Endress+Hauser FieldEdge SGC200 Bedienungsanleitung

Products Solutions Services

Brief Operating Instructions

FieldEdge SGC200

Bluetooth edge device for connecting measuring

technology to the Netilion Platform

KA01428S/04/EN/01.19

71447688

2019-07-15

Table of contents FieldEdge SGC200

2 Endress+Hauser

Table of contents

1 About this document .............................................................. 2

1.1 Symbols used ......................................................................... 2

2 Basic safety instructions .......................................................... 4

2.1 Requirements for the personnel ............................................................ 4

2.2 Designated use ........................................................................ 4

2.3 Workplace safety ...................................................................... 4

2.4 Operational safety ......................................................................4

2.5 Product safety ......................................................................... 4

3 Product description ............................................................... 5

4 Incoming acceptance and product identification ................................... 5

4.1 Incoming acceptance .................................................................... 5

4.2 Product identification ................................................................... 6

4.3 Storage and transport ................................................................... 6

5 Installation ....................................................................... 7

5.1 Installation conditions ................................................................... 7

5.2 Mounting the device .................................................................... 7

5.3 Post-installation check .................................................................. 9

6 Electrical connection ............................................................ 10

6.1 Connection conditions .................................................................. 10

6.2 Connecting the device .................................................................. 10

6.3 Post-connection check ..................................................................10

7 Operation options ............................................................... 11

8 System integration .............................................................. 11

9 Commissioning .................................................................. 12

9.1 Function check ....................................................................... 12

9.2 Configuring the device ................................................................. 12

1 About this document

1.1 Symbols used

1.1.1 Safety symbols

DANGER

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in

serious or fatal injury.

WARNING

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

serious or fatal injury.

FieldEdge SGC200 About this document

Endress+Hauser 3

CAUTION

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

minor or medium injury.

NOTICE

This symbol contains information on procedures and other facts which do not result in

personal injury.

1.1.2 Symbols for certain types of information

Symbol Meaning Symbol Meaning

Permitted

Procedures, processes or actions that

are permitted.

Preferred

Procedures, processes or actions that

are preferred.

Forbidden

Procedures, processes or actions that

are forbidden.

Tip

Indicates additional information.

Reference to documentation.

Reference to page.

Reference to graphic.

… Series of steps.

Result of a step. Visual inspection.

1.1.3 Symbols in graphics

Symbol Meaning Symbol Meaning

1, 2, 3,... Item numbers

… Series of steps

A, B, C, ... Views A-A, B-B, C-C, ... Sections

Hazardous area

Safe area (non-hazardous area)

1.1.4 SmartBlue icons

Icon Meaning

SmartBlue

Reachable devices

Home

Basic safety instructions FieldEdge SGC200

4 Endress+Hauser

Icon Meaning

Settings

2 Basic safety instructions

2.1 Requirements for the personnel

The personnel must fulfill the following requirements for its tasks:

‣Trained, qualified specialists must have a relevant qualification for this specific function

and task.

‣Are authorized by the plant owner/operator.

‣Are familiar with federal/national regulations.

‣Before starting work, read and understand the instructions in the manual and

supplementary documentation as well as the certificates (depending on the application).

‣Follow instructions and comply with basic conditions.

2.2 Designated use

The FieldEdge SGC200 must be installed, connected and configured in accordance with the

information in these Brief Operating Instructions and is not approved for use in hazardous

areas.

2.3 Workplace safety

For work on and with the device:

‣Wear the required personal protective equipment according to federal/national

regulations.

2.4 Operational safety

Risk of injury.

‣Operate the device in proper technical condition and fail-safe condition only.

‣The operator is responsible for interference-free operation of the device.

2.5 Product safety

The FieldEdge SGC200 meets the legal requirements of the relevant EU directives.

Endress+Hauser has affixed the CE mark as confirmation that the FieldEdge SGC200 has been

successfully tested.

FieldEdge SGC200 Product description

Endress+Hauser 5

3 Product description

The FieldEdge SGC200 enables the integration of Endress+Hauser Bluetooth devices into the

Netilion Platform. The FieldEdge transmits device IDs, device readings and status information.

Connection to the web is via an integrated LTE modem with a global SIM card. The

transmitted data can be retrieved directly via a REST JSON Application Programming Interface

(API) and integrated into the user application. The FieldEdge SGC200 is configured via the

SmartBlue app.

1 2 3 4 5 7

Netilion

 1 Network architecture

1 Endress+Hauser field devices based on Bluetooth® Wireless technology

2 Encrypted wireless remote access

3 FieldEdge SGC200

4 LTE connection

5 Netilion Platform

6 Application Programming Interface (API)

7 User application

The Application Programming Interface (API) is provided as part of the Netilion Connect

Subscription.

4 Incoming acceptance and product identification

4.1 Incoming acceptance

• Check the packaging for visible damage arising from transportation.

• To avoid damage, remove the packaging with care.

• Keep all the accompanying documents.

The system may not be put into operation if the contents are found to be damaged

beforehand. In this case refer to the information on https://netilion.endress.com/legal/terms-

of-service. Return the system to Endress+Hauser in the original packaging where possible.

Incoming acceptance and product identification FieldEdge SGC200

6 Endress+Hauser

4.2 Product identification

4.2.1 Nameplate

 2 FieldEdge SGC200 nameplate

4.2.2 Manufacturer's address

Endress+Hauser Process Solutions AG

Christoph Merian-Ring 12

CH-4153 Reinach

Switzerland

www.endress.com

4.3 Storage and transport

Always use the original packaging when transporting the product.

4.3.1 Ambient temperature range

–40 to 80 °C (–40 to 176 °F)

4.3.2 Storage temperature

–40 to 80 °C (–40 to 176 °F)

4.3.3 Humidity

10 to 95 %

4.3.4 Vibration resistance

DIN EN 60068-2-64

IEC 60068-2-64: 20 to 2 000 Hz(1 m/s)2 Hz

FieldEdge SGC200 Installation

Endress+Hauser 7

5 Installation

5.1 Installation conditions

Please note the following to ensure correct operation of the FieldEdge SGC200:

• Fit the LTE antenna supplied or ordered as an optional extra on the device

• Connect the device to a power supply

• Use the SmartBlue app →  11 to determine the best location for the device

• Use the device in the open air only

• Maximum height 2 000 m

• Fluctuation in the mains voltage ± 10 % maximum

Only use the LTE antenna provided or the optional remote antenna; otherwise the

operating permit will lose its validity.

5.2 Mounting the device

86 mm ⋅ 40 mm ⋅ 110 mm (3.39 in ⋅ 1.57 in ⋅ 4.29 in)

Installation FieldEdge SGC200

8 Endress+Hauser

110 (4.33)

86 (3.39)

100,5 (3.94)

40 (1.57)

97,5 (3.82)

118,44 (4.65)

 3 Dimensions of SCG200 edge device, engineering unit: mm (in)

5.2.1 Installing the mounting bracket

The mounting bracket can be ordered as an optional extra.

FieldEdge SGC200 Installation

Endress+Hauser 9

72 (2.83)

88,8 (3.46)

100 (3.94)

168 (6.61)

110 (4.33)

20,5 (0.79)

31 (1.22)

6 (0.24)

83 (3.27)

6 (0.24)

26,41 (1.02)

55 (2.17)

 4 Dimensions of mounting bracket, engineering unit: mm (in)

5.2.2 Mounting the LTE antenna

The remote LTE antenna can be ordered as an optional extra.

Screw the LTE antenna onto the screw thread. The remote LTE antenna is supplied with a

cable of 3 m in length.

5.3 Post-installation check

Are the mounted components undamaged (visual inspection)? 

Do all the components meet the required specifications? For example:

• Ambient temperature range

• Humidity



Are all the securing screws tightened securely? 

Is the LTE antenna securely tightened? 

Electrical connection FieldEdge SGC200

10 Endress+Hauser

6 Electrical connection

6.1 Connection conditions

NOTICE

Connecting the device to the supply voltage without the antenna

causes damage to the device.

‣Do not operate the device without having the antenna connected.

• Ensure the cable is de-energized when connecting to the FieldEdge SGC200

• Please follow the connection information in these Brief Operating Instructions

• Supply voltage 8 to 30 VDC

• The power unit must be certified in accordance with IEC 60950-1 or IEC61010-1

• Input current 0.2 A

6.2 Connecting the device

1 2

2 1

GND

1 2

1 Socket

2 Plug

6.2.1 Ensuring the degree of protection

IP67

NOTICE

If the housing of the FieldEdge SGC200 is open,

degree of protection IP67 is lost.

‣The housing of the FieldEdge SGC200 must not be opened.

6.3 Post-connection check

Are the system, devices and cables undamaged (visual check)? 

Do the cables comply with the requirements? 

Andere Handbücher für FieldEdge SGC200

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Levelflex M FMP40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag W 800 Technische Daten

Endress+Hauser

Endress+Hauser Proline t-mass 65 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline t-mass 65 MODBUS RS485 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar S PMD75 Handbuch

Endress+Hauser

Endress+Hauser Liquiline System CA80AM Bedienungsanleitung

Endress+Hauser

Endress+Hauser Hart Micropilot FMR60B Technische Daten

Endress+Hauser

Endress+Hauser Gammapilot M FMG60 Bedienungsanleitung

Endress+Hauser

Endress+Hauser SpectraSensors J22 TDLAS Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquicap M FTI51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Stamolys CA71CL Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic Flow 90 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag W 400 HART Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promass E 200 Handbuch

Endress+Hauser

Endress+Hauser Levelflex FMP51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR54 Montageanleitung

Endress+Hauser

Endress+Hauser FHG65 Handbuch

Endress+Hauser

Endress+Hauser Deltabar S FMD76 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promass 80E Handbuch

Endress+Hauser

Endress+Hauser Micropilot FMR67 Handbuch

Endress+Hauser

Endress+Hauser Prosonic Flow 90 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Hart Micropilot FMR60B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline 500 Technische Daten

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung