Endress+Hauser Proline t-mass 65 MODBUS RS485 Bedienungsanleitung

BA00116D/06/EN/13.10

71123867

Valid as of version

V 3.06.XX (Device software)

Description of Device Functions

Proline t-mass 65

MODBUS RS485

Thermal Mass Flow Measuring System

Proline t-mass 65 MODBUS RS485 Table of contents

Endress+Hauser 3

Table of contents

1 The function matrix: layout and use. . . 4

2 Illustration of the function matrix. . . . . 5

3 MEASURING VALUES . . . . . . . . . . . . . 7

4 SYSTEM UNITS . . . . . . . . . . . . . . . . . . 8

5 QUICK SETUP . . . . . . . . . . . . . . . . . . 11

6 OPERATION . . . . . . . . . . . . . . . . . . . 23

7 USER INTERFACE . . . . . . . . . . . . . . . 25

8 TOTALIZER 1/2. . . . . . . . . . . . . . . . . 28

9 HANDLING TOTALIZER . . . . . . . . . . 30

10 STATUS INPUT . . . . . . . . . . . . . . . . . 31

11 COMMUNICATION. . . . . . . . . . . . . . 33

12 PROCESS PARAMETER . . . . . . . . . . . 35

13 GAS . . . . . . . . . . . . . . . . . . . . . . . . . . 39

14 HEAT FLOW . . . . . . . . . . . . . . . . . . . 44

15 SYSTEM PARAMETER . . . . . . . . . . . . 46

16 SENSOR DATA. . . . . . . . . . . . . . . . . . 47

17 SUPERVISION . . . . . . . . . . . . . . . . . . 51

18 SIMULATION SYSTEM. . . . . . . . . . . . 52

19 SENSOR VERSION . . . . . . . . . . . . . . . 53

20 AMPLIFIER VERSION . . . . . . . . . . . . 54

21 Factory settings . . . . . . . . . . . . . . . . . 55

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

The function matrix: layout and use Proline t-mass 65 MODBUS RS485

4Endress+Hauser

1 The function matrix: layout and use

The function matrix is a two-level construction: the groups form one level and the groups' functions

the other. The groups are the highest-level grouping of the control options for the measuring device.

A number of functions is assigned to each group. You select a group in order to access the individual

functions for operating and configuring the measuring device.

An overview of all the groups available is provided in the table of contents on Page 3 and in the

graphic representation of the function matrix on Page 6. Page 6 also contains an overview of all the

functions available with the page references to the specific function description. A description of the

individual functions is provided on page 7 and onwards.

A0001142

>3s

-+E

Esc

E EEEE

–

Esc

–

Esc

–

Esc

–

Proline t-mass 65 MODBUS RS485 Illustration of the function matrix

Endress+Hauser 5

2 Illustration of the function matrix

Groups/function groups Functions

MEASURING VALUES ä7 MASS FLOW CORRECTED VOLUME

FLOW HEAT FLOW TEMPERATURE



SYSTEM UNITS ä8 UNIT MASS FLOW UNIT CORRECTED

VOLUME FLOW

UNIT CALORIFIC VALUE

MASS

UNIT CALORIFIC VALUE

CORRECTED VOLUME

UNIT HEAT FLOW UNIT PRESSURE UNIT TEMPERATURE UNIT DENSITY

UNIT LENGTH

QUICK SETUP ä11 QUICK SETUP

COMMISSIONING

QUICK SETUP

COMMUNICATION QUICK SETUP SENSOR QUICK SETUP GAS

QUICK SETUP PRESSURE QUICK SETUP HEAT FLOW T-DAT SAVE/LOAD

OPERATION ä23 LANGUAGE ACCESS CODE DEFINE PRIVATE CODE STATUS ACCESS

ACCESS CODE COUNTER

USER INTERFACE ä25 ASSIGN LINE 1 ASSIGN LINE 2 100% VALUE LINE 1 100% VALUE LINE 2

FORMAT DISPLAY DAMPING CONTRAST LCD BACKLIGHT

TEST DISPLAY

TOTALIZER 1/2 ä28 ASSIGN TOTALIZER SUM OVERFLOW UNIT TOTALIZER

RESET TOTALIZER

HANDLING

TOTALIZER ä30 RESET ALL TOTALIZERS FAILSAFE MODE



STATUS INPUT ä31 ASSIGN STATUS INPUT ACTIVE LEVEL MINIMUM PULSE WIDTH ACTUAL STATUS INPUT

SIMULATION STATUS

INPUT

VALUE SIMULATION

STATUS INPUT

COMMUNICATION ä33 TAG NAME FIELDBUS ADDRESS BAUDRATE TRANSMISSION MODE

PARITY BYTE ORDER DELAY TELEGRAM REPLY WRITE PROTECTION

SCAN LIST REG. 1...16

PROCESS PARAMETER ä35 PROCESS PRESSURE 1 PROCESS PRESSURE 2 PROCESS PRESSURE REFERENCE PRESSURE



REFERENCE

TEMPERATURE REFERENCE DENSITY NET CALORIFIC VALUE GROSS CALORIFIC VALUE

MOLE % GAS 1 ASSIGN LOW FLOW CUT

OFF

ON-VALUE LOW FLOW

CUT OFF

OFF-VALUE LOW FLOW

CUT OFF

ZERO POINT ADJUST INSTALLATION FACTOR

Illustration of the function matrix Proline t-mass 65 MODBUS RS485

6Endress+Hauser

GAS ä39 SELECT GROUP NUMBER OF GASES GAS TYPE 1 MOLE % GAS 1

DESCRIPTION CORRECTION FACTOR REFERENCE DENSITY GAS TYPE 2 to 8

MOLE % GAS 2 to 8 CHECK VALUES SAVE CHANGES

HEAT FLOW ä44 CALORIFIC VALUE TYPE MODE 1 HEATING VALUE 1 MODE 2

HEATING VALUE 2

REFERENCE

COMBUSTION

TEMPERATURE

SYSTEM PARAMETER ä46 POSITIVE ZERO RETURN FLOW DAMPING



SENSOR DATA ä47 PIPE TYPE PIPE STANDARD NOMINAL DIAMETER OUTER DIAMETER

WALL THICKNESS INTERNAL DIAMETER INTERNAL HEIGHT INTERNAL WIDTH

MOUNTING MOUNTING SET LENGTH INSERTION DEPTH ZERO POINT

FLOW CONDITIONER

SUPERVISION ä51 ACTUAL SYSTEM

CONDITION

PREVIOUS SYSTEM

CONDITION ALARM DELAY SYSTEM RESET

OPERATION HOURS HOURS SINCE RESET

SIMULATION SYSTEM ä52 SIMULATION FAILSAFE

MODE

SIMULATION

MEASURAND

VALUE SIMULATION

MEASURAND



SENSOR VERSION ä53 SENSOR TYPE SERIAL NUMBER TRANSDUCER SERIAL

NUMBER

SOFTWARE REVISION

NUMBER S-DAT



PRE-AMPLIFIER

SOFTWARE REVISION

NUMBER

PRE-AMPLIFIER

HARDWARE REVISION

NUMBER

AMPLIFIER VERSION ä54 DEVICE SOFTWARE HARDWARE REVISION

NUMBER AMPLIFIER

SOFTWARE REVISION

NUMBER AMPLIFIER

SOFTWARE REVISION

NUMBER T-DAT

I/O MODULE TYPE SOFTWARE REVISION

NUMBER I/O MODULE

Groups/function groups Functions

Proline t-mass 65 MODBUS RS485 MEASURING VALUES

Endress+Hauser 7

3 MEASURING VALUES

Function description, MEASURING VALUES group

!Note!

The engineering unit of the measured variable displayed here is configured in the SYSTEM UNITS group (ä8)

MASS FLOW Description

The currently measured mass flow appears on the display.

Display:

5-digit floating-point number, including unit

e.g. 462.87 kg/h; 731.63 lb/min

MODBUS register:

Data type:

Access:

2007

Float

read

CORRECTED VOLUME FLOW Description

The calculated corrected volume flow appears on the display.

The corrected volume flow is calculated from the measured mass flow and the

reference density of the gas.

Display:

5-digit floating-point number, including unit

e.g. 104.97 Nm3/h; 110.73 Sm3/h; etc.

MODBUS register:

Data type:

Access:

2011

Float

read

HEAT FLOW Description

The calculated heat flow appears on the display.

Display:

5-digit floating-point number, including unit,

(e.g. 175.00 kJ/h; 50.000 kBtu/h; etc.)

MODBUS register:

Data type:

Access:

2005

Float

read

TEMPERATURE Description

The currently measured temperature appears on the display.

Display:

5-digit fixed-point number, incl. unit and sign

e.g. –23.4 °C, 160.0 °F, 295.4 K

MODBUS register:

Data type:

Access:

2017

Float

read

SYSTEM UNITS Proline t-mass 65 MODBUS RS485

8Endress+Hauser

4SYSTEMUNITS

Function description, SYSTEM UNITS group

UNIT MASS FLOW Description

For selecting the unit required and displayed for the mass flow.

The unit you select here is also valid for:

• Low flow cut off

The following time units can be selected:

s = second, m = minute, h = hour, d = day

Options

SI:

0…3 = Gram g/time unit

4…7 = Kilogram kg/time unit

8…11 = Ton t/time unit

US:

12…15 = Ounce oz/time unit

16…19 = Pound lb/time unit

20…23 = Ton ton/time unit

Factory setting

kg/h or lb/h (country dependent ä55)

MODBUS register:

Data type:

Access:

2101

Integer

read/write

UNIT CORRECTED VOLUME

FLOW

Description

For selecting the unit required and displayed for the corrected volume flow.

The unit you select here is also valid for:

• Low flow cut off

The following time units can be selected:

s = second, m = minute, h = hour, d = day

Options

SI:

0…3 = Norm cubic meter Nm³/time unit

4…7 = Norm liter Nl/time unit

US:

8…11 = Standard cubic meter Sm³/time unit

12…15 = Standard cubic feet Scf/time unit

Factory setting

Nm³/h or Sm³/h (country dependent ä55)

MODBUS register:

Data type:

Access:

2105

Integer

read/write

UNIT CALORIFIC VALUE

MASS

Description

For selecting the unit required and displayed for the gross/net calorific value.

Options (SI units)

0 = kJ/kg

1 = MJ/kg

2 = kWh/kg

3 = MWh/kg

4 = kcal/kg

5 = Mcal/kg

Options (US units)

6 = Btu/lb

7 = kBtu/lb

Factory setting

MJ/kg or kBtu/lb (country dependent ä55)

MODBUS register:

Data type:

Access:

2153

Integer

read/write

Proline t-mass 65 MODBUS RS485 SYSTEM UNITS

Endress+Hauser 9

UNIT CALORIFIC VALUE

CORRECTED VOLUME

Description

For selecting the unit required and displayed for the calorific value based on the

corrected volume.

Options (SI units):

0 = kJ/Nm³

1 = MJ/Nm³

2 = kWh/Nm³

3 = MWh/Nm³

4 = kcal/Nm³

5 = Mcal/Nm³

Options (US units):

6 = Btu/Scf

7 = kBtu/Scf

Factory setting

MJ/Nm³ or kBtu/Scf (country dependent ä55)

MODBUS register:

Data type:

Access:

2156

Integer

read/write

UNIT HEAT FLOW Description

For selecting the unit required and displayed for the heat flow.

The following time units can be selected:

s = second, m = minute, h = hour, d = day

Options (SI unit)

0 = kW

1 = MW

2…5 = kJ/time unit

6…9 = MJ/time unit

10…13 = GJ/time unit

14…19 = kcal/time unit

18…21 = Mcal/time unit

22…25 = Gcal/time unit

Options (US unit)

26 = tons

27…30 = kBtu/time unit

31…34 = MBtu/time unit

35…38 = GBtu/time unit

Factory setting

kW or kBtu/h (country dependent ä55)

MODBUS register:

Data type:

Access:

2132

Integer

read/write

UNIT PRESSURE Description

Use this function to select the unit for pressure.

The unit you select here is also valid for:

• Process pressure (see PROCESS PRESSURE group, ä35)

• Reference pressure (see REFERENCE PRESSURE group, ä35)

Options

0 = bar a (bar absolute)

1 = psi a (pounds per square inch absolute)

4 = kPa a (Kilopascal absolute)

Factory setting

bar a or psi a (country dependent ä55)

MODBUS register:

Data type:

Access:

2130

Integer

read/write

UNIT TEMPERATURE Description

For selecting the unit required and displayed for the temperature.

Options

0 = °C (CELSIUS)

1 = K (KELVIN)

2 = °F (FAHRENHEIT)

3 = R (RANKINE)

Factory setting

°C or °F (country dependent ä55)

MODBUS register:

Data type:

Access:

2009

Integer

read/write

Function description, SYSTEM UNITS group

SYSTEM UNITS Proline t-mass 65 MODBUS RS485

10 Endress+Hauser

UNIT DENSITY Description

For selecting the unit required and displayed for the calculated gas density at

process conditions. The unit you select here is also valid for:

• Reference density (see REFERENCE DENSITY group, ä36)

Options

SI:

0…1 = g/cm³; g/cc

2…4 = kg/dm³; kg/l; kg/m³

US:

11 = lb/ft³

Factory setting

kg/m³ or lb/ft³ (country dependent ä55)

MODBUS register:

Data type:

Access:

2107

Integer

read/write

UNIT LENGTH Prerequisite

This function is only available for the insertion sensor (t-mass 65I)

Description

For selecting the unit of length required and displayed for the pipe internal

diameter or the inner dimensions of rectangular ducts (see SENSOR DATA

function group ä49).

Options

0 = MILLIMETER

1 = INCH

Factory setting

MILLIMETER or INCH (country dependent ä55)

MODBUS register:

Data type:

Access:

2125

Integer

read/write

Function description, SYSTEM UNITS group

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Proline Promass 80E Handbuch

Endress+Hauser

Endress+Hauser Promag 800 L Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit P CPA472 Bedienungsanleitung

Endress+Hauser

Endress+Hauser IO-Link Liquipoint FTW23 Bedienungsanleitung

Endress+Hauser

Endress+Hauser SpectraSensors OXY5500 Benutzerhandbuch

Endress+Hauser

Endress+Hauser Prosonic S FMU95 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag H 100 EtherNet/IP Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promass E 300 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic M FMU40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promass S 300 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline t-mass 65 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquicap M FMI51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic S FMU95 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 91 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promass 80E Handbuch

Endress+Hauser

Endress+Hauser Nanomass Gas Density Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow P 500 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser RMM621 Technische Daten

Endress+Hauser

Endress+Hauser analytikjena multi N/C pharma HT Bedienungsanleitung

Endress+Hauser

Endress+Hauser Gammapilot M FMG60 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow E 100 HART Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50H Handbuch

Endress+Hauser

Endress+Hauser Proline Promass 300 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Liquistation CSF33 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung