Eneo PXB-2080MIR D Bedienungsanleitung

Quick Installation Guide

1/3” Network Camera,

Day&Night,H.264,1920x1080,

3D-DNR, infrared, PoE, ONVIF

PXB-2080MIR D

Safety Precaution

CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To prevent electric shocks and risk of fire hazards, do NOT use other than

specific power source.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Mains power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power mains interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

The symbol is intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

MEGA-PIXEL NETWORK CAMERA

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension

and may differ from actual video of the camera.

Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable

is not subjected to heavy loads, kinks or damage and no moisture can get in.

Never open the device such as boards or lens.

The warranty becomes void if repairs are undertaken by unauthorized persons.

Maintenance and repair have to be carried out only by authorized service centers.

Use only a mild detergent to clean the housing.

The camera should never be operated beyond the technical specifications.

This can lead to destruction.

The camera should never be operated in water.

MEGA-PIXEL NETWORK CAMERA

Contents

Safety Precaution

p.03~04

Contents

p.05

Features

p.06~07

Composition

p.07

Dimensions

p.08

Part Names

p.09

Installation Instructions

p.10~12

Operating Instructions

p.13~29

Specifications

p.30~31

MEGA-PIXEL NETWORK CAMERA

Features

Key Features

MEGA-PIXEL NETWORK CAMERA

• Full HD, 2Mega Pixel, NETWORK CAMERA, 1920x1080(30p/25p)

• ONVIF & PSIA Conformance

• Built-in f=2.8~10mm F1.4 Mega pixel DC Auto Iris Vari-focal lens

• Real time true WDR (Wide Dynamic Range) / 30fps

• Improved noise figure with the enhanced 3DNR

• Dual Filter Switcher

• Color D/N, optimized color mode for night

• Various Zooming Technologies

- Pointing Zoom (which enables the programmable zooming at any area)

- Smart Motion Zoom (Automatic zoom in/out when motion is detected)

- Preset Zoom

- Flex Zoom

• Day & Night Simulation for easy focus adjustment

• Motion Detection, Privacy Mask, D-WDR, Defog, BLC/HLC, Title Set,

Sens-up, D-Zoom(~8x), Smart IR, AGC, Flickerless, H/V/HV Flip, Deblur

• Top performance at low light sensitivity (Sens-up On)

• H.264 / MJPEG dual streaming

• Slot for Standard SD memory card verified up to 32GB

• Two way Audio & Alarm input /output

• Built-in 40pcs IR-LED

• LED ON/OFF control

• Built-in Cooling fan & Heating function

• External Zoom & Focus Adjustment

• Menu Control via either Local Joystick or WEB

• OSD menu & CVBS Video output BNC for easy installation & maintenance

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• PoE(IEEE Std. 802.3af) & Local dual power

• Dual window

• One-touch 3-Axis locking bracket, Easy installation pad

• IP67 protection

General Description

• With ICR mechanism,

- Enhances its sensitivity about 10x at night time

- Can accept the infrared light

• With PoE as well as 24VAC/12VDC dual power design,

- Offers the flexibility of installation

- Ensures the reliability

• With Intelligent Focus Indicator and FOCUS ASSIST menu,

- Offers easy adjustment of sharp focus

- Eliminates the mistake of the erratic focus adjustment

Features

Composition

Torque Wrench:

3mm (1pc) Video Sub-out

Cable (1pc)

Coupler for

RJ45 Cable (1pc)

Assembly Screw:

4 x 14mm (4pcs)

Mounting Screw:

4 x 30mm (4pcs)

Plastic Anchor:

6 x 30mm (4pcs)

Mounting

Template

Easy

Bracket

Operating

Instruction

Network

Camera

EMI Ferrite Core

(1pc)

Wiring Connector

(1pc)

Cable Signal

Sticker

MEGA-PIXEL NETWORK CAMERA

Dimensions

(unit : mm)

267

108

87.30

100

86.40

75.90

190

MEGA-PIXEL NETWORK CAMERA

Part Names

DUAL WINDOW

ETHERNET &

POWER CABLE

SUNSHIELD BOLT

REAR VIEW

SUNSHIELD

FRONT CASE

EASY

BRACKET

OSD Setup

CONTROL COVER

BRACKET

REAR CASE

FOCUS ZOOM

MEGA-PIXEL NETWORK CAMERA

■Adjustment of viewing angle

with a bracket

Torque

wrench

Lock/Unlock

Screw

• Extreme care should be taken NOT to scratch the window in front of lens.

• Care should be taken the cable is NOT to be damaged, kinked or exposed

in the hazardous area.

• Do not expose the camera directly to a strong light source such as the sun or

spot light.

Installation Instructions

Torque Wrench

Assembly Screw

: 4x14mm

Mounting Screw

: 4x30mm

1. Locate the mounting template at the installation position and drill the ceiling or

wall if needed. ( *The easy bracket can not be installed on the ceiling)

2. Place the easy bracket on pre-drilled position and fix it through using mounting

screws(4x30mm). Skip this step when an easy bracket is not installed.

3. Route the Ethernet & Power cable to the connecting place.

Hook up the camera bracket with the easy bracket as illustrated below.

4. Fix the camera bracket through using assembly screws (4x14mm).

5. Set the camera’s viewing angle and adjust zoom/focus of lens by using the torque

wrench.

6. Put the sunshield to the camera unit and tighten the sunshield-bolts.

CAUTION

REAR VIEW

Cable exit

MEGA-PIXEL NETWORK CAMERA

Andere Handbücher für PXB-2080MIR D

Inhaltsverzeichnis

Andere Eneo Sicherheitskamera Handbücher

Eneo

Eneo VKC-1310S Bedienungsanleitung

Eneo

Eneo IPD-52M2713MAA Bedienungsanleitung

Eneo

Eneo IPD-73M2812M0A Bedienungsanleitung

Eneo

Eneo 230799 Bedienungsanleitung

Eneo

Eneo IPB-62M2713MAA Bedienungsanleitung

Eneo

Eneo PXD-2080MIR C Bedienungsanleitung

Eneo

Eneo IPD-42M2713PAA Bedienungsanleitung

Eneo

Eneo VKC-1376/12-24 Bedienungsanleitung

Eneo

Eneo HDD-2080MIR Bedienungsanleitung

Eneo

Eneo ISD-59P0010P0A Bedienungsanleitung

Eneo

Eneo Fastrax IV EDC-4222 Bedienungsanleitung

Eneo

Eneo Fastrax III EDC-3362 Bedienungsanleitung

Eneo

Eneo IED-62F0036M0A Bedienungsanleitung

Eneo

Eneo Fastrax III EDC-3222 Bedienungsanleitung

Eneo

Eneo Almera Bedienungsanleitung

Eneo

Eneo IPP-88A0030MIA Bedienungsanleitung

Eneo

Eneo MPD-64A0003P0A Bedienungsanleitung

Eneo

Eneo Fastrax III Series Bedienungsanleitung

Eneo

Eneo PXD-2080MIR D Bedienungsanleitung

Eneo

Eneo ICB-73M2712MWA Bedienungsanleitung

Eneo

Eneo 230800 Bedienungsanleitung

Eneo

Eneo IEB-63F0037M0A Bedienungsanleitung

Eneo

Eneo VKC-1341A/12-24 Bedienungsanleitung

Eneo

Eneo MPD-62V2713P0A Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung