Endress+Hauser IO-Link Liquipoint FTW23 Bedienungsanleitung

Products Solutions Services

Operating Instructions

Liquipoint FTW23

IO-Link

Capacitance point level measurement

BA01792F/00/EN/01.17

71378479

Liquipoint FTW23 IO-Link

2 Endress+Hauser

Order code:

Ext. ord. cd.:

Ser. no.:

www.endress.com/deviceviewer Endress+Hauser

Operations App

XXXXXXXXXXXX

XXXXX-XXXXXX

XXX.XXXX.XX

Serial number

A0023555

Liquipoint FTW23 IO-Link Table of contents

Endress+Hauser 3

Table of contents

1 Document information .............. 4

1.1 Document function ..................... 4

1.2 Symbols .............................. 4

1.3 Documentation ........................ 5

1.4 Registered trademarks ................... 5

2 Basic safety instructions ............ 6

2.1 Requirements for personnel ............... 6

2.2 Designated use ........................ 6

2.3 Operational safety ...................... 6

2.4 Product safety ......................... 6

3 Product description ................. 7

3.1 Product design ......................... 7

4 Incoming acceptance and product

identification ....................... 8

4.1 Incoming acceptance .................... 8

4.2 Product identification .................... 8

4.3 Storage and transport ................... 9

5 Installation ....................... 10

5.1 Installation conditions .................. 10

5.2 Mounting the measuring device ........... 10

5.3 Post-installation check .................. 11

6 Electrical connection .............. 12

6.1 Connecting the measuring device .......... 12

6.2 Post-connection check .................. 13

7 Operation options ................. 14

7.1 Operation with an operating menu ......... 14

8 System integration ................ 15

8.1 Process data ......................... 15

8.2 Reading out and writing device data (ISDU –

Indexed Service Data Unit) ............... 15

8.3 Overview of diagnostic events ............. 17

9 Commissioning .................... 17

9.1 Function check ....................... 18

9.2 Commissioning with an operating menu ..... 18

9.3 Hysteresis function, level detection ......... 18

9.4 Window function, media detection/

differentiation ........................ 19

9.5 Application example ................... 20

9.6 Light signals (LEDs) .................... 21

9.7 Function of LEDs ...................... 21

9.8 Function testing of switch output .......... 22

10 Diagnostics and troubleshooting ... 23

10.1 Troubleshooting ...................... 23

10.2 Diagnostic information via LED display ...... 23

10.3 Diagnostic events ...................... 24

10.4 Behavior of the device in the event of a fault .. 25

10.5 Resetting to factory settings (reset) ........ 25

11 Maintenance ...................... 26

11.1 Cleaning ............................ 26

12 Repairs ........................... 26

12.1 Return .............................. 26

12.2 Disposal ............................ 26

13 Overview of the onsite display

operating menu ................... 27

14 Description of Device Parameters ... 28

14.1 Identification ......................... 28

14.2 Diagnosis ........................... 29

14.3 Parameter ........................... 31

14.4 Observation ......................... 37

15 Accessories ....................... 37

Index .................................. 38

Document information Liquipoint FTW23 IO-Link

4 Endress+Hauser

1 Document information

1.1 Document function

These Operating Instructions contain all the information that is required in various phases

of the life cycle of the device: from product identification, incoming acceptance and

storage, to mounting, connection, operation and commissioning through to

troubleshooting, maintenance and disposal.

1.2 Symbols

1.2.1 Safety symbols

Symbol Meaning

DANGER

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will

result in serious or fatal injury.

WARNING

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in serious or fatal injury.

CAUTION

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in minor or medium injury.

NOTICE

NOTE!

This symbol contains information on procedures and other facts which do not result in

personal injury.

1.2.2 Electrical symbols

Symbol Meaning

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a grounding system.

Protective ground connection

A terminal which must be connected to ground prior to establishing any other connections.

1.2.3 Symbols for certain types of information

Symbol Meaning

Preferred

Procedures, processes or actions that are preferred.

Permitted

Procedures, processes or actions that are permitted.

Forbidden

Procedures, processes or actions that are forbidden.

Tip

Indicates additional information.

Reference to page

,…

1. 2. 3.

Series of steps

Liquipoint FTW23 IO-Link Document information

Endress+Hauser 5

Symbol Meaning

Result of a step

Visual inspection

1.2.4 Symbols for graphics

Symbol Meaning

1, 2, 3 ... Item numbers

A, B, C, ... Views

1.2.5 Symbols for tools

Symbol Meaning

Open-ended wrench

1.3 Documentation

The following document types are also available in the Download Area of the Endress

+Hauser website: www.endress.com → download

Documentation Purpose and content of the document

Technical Information

TI01202F/00/EN

This document contains all the technical data for the device and provides an

overview of the accessories that can be ordered.

Additional documentation

TI00426F/00/EN

SD01622Z/00/YY

BA00361F/00/A6

Weld-in adapter, process adapter and flanges (overview)

Weld-in adapter G 1", G ¾" (installation instructions)

Weld-in adapter M24x1.5 (installation instructions)

1.4 Registered trademarks

is a registered trademark of the IO-Link company group.

Basic safety instructions Liquipoint FTW23 IO-Link

6 Endress+Hauser

2 Basic safety instructions

2.1 Requirements for personnel

Personnel involved in installation, commissioning, diagnostics and maintenance must

meet the following requirements:

• Trained, qualified specialists must have a relevant qualification for this specific function

and task

• Are authorized by the plant owner/operator

• Are familiar with federal/national regulations

• Before starting work, read and understand the instructions in the manual and

supplementary documentation as well as the certificates (depending on the application)

• Follow instructions and comply with basic conditions

Operating personnel must meet the following requirements:

• Be instructed and authorized by the plant operator with regard to the requirements of

the task

• Follow the instructions in this manual

2.2 Designated use

The measuring device described in this manual may be used only as a point level switch for

water-, alcohol- or oil-based liquids or for powdered products. Incorrect use may pose a

hazard. To ensure that the measuring device remains in perfect condition during the

operating time:

• Measuring devices must be used only for media to which the process-wetted materials

have an adequate level of resistance.

• The relevant limit values must not be violated, see TI01202F/00/EN.

2.2.1 Incorrect use

The manufacturer is not liable for damage caused by improper or non-designated use.

Residual risks

Due to heat transfer from the process, the temperature of the electronics housing and the

assemblies contained therein may rise to 80 °C (176 °F) during operation.

Danger of burns from contact with surfaces!

‣For elevated fluid temperature, ensure protection against contact to prevent burns.

2.3 Operational safety

Risk of injury!

‣Operate the device in proper technical condition and fail-safe condition only.

‣The operator is responsible for interference-free operation of the device.

2.4 Product safety

This measuring device is designed in accordance with good engineering practice to meet

state-of-the-art safety requirements, has been tested, and left the factory in a condition in

which it is safe to operate. It meets general safety standards and legal requirements. It also

complies with the EC directives listed in the device-specific EC Declaration of Conformity.

Endress+Hauser confirms this by affixing the CE mark to the device.

Liquipoint FTW23 IO-Link Product description

Endress+Hauser 7

3 Product description

Compact point level switch, preset for water-based liquids; can be adjusted to alcohol- or

oil-based liquids and powdered products; to be used preferably in pipes and in storage,

mixing and process vessels with or without an agitator.

3.1 Product design

A0024689

 1 Product design of Liquipoint FTW23

1 M12 connector

2 Plastic housing cover IP65/67

3 Metal housing cover IP66/68/69

4 Housing

5 Process connection (G ½", G ¾", G 1", M24x1.5)

6 Sensor

Incoming acceptance and product identification Liquipoint FTW23 IO-Link

8 Endress+Hauser

4 Incoming acceptance and product

identification

4.1 Incoming acceptance

A0028673

DELIVERY NOTE

1 = 2

A0016051

Is the order code on the delivery note (1) identical to the order code on the product sticker (2)?

Are the goods undamaged?

A0028673

DELIVERY NOTE

Liquipoint

FTW23-

Ser.No.:

Order code:

Ext. ord. cd.:

FTW23-

TYPE 4X/6P Encl.

IP66/68/69K

CRN: OF1988.5C

TAG:

250003082

BA0xxxxF

MWP:

CUS

Date:

CUS

CUS N12895

A0024330

Do the data on the nameplates correspond to the order specifications on the delivery note?

If one of these conditions is not satisfied, contact your Sales Center.

4.2 Product identification

The following options are available for identification of the measuring device:

• Nameplate data

• Order code with breakdown of the device features on the delivery note

• Enter serial number from nameplates in W@M Device Viewer

(www.endress.com/deviceviewer): All information on the measuring device is displayed

The serial number on the nameplate can also be used to obtain an overview of the

technical documentation supplied with the device in W@MDevice Viewer

(www.endress.com/deviceviewer)

4.2.1 Manufacturer address

Endress+Hauser GmbH+Co. KG

Hauptstraße 1

79689 Maulburg, Germany

Address of the manufacturing plant: See nameplate.

Liquipoint FTW23 IO-Link Incoming acceptance and product identification

Endress+Hauser 9

4.2.2 Nameplate

Ser. no.:

Order code:

I max.

Ext. ord. cd.:

TAG:

BAxxxxF

40 bar

Date:

CUS

14 15

N12895

A0035248

10:

11:

12:

13:

14:

15:

16:

Device name

Manufacturer's address

Order code

Serial number

Marking for test magnet

Extended order code

Supply voltage

Signal output

Process and ambient temperature

Process pressure

Certificate symbols, communication (optional)

Degree of protection: e. g. IP, NEMA

Measuring point identification (optional)

Date of manufacture (year, month)

Data matrix code with E+H serial number

Document number of Operating Instructions

The test magnet is not included in the scope of delivery and can be ordered as an

optional accessory →  37.

4.3 Storage and transport

4.3.1 Storage conditions

• Permitted storage temperature: –40 to +85 °C (–40 to +185 °F)

• Use original packaging.

4.3.2 Transportation to measuring point

Transport the device to the measuring point in the original packaging.

Installation Liquipoint FTW23 IO-Link

10 Endress+Hauser

5 Installation

5.1 Installation conditions

• Installation is possible in any position in a vessel, pipe or tank.

• For measuring points that are difficult to access, use a socket wrench.

The socket wrench 32 AF can be ordered as an optional extra→  37.

A0016844

 2 Installation examples

1 Overfill protection or upper level detection (MAX)

2 Pump dry running protection (MIN)

3 Lower level detection (MIN)

Installation in horizontal pipes:

G3/4

316L

G3/4

316L

G3/4

316L

G3/4

316L

A0021052

Vertical installation:

If the sensor is not completely covered by the medium or if there are air bubbles on

the sensor, this may interfere with the measurement.

5.2 Mounting the measuring device

5.2.1 Required tools

Open-ended wrench or socket wrench 32 AF

– When screwing in, turn by the hex bolt only.

– Torque: 15 to 30 Nm (11 to 22 lbf ft)

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser RIA452 Bedienungsanleitung

Endress+Hauser

Endress+Hauser VU101 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 93 Stücklistenhandbuch

Endress+Hauser

Endress+Hauser Cerabar S PMC71 Technische Daten

Endress+Hauser

Endress+Hauser Proline Promass E 100 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nanomass Gas Density Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow B 200 Bedienungsanleitung

Endress+Hauser

Endress+Hauser COM 381 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic M FMU40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag W 800 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR51 Handbuch

Endress+Hauser

Endress+Hauser Prosonic S FMU90 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promass 80 Anwendungshandbuch

Endress+Hauser

Endress+Hauser Levelflex FMP55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser ISEmax CAS40D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic S FMU95 PROFIBUS DP Bedienungsanleitung

Endress+Hauser

Endress+Hauser Gammapilot M FMG60 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Tank Side Monitor NRF590 Handbuch

Endress+Hauser

Endress+Hauser Micropilot FMR67B Handbuch

Endress+Hauser

Endress+Hauser Cerabar M PMC51? Cerabar M PMP51 Handbuch

Endress+Hauser

Endress+Hauser Micropilot FMR51 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Liquicap M FMI51 Bedienungsanleitung

Endress+Hauser

Endress+Hauser SpectraSensors SS2100 Bedienungsanleitung

Endress+Hauser

Endress+Hauser EngyCal RH33 Technische Daten

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung