Endress+Hauser Cleanfit CPA450 A Series Bedienungsanleitung

Products Solutions Services

Operating Instructions

Cleanfit CPA450

Retractable assembly for 12mm sensors for pH/ORP and

oxygen measurement

BA00183C/07/EN/14.18

71439248

2018-10-31

Cleanfit CPA450 Table of contents

Endress+Hauser 3

Table of contents

1 About this document ................ 4

1.1 Warnings ............................ 4

1.2 Symbols used .......................... 4

1.3 Symbols on the device ................... 4

2 Basic safety instructions ............ 5

2.1 Requirements for the personnel ............ 5

2.2 Designated use ........................ 5

2.3 Occupational safety ..................... 5

2.4 Operational safety ...................... 6

2.5 Product safety ......................... 6

3 Incoming acceptance and product

identification ....................... 7

3.1 Incoming acceptance .................... 7

3.2 Product identification .................... 8

3.3 Scope of delivery ....................... 8

3.4 Certificates and approvals ................ 9

4 Installation ....................... 10

4.1 Mounting conditions ................... 10

4.2 Installation .......................... 13

4.3 Post-installation check .................. 18

5 Operation options ................. 19

5.1 Initial commissioning ................... 19

5.2 Operating elements .................... 19

5.3 Operating the assembly ................. 20

6 Maintenance ...................... 22

6.1 Cleaning the assembly .................. 22

6.2 Cleaning agent ....................... 23

6.3 Replacing seals ....................... 24

7 Repair ............................ 27

7.1 Spare parts .......................... 28

7.2 Return .............................. 31

7.3 Disposal ............................ 31

8 Accessories ....................... 32

8.1 Accessory kits ........................ 32

8.2 Welding socket ....................... 32

8.3 Safety kit ............................ 32

8.4 Sensors ............................. 33

8.5 Connection accessories .................. 34

9 Technical data .................... 36

9.1 Environment ......................... 36

9.2 Process ............................. 36

9.3 Mechanical construction ................ 37

Index .................................. 38

About this document Cleanfit CPA450

4 Endress+Hauser

1 About this document

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious

injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious

injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of

non-compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to

property.

1.2 Symbols used

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

1.3 Symbols on the device

Symbol Meaning

Reference to device documentation

Cleanfit CPA450 Basic safety instructions

Endress+Hauser 5

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance of the measuring system may

be carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the

specified activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions

and must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Designated use

The assembly is designed exclusively for use in liquid media.

The manually operated Cleanfit CPA450 retractable assembly is designed for the

installation of pH, ORP and oxygen sensors in vessels and pipelines.

Thanks to its design, it can be used in pressurized systems →  36.

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Occupational safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

Basic safety instructions Cleanfit CPA450

6 Endress+Hauser

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

2.5 Product safety

2.5.1 State of the art

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

European standards have been observed.

Cleanfit CPA450 Incoming acceptance and product identification

Endress+Hauser 7

3 Incoming acceptance and product

identification

3.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

Incoming acceptance and product identification Cleanfit CPA450

8 Endress+Hauser

3.2 Product identification

3.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Order code

• Serial number

• Permitted pressure

• Permitted temperature

‣Compare the information on the nameplate with the order.

3.2.2 Product identification

Product page

www.endress.com/cpa450

Interpreting the order code

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Go to www.endress.com.

2. Call up the site search (magnifying glass).

3. Enter a valid serial number.

4. Search.

 The product structure is displayed in a popup window.

5. Click on the product image in the popup window.

 A new window (Device Viewer) opens. All of the information relating to your

device is displayed in this window as well as the product documentation.

3.2.3 Manufacturer's address

Endress+Hauser Conducta GmbH+Co. KG

Dieselstraße 24

D-70839 Gerlingen

3.3 Scope of delivery

The scope of delivery comprises:

• Assembly in the version ordered

• PAL mounting kit

• Hook wrench

• Operating Instructions

Cleanfit CPA450 Incoming acceptance and product identification

Endress+Hauser 9

3.4 Certificates and approvals

3.4.1 CE/PED

The assembly has been manufactured according to good engineering practice as per Article

4, Paragraph 3 of the Pressure Equipment Directive 2014/68/EU and is therefore not

required to bear the CE label.

Installation Cleanfit CPA450

10 Endress+Hauser

4 Installation

4.1 Mounting conditions

4.1.1 Dimensions and process connections

Ø 27 (1.06)

135 (5.31)

(1.81)

M23 + 1.5

Ø 21.2 (0.83)

Ø 25 (0.98)

(3.5)

A B

CD E

F, G

A0037726

 1 Dimensions (see the following table). Engineering unit in mm (inch)

F 130 mm (5.12 in) (flange DN32)

G 140 mm (5.51 in) (flange ANSI 1¼")

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Levelflex M FMP40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser SpectraSensors SS2100i-1 Installationsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50D Handbuch

Endress+Hauser

Endress+Hauser Proline t-mass 65 Bedienungsanleitung

Endress+Hauser

Endress+Hauser EngyCal RH33 Technische Daten

Endress+Hauser

Endress+Hauser PROline promag 50 w Handbuch

Endress+Hauser

Endress+Hauser PROMAG 33 Bedienungsanleitung

Endress+Hauser

Endress+Hauser FMU 40 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Hart Cerabar PMP71B Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot M FMR250 Handbuch

Endress+Hauser

Endress+Hauser RID16 Technische Daten

Endress+Hauser

Endress+Hauser Proline Promass O 100HART Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50H Handbuch

Endress+Hauser

Endress+Hauser analytikjena Biometra TOne Bedienungsanleitung

Endress+Hauser

Endress+Hauser FTL62 Series Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow B 200 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prowirl 200 Montageanleitung

Endress+Hauser

Endress+Hauser Proline Promag H 500 Bedienungsanleitung

Endress+Hauser

Endress+Hauser eco-graph Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Analytik Jena multi EA 5000 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Waterpilot FMX21 Technische Daten

Endress+Hauser

Endress+Hauser SmarTec S CLD 132 PROFIBUS-PA Bedienungsanleitung

Endress+Hauser

Endress+Hauser Waterpilot FMX11 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung