Eneo VKC-900IR36 Montageanleitung

Full Manual

1/3" Camera, Day&Night, 900TVL,

Infrared, 12VDC

VKC-900IR36

VKC-900IR2812

Notes on safety .................................................................................................2

Overview .............................................................................................................2

Introduction ................................................................................................................................. 2

Functions and Features ............................................................................................................ 2

Hardware Connection ........................................................................................3

Power and Video Cables.......................................................................................................... 3

Function Keys ............................................................................................................................. 3

Device Dimensions ............................................................................................5

Components and Functional Description ........................................................6

Device Installation..............................................................................................7

Function Menus..................................................................................................9

OSD Main Menu......................................................................................................................... 9

Image Setting Menu .................................................................................................................. 9

Advanced Setup Menu ...........................................................................................................10

Technical Speciﬁcations..................................................................................12

Further information .........................................................................................14

Notes on safety

Please also pay attention to the enclosed safety instructions, and carefully read

through this instruction guide before initial operation.

Important points of advice are marked with a caution symbol.

Overview

Introduction

The product is a 900 TVL infrared bullet camera that uses a SONY 1/3“Exmor

CMOS image sensor which can capture high-quality and high-resolution images.

Functions and Features

• High sensitivity: The camera uses a SONY 1/3“Exmor CMOS image sensor

and has an illumination as low as 0.01 Lux. When infrared-ray (IR) LEDs are on,

the illumination can reach 0 Lux.

• On-screen display (OSD) menus: The camera provides OSD menus that sup-

port six languages, facilitating commissioning and setting camera parameters.

• Digital noise reduction (DNR): The camera uses 3D DNR technology that signi-

ﬁcantly optimizes images in low-illumination environments by improving signal to

noise ratio (SNR).

• High resolution: The horizontal resolution is up to 900 TVL, which makes the

image clear and ﬁne.

• Privacy masking: The camera allows you to deﬁne a maximum of 8 quadrilate-

ral mask areas, which meets privacy requirements.

• Built-in mobile optical ﬁlter (optional)

• Intelligent IR technology: The intelligent IR technology enables the camera to

adjust shutter, aperture, and gain depending on image brightness in black and

white mode, optimizing the infrared eﬀect and preventing center overexposure.

• Built-in eﬃcient IR-emitting tubes: With the built-in tubes, the camera can cap-

ture quality images even in total darkness and the nighttime.

Hardware Connection

Power and Video Cables

Figure 2-1 shows the power and video cables.

Power and video cables

Connect the BNC connector of the power or video cable to a video signal cable and

connect the other connector to a low-voltage power cable (12 V DC). After installing

the camera, directly connect the video cable and power cable.

The BNC video output interface is used to emit composite video signals. Monitors

with a resolution of higher than 800 TVL are recommended.

Function Keys

A user can call OSD main menus through multi function switch control keys, and

check and set camera parameters.

Figure 2-2 shows the camera function keys.

OSD menu control key: It is used to enter OSD menus or select menu items when

you press this key in the middle of the multi function switch.

Figure 2-1

Figure 2-2

UP/DOWN keys: The UP and DOWN keys are used to select menu items upwards

and downwards by prodding the multi function switch upwards and downwards.

LEFT/RIGHT keys: The LEFT and RIGHT keys are used to select menu items hori-

zontally or modify parameters by prodding the multi function switch towards the left

or the right.

When you prod the multi function switch upwards and downwards, the menu items

rapidly roll upwards and downwards accordingly; and when you prod the multi func-

tion switch towards the left or the right, the parameter values will rapidly decrease or

increase.

Device Dimensions

Figure 3-1 shows the camera dimensions.

Dimensions (unit: mm)

Figure 3-1

Components and Functional Description

Figure 4-1 shows the components of the camera.

Camera components

Figure 4-1

Device Installation

1. Open a package, take out the camera, and unscrew the camera shell, as

show in Figure 5-1. Unscrew the camera shell

2. Take out the positioning label delivered with the camera and drill three holes

with diameter of 5.5mm on the ceiling or wall based on the marks on the positi-

oning label, nail swell plastic buttons into drilled holes, as shown in Figure 5-2.

Stick the positioning label

3. Connect the multi-connector cable and ﬁx the camera to the ceiling(or wall)

by use of self-tapping screws.

4. Loosen the direction focusing screw, position left-right up/down to adjust

the angle of the camera that the camera faces the monitored area, then ﬁx the

direction focusing screw, as shown in Figure 5-3.

Adjust the camera direction.

Figure 5-1

Figure 5-2

Figure 5-3

5. Adjust view angle and focal length by using an adjusting tool, as shown in

Figure 5-4.

View angle and focal length adjustment

6. Fix the camera shell, as shown in Figure 5-5.

Fix the camera shell

Figure 5-4

Figure 5-5

Function Menus

OSD Main Menu

When you press the multi function switch control key downward, the OSD main

menu MAIN MENU appears, as shown in Figure 6-1. The OSD main menu provides

function options such as LANGUAGE, VIDEO SYSTEM, PICTURE ADJUST, AD-

VANCE SETUP, RESET CAMERA, VERSION NO·, SAVE &EXIT, and EXIT.

OSD main menu

The table describes the function options on the OSD main menu.

Function options on the OSD main menu

Function Option Description

LANGUAGE

Used to select a menu display language. Available language options are

CHINESE, ENGLISH, POLISH, FRANCAIS, ESPAÑOL, and ITALIAN.

VIDEO SYSTEM

Used to select a video system. Available video systems are PAL and

NTSC.

PICTURE ADJUST Used to set the image eﬀect.

ADVANCE SETUP Used to set system parameters for the camera.

RESET CAMERA Used to initialize the setting of the OSD main menu for the camera.

VERSION NO· Used to display the camera version number.

SAVE &EXIT Used to save or exit the OSD main menu.

EXIT Used to return to the ﬁrst page of the OSD main menu.

Image Setting Menu

When you select PICTURE ADJUST on the OSD main menu and press the multi

function switch control key downward, the IMAGE menu appears, as shown in Figu-

re 6-2.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Eneo Sicherheitskamera Handbücher

Eneo

Eneo VKC-146 Bedienungsanleitung

Eneo

Eneo MED-62V2812M0B Bedienungsanleitung

Eneo

Eneo MEB-55M2812M0A Bedienungsanleitung

Eneo

Eneo IPD-72M2713MAA Bedienungsanleitung

Eneo

Eneo MPD-62V2713P0A Bedienungsanleitung

Eneo

Eneo ISM-72F0021W0A Montageanleitung

Eneo

Eneo VKC-1331A Bedienungsanleitung

Eneo

Eneo NXB-980IR3516M Bedienungsanleitung

Eneo

Eneo IND Series Bedienungsanleitung

Eneo

Eneo IPD-68M3611P5A Bedienungsanleitung

Eneo

Eneo IPP-62A0020M0B Bedienungsanleitung

Eneo

Eneo IPC-52A0003M0B Bedienungsanleitung

Eneo

Eneo IPP-88A0030MIA Bedienungsanleitung

Eneo

Eneo VKC-1374-1/IR Bedienungsanleitung

Eneo

Eneo VKC-1416B-/PP Bedienungsanleitung

Eneo

Eneo GXB-1720MIR Bedienungsanleitung

Eneo

Eneo VKCD-13100F2810 Bedienungsanleitung

Eneo

Eneo IED-63M2812P0A Bedienungsanleitung

Eneo

Eneo MPP-72A0020MIA Bedienungsanleitung

Eneo

Eneo ICB-68M3611M0A Bedienungsanleitung

Eneo

Eneo VKC-1353 Bedienungsanleitung

Eneo

Eneo IED-62F0036P0A Bedienungsanleitung

Eneo

Eneo PLD-2036PTZ Bedienungsanleitung

Eneo

Eneo VKCD-12140F2812IR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung