Endress+Hauser Micropilot NMR81 Bedienungsanleitung

Products Solutions Services

Description of Device Parameters

Micropilot NMR81

Tank Gauging

GP01068G/00/EN/02.17

71320408

Micropilot NMR81 Table of contents

Endress+Hauser 3

Table of contents

1 About this document ................ 4

1.1 Document function ..................... 4

1.2 Symbols .............................. 4

2 Overview of the operating menu ..... 6

3 The "Expert" menu ................ 25

3.1 "System" submenu ..................... 28

3.2 "Sensor" submenu ...................... 52

3.3 "Input/output" submenu ................. 80

3.4 "Communication" submenu .............. 132

3.5 "Application" submenu ................. 172

3.6 "Tank values" submenu ................. 227

3.7 "Diagnostics" submenu ................. 239

Index ................................. 263

About this document Micropilot NMR81

4 Endress+Hauser

1 About this document

1.1 Document function

The document is part of the Operating Instructions and serves as a reference for

parameters, providing a detailed explanation of each individual parameter of the operating

menu.

1.2 Symbols

1.2.1 Safety symbols

Symbol Meaning

DANGER

DANGER!

This symbol alerts you to a dangerous situation. Failure to avoid this situation will

result in serious or fatal injury.

WARNING

WARNING!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in serious or fatal injury.

CAUTION

CAUTION!

This symbol alerts you to a dangerous situation. Failure to avoid this situation can

result in minor or medium injury.

NOTICE

NOTE!

This symbol contains information on procedures and other facts which do not result in

personal injury.

1.2.2 Electrical symbols

Symbol Meaning

Direct current

Alternating current

Direct current and alternating current

Ground connection

A grounded terminal which, as far as the operator is concerned, is grounded via a

grounding system.

Protective ground connection

A terminal which must be connected to ground prior to establishing any other

connections.

Equipotential connection

A connection that has to be connected to the plant grounding system: This may be a

potential equalization line or a star grounding system depending on national or

company codes of practice.

1.2.3 Tool symbols

Symbol Meaning

A0013442

Torx screwdriver

A0011220

Flat blade screwdriver

Micropilot NMR81 About this document

Endress+Hauser 5

Symbol Meaning

A0011219

Cross-head screwdriver

A0011221

Allen key

A0011222

Hexagon wrench

1.2.4 Symbols for certain types of information

Symbol Meaning

Tip

Indicates additional information.

Reference to documentation

Reference to page

Reference to graphic

Operation via local display

Operation via operating tool

Write-protected parameter

1.2.5 Symbols in graphics

Symbol Meaning

1, 2, 3 ... Item numbers

A, B, C, ... Views

A-A, B-B, C-C, ... Sections

1.2.6 Symbols at the device

Symbol Meaning

Safety instructions

Observe the safety instructions contained in the associated Operating Instructions.

Temperature resistance of the connection cables

Specifies the minimum value of the temperature resistance of the connection cables.

Overview of the operating menu Micropilot NMR81

6 Endress+Hauser

2 Overview of the operating menu

• The following table lists all parameters the "Expert" menu may contain. The page

number refers to where a description of the parameter can be found.

• Depending on the device version and parametrization some parameters will not be

available in a given situation. For details on the conditions refer to the "Prerequisite"

category in the description of the respective parameter.

• The representation essentially corresponds to the menu seen when using an

operating tool (e.g. FieldCare). On the local display there may be minor differences

in the menu structure. Details are mentioned in the description of the respective

submenu.

Navigation  Expert

Expert

Direct access (0106) →  25

Locking status (0004) →  26

Access stat.disp (0091) →  26

Access stat.tool (0005) →  26

Ent. access code (0003) →  26

‣System →  28

‣Display →  29

Language (0104) →  29

Format display (0098) →  30

Value 1 to 4 display (0107–1 to 4) →  30

Decimal places 1 to 4 (0095–1 to 4) →  31

Separator (0101) →  32

Number format (0099) →  32

Header (0097) →  33

Header text (0112) →  33

Display interval (0096) →  33

Display damping (0094) →  34

Micropilot NMR81 Overview of the operating menu

Endress+Hauser 7

Backlight (0111) →  34

Contrast display (0105) →  34

‣System units →  36

Units preset (0605) →  36

Distance unit (0551) →  37

Pressure unit (0564) →  37

Temperature unit (0557) →  37

Density unit (0555) →  38

Decimal length (0573) →  38

Decimal pressure (0608) →  39

Decimal temp. (0614) →  39

Decimal density (0609) →  39

‣Date / time →  43

Date/time (0790) →  44

Set date (0792) →  44

Year (0782) →  45

Month (0787) →  45

Day (0788) →  45

Hour (0789) →  46

Minute (0791) →  46

‣Administration →  49

Def. access code (0093) →  50

Activate SW opt. (0029) →  50

Device reset (0000) →  50

Overview of the operating menu Micropilot NMR81

8 Endress+Hauser

‣Sensor →  52

‣Information →  53

Distance (12401) →  54

Sensor temp. (12499) →  54

Signal quality (12477) →  54

Abs. echo ampl. (12457) →  54

Relat.echo ampl. (12468) →  55

Tank bottom ampl (12467) →  55

Found echoes (12492) →  55

Used calculation (12488) →  55

‣Filter options →  57

Integration time (12489) →  58

Dead time (12521) →  58

‣Sensor diag. →  59

Start self check (12496) →  59

Result selfcheck (12497) →  59

‣Safety sett. →  61

Output echo lost (12523) →  62

Delay echo lost (12456) →  62

‣Mapping →  69

Distance (12401) →  54

Confirm distance (12462) →  71

Present mapping (12487) →  72

Map. end point (12459) →  72

Record map (12448) →  73

Micropilot NMR81 Overview of the operating menu

Endress+Hauser 9

End of mapping (12461) →  73

End map. ampl. (12478) →  74

‣Echo tracking →  76

Evaluation mode (12411) →  77

History reset (12449) →  77

‣Tank bottom eval →  79

Max.TB off dist. (12463) →  79

‣Input/output →  80

‣HART devices →  81

Number devices (13051) →  81

‣HART Device(s) →  82

Device name (14722) →  83

Polling address (14712) →  83

Device tag (14713) →  83

Operating mode (14745) →  83

Comm. status (14710) →  84

#blank#(HART PV - description

dependent on device) (14715)

→  84

#blank#(HART SV - description

dependent on device) (14705)

→  84

#blank#(HART TV - description

dependent on device) (14706)

→  84

#blank#(HART QV - description

dependent on device) (14716)

→  85

HARTDEV PV mA (14708) →  85

HARTDEV PV % (14709) →  85

Output pressure (14719) →  86

Overview of the operating menu Micropilot NMR81

10 Endress+Hauser

Output density (14720) →  86

Output temp. (14721) →  86

Output vapor tmp (14726) →  87

Output level (14718) →  87

‣HART device info →  89

‣Element values →  95

‣Diagnostics →  96

‣NMT dev. config →  98

‣Forget device →  104

Forget device →  104

‣Analog IP →  105

Operating mode (14014) →  106

RTD type (14021) →  106

Ohms offset (14026) →  107

RTD connect type (14022) →  107

Process value (14003) →  108

Process variable (14016) →  108

0 % value (14001) →  108

100 % value (14013) →  109

Input value [%] (14002) →  109

Input value (14015) →  109

Temp. offset (14025) →  110

Min. probe temp (14010) →  110

Max. probe temp (14011) →  110

Probe position (14009) →  111

Andere Handbücher für Micropilot NMR81

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Proservo NMS80 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Proline Promag W 300 PROFINET Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP56 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 10 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP50 Handbuch

Endress+Hauser

Endress+Hauser Micropilot FMR20 Handbuch

Endress+Hauser

Endress+Hauser Micropilot FMR51 Technische Daten

Endress+Hauser

Endress+Hauser SmarTec S CLD 132 PROFIBUS-PA Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Solimotion FTR20 Bedienungsanleitung

Endress+Hauser

Endress+Hauser promag 50 PROFIBUS-PA Technische Daten

Endress+Hauser

Endress+Hauser Micropilot FMR53 Handbuch

Endress+Hauser

Endress+Hauser Levelflex FMP50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar S PMP71 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Cleanfit CPA450 A Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR62 Handbuch

Endress+Hauser

Endress+Hauser StamoLys CA 71 HY Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot FMR60 Handbuch

Endress+Hauser

Endress+Hauser Proline Promag W 400 Handbuch

Endress+Hauser

Endress+Hauser Proline Promag 50D Handbuch

Endress+Hauser

Endress+Hauser Prosonic Flow 90 Bedienungsanleitung

Endress+Hauser

Endress+Hauser nivotester FTC 420 Bedienungsanleitung

Endress+Hauser

Endress+Hauser iTEMP TMT162 Technische Daten

Endress+Hauser

Endress+Hauser Cleanfit W CPA450 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung