher

Enable-IT

Enable-IT 860 PRO Rev C Bedienungsanleitung

Enable-IT

Enable-IT 860 Pro Rev B Bedienungsanleitung

Enable-IT

Enable-IT 821WP Bedienungsanleitung

Enable-IT

Enable-IT 860 PRO Rev C Bedienungsanleitung

Enable-IT

Enable-IT 865QW PRO Bedienungsanleitung

Enable-IT

Enable-IT 850 CPE Bedienungsanleitung

Enable-IT

Enable-IT 865XSC PRO Bedienungsanleitung

Enable-IT

Enable-IT 865 Bedienungsanleitung

Enable-IT

Enable-IT 828W Bedienungsanleitung

Enable-IT

Enable-IT 865W PRO Bedienungsanleitung

Enable-IT

Enable-IT 864P Mini DSLAM Bedienungsanleitung

Enable-IT

Enable-IT 865WC PRO Bedienungsanleitung

Enable-IT

Enable-IT 860XS PRO Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Enable-IT

Enable-IT 865 PRO Bedienungsanleitung

Enable-IT

Enable-IT 860XC PRO Bedienungsanleitung

Enable-IT

Enable-IT 864 Mini Bedienungsanleitung

Enable-IT

Enable-IT 865XC PRO Bedienungsanleitung

Enable-IT

Enable-IT 828WP Bedienungsanleitung

Enable-IT

Enable-IT 821W Bedienungsanleitung

Enable-IT

Enable-IT 865C PRO Bedienungsanleitung

Enable-IT

Enable-IT 821CW Bedienungsanleitung

Enable-IT

Enable-IT 8924 Bedienungsanleitung

Enable-IT

Enable-IT 820P Pro Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung