ENS NVB-150 Bedienungsanleitung

NVB -150 User Manual

www.ens-sys.co.kr

Automotive diagnostic Equipment for noise and vibration

Easy Check for Vehicles

NVB-150 User Manual

NVB-150 helps you to find noise and vibration problems quickly and easily with any vehicle.

NVB-150 provides the maintenance standards by measuring vibration.

NVB-150 helps you to control vehicle balance by measuring vibration and rotation of a propeller shaft.

NVB-150 is easy to use for everyone

Table of Contents

6NVB-150 Software 15

6-1 Menu 15

6-2 Display 18

6-3 Vehicle Selection 20

6-4 Measuring Vibration 21

6-5 Measuring Noise 28

6-6 Measuring Balance 35

6-7 Saving Data 47

6-8 Configuration (For measuring) 52

6-9 System Configuration 55

7 Warranty 59

1 General Information 3

2 Safety Precautions 4

3 Product Features 5

4NVB-150 7

4-1 NVB-150 and accessories 9

4-2 Installing Sensor 10

5NVB-150 Operating 11

5-1 System On/ Off 11

5-2 Touch Screen 12

5-3 Operating Function Key 13

NVB -150 User Manual

www.ens-sys.co.kr

Manufacturer ENS System Co., Ltd.

#1001, Anyang K-Center Building, 1591-9, Kwanyang-Dong, Dongan-Gu, Anyang-City,

Gyeonggi-Do, Korea (431-815)

TEL: 82-31-386-7850

FAX: 82-031-386-7854

E-Mail : [email protected]

Web Site : http://www.ens-sys.co.kr

1. General Information

Product Name EnsCheck

Model Name NVB-150

This manual contains instructions for safety, operation, and maintenance.

ENS SYSTEM is not responsible for use in any application other than the measuring purposes.

ENS SYSTEM is not responsible for damages due to improper operation, maintenance, connection to improper voltage supply,

or attempt to repair by anyone other than a facility authorized by ENS SYSTEM.

ENS SYSTEM is not responsible for unauthorized modification, adjustment, and replacement of parts on this product.

Due to unforeseen changes in production procedures, the information contained in this manual is subject to change without notice.

Model

Vehicle parts generate considerable heat . Take all safety precautions at all times.

Use your sensor and cable in a safe manner.

This product was designed for measuring purposes. Do not attempt to use it for any other purpose.

Do not allow the system to come in contact with chemicals. External appearance can be changed.

If this product needs to be inspected or repaired, please call our customer service center.

When the system will not be used for long time, store it in a safe place.

Do not store your system under extreme condition.

Before Using

2. Safety Precautions

NVB -150 User Manual

www.ens-sys.co.kr

Product Specifications

Dimension 200mm(W) X 150mm(H) X 30mm(D)

Weight 512g

Operating System Windows CE 5.0

Voltage Use 220V to 12V (Use Voltage Adapter)

Input Voltage 12V

Power Consumption Less than 800mA

Battery 3.7V, 1750mA

Operating Hours Minimum of 2 hours

Display 4.3inch Color TFT LCD (480 x 272)

Storage Temperature -10 ~ 80℃

Operating Temperature 0 ~ 50℃

Storage Device SD Card

Measuring noise

Measuring vibration

Propeller Shaft Balancing

Product Specification

Input/ Output Port

Accelerometer/Mic 4Channel, BNC Connector, Input Measuring Signal

Photo Sensor 1Channel, 4Pin Din Jack, Input Rotation Speed

USB Slave 1 Port, USB Mini B Type

(S/W Debugging use)

Power DC Jack External Power Input and Charging

Measuring Range

Rotation Speed Range 6000 rpm

Frequency Range Vibration : 20Hz ~ 5000Hz

Noise : 50Hz ~ 12000Hz

Dynamic Range 100dB

3. Product Features

Product Features

NVB -150 User Manual

www.ens-sys.co.kr

4-1. NVB-150 and accessories

Vibration Sensor

(Side Type)

Vibration Sensor

(Top Type)

Sensor Holder ( Magnetic Mount) RPM Sensor(Photo Sensor)

Noise Sensor (MIC)

NVB-150

•Information contained in this manual can be changed without notice.

AC Power Adapter Cigar Jack Cable

Photo Tacho Sensor CableNoise Sensor Cable

SD Card SD Card Reader

USB cable Operation Manual

4. NVB - 150

NVB-150

NVB -150 User Manual

www.ens-sys.co.kr

4-2. Installing Sensor

1) Vibration Sensor

Vibration sensor must be located where you are trying to measure. If not incorrectly installed, guideline will be invalided.

Vibration sensor is designed for use with a magnet. If a magnet does not work where area is not a metal part,

you can use a glue to attach it.

Please refer to the provided images.(Vehicle Locations)

According to environmental condition, sensitivity may change. Sensor must be checked periodically (6~12month).

2) Noise Sensor

Noise sensor must be located where you are trying to measure. If not incorrectly installed, guideline will be

invalided.

Noise sensor is designed for use with a magnetic stand.

Sensor signal can be effected by environmental noise.

According to environmental condition, sensitivity may change. Sensor must be checked periodically(6~12month).

3) Photo Sensor (Rotational speed Sensor)

Install the Photo sensor pointed to the reflective tape. Reflective tape must be located in the P/Shaft.

Photo sensor is designed for use with a magnetic stand.

Place the magnetic stand at the bottom of the Differential gear Housing and locate the sensor perpendicularly

to the reflective tape.

Photo sensor and vibration sensor are coupled together for balancing. When using a Photo sensor only, RPM

can be checked. Use the cable in a safe manner.

NVB - 150

NVB-150

NVB -150 User Manual

www.ens-sys.co.kr

Power Button

Charging LED Indicator

Power LED Indicator Reset button

1. NVB-150 has already installed a battery. Press power button for 3 seconds to turn on your NVB-150. LED will go red and system will start.

2. If your NVB-150 does not start, battery may be discharged then use the AC Power Adapter.

3. When the LED showing orange , NVB-150 is in the charge-mode.

4. If the LED changes to green, battery is fully charged.

5. Press power button for 3 seconds to turn off your NVB-150.

5-2. Touch Screen

Initial Screen Touched Screen

1. NVB-150 is a touch screen based. You can use your touch pen to operate your NVB-150 which included rear side of main body.

2. Touch panel may be damaged if you use sharpened things, such as pencil or pen. Please use a touch pen.

5. NVI-150 Operating

NVI-150 Operating

5-1. System ON/ OFF

NVB -150 User Manual

www.ens-sys.co.kr

ESC Key(Cancel Button)

4 way navigation key

Enter Key(Confirm or Approve Button)

4 way navigation key(up, down, right, left) Basic Movements

Screen <Start Button> <Start Button> : can move (←, →)

Screen <Tab Button> <Tab Button>: can move (←, →)

List Selection <List> : can move (↑, ↓)

Figure, English Letter Figure and letter can be inputted by using the “up, down, right, and left”.

1. Touch panel will allow you to use all functions quickly and easily.

2. <ESC>Key allows you to cancel the current screen and move to main screen. It works as same as the ESC button from

the touch screen.

1. Focusing state can be changed by pressing the 4 way navigation key.

2. <ENTER>Key allows you to operate a function.

3. Movements of 4 way navigation key are shown below.

※Press the “Enter” button to start at “Focusing State”.

Initial Screen “Focusing State” Screen

6. The “Focusing State” shown above may adjust by using the Function key.

7. 4 way navigation key can be operated by using the chart on page 19.

8. 4 way navigation key provides an easy way to operate your NVB-150.

NVI-150 Operating

5-3. Operating Function Key

NVB -150 User Manual

www.ens-sys.co.kr

Main Menu Initial Screen Menu Detailed Menu Function

Main Screen Select Menu Vehicle Selection, Vibration, Noise, Balance, Data, Configuration, System

Vehicle Selection Select Vehicle Model, Engine, Transmission

Vibration

Configuration Screen Location Select Channel

Start Measuring Start Measuring

Progress Screen Measuring Progress Status

Result Screen Result Value

Display Level

Playback

Save Data

Repeated Measurement

Noise

Configuration Screen Location Select Channel

Start Measuring Start Measuring

Progress Screen Measuring Progress Status

Result Screen Result Value

Display Level

Playback

Save Data

Repeated Measurement

Software Menu

Main Menu Initial Screen Menu Detailed Menu Function

Balance

Configuration Screen

Location Select Channel

Start Measuring Start Measuring

DB Vehicle Measuring

Mode

Measuring Progress

Start Measuring(Vibration, Rotation)

Measuring Success

Measuring Failure

Result Value Result(Level, Weight, Angle)

User Measuring Mode

Step 1 ~ 2

Measuring(adding 5g)

Measuring Success

Measuring Failure

Step 3

Result(Level, Weight, Angle)

Measuring(based on result value)

6. NVB-150 Software

6-1. Menu

NVB -150 User Manual

www.ens-sys.co.kr

Main Menu Initial Screen Menu Detailed Menu Function

Data

File Management

File Management Selecting Data Type

Open File Open File

Delete File Deleting File

Open Vibration File Measuring Information Vehicle Information and Channel

Open Result Value Playback

Open Noise File Measuring Information Vehicle Information and Channel

Open Result Value Playback

Open Balance File Measuring Information Vehicle Information and Channel

Open Result Value Result Value and Weight Distribution

Configuration

Setup

Measuring Time 5Sec, 10Sec, 20Sec, 30Sec, Trigger

Desired RPM Setting 3500 RPM

Setting Frequency Vibration and Noise Frequency

Sensor Setting Channel, Gain Setting Gain Value

Cal. Channel Calibration Selecting Channel, Vibration, Noise

Calibration Progress Calibration Level, Sensor Sensitivity

System

Volume Volume Adjusting Volume

LCD(Contrast Adjustment) LCD(Contrast Adjustment) Adjusting Contrast

Date Date MM/DD/YY/HH/MM/SS

System Information(Advanced) System

Information(Advanced) System Version, Updating

Software Menu

6-2-1. Display Area

UI Display

1. NVB-150 Software consists of 4 areas :<Navigation Area>, <Tab Button Area>, <Contents Area> and

<Start Button Area>.

2. <Navigation Area> shows where you are now.

3. <Tab Button Area> helps you to proceed to the next step.

4. <Contents Area> shows status of your information and progress of your results,

<Contents Area> also includes selection and start button.

5. <Start Button> helps you to approve or cancel your process and proceed to the next step.

Navigation Area

Tab Button Area

Start Button Area

3Contents Area

1. Display consists of either 4 areas or 3 areas.

2. Above displays are an example.

6-2. Display

NVB -150 User Manual

www.ens-sys.co.kr

1Main Function Button 4Tab Button 7Information Area 10 Approve/ Cancel Button

2Time Information 5Start Button 8Keypad(digits, English)

3Battery Information 6ESC Button 9Keypad Shift Button

UI Display

< Main Screen> < Function Adjustment Screen> < Keypad screen>

789

1Main function Button allows you to start a function which you selected from the top menu.

2Time Information shows the current time. Time information can effect on your saved data.

You can change the current time by selecting date menu.

3Battery Information shows the battery remaining voltage.

4Tab Button allows you to check each category of information from contents area.

5Start button allows you to proceed to the next step or progress and cancel your process.

Vehicle Selection

Press the Vehicle selection button to select a vehicle from the main screen.

Select a model, engine, and transmission from the vehicle information screen.

After the selection has been set, Press the OK button.

Screen will automatically return to main screen.

Vehicle selection area will display vehicle information.

Now, you can progress vibration, noise, and balance function.

Main Screen

Vehicle Information Screen

Main Screen

Use 4 way navigation key when using a Function Key.

Press the Enter key after using ←, → key.

iIf you can not find a vehicle or a engine that you wanted to choose,

please select “User” and refer to result value.

Key

6-3. Vehicle Selection (Main screen and selecting a vehicle)

6-2-2. Display Component elements

6-3-1. Selecting a vehicle

Inhaltsverzeichnis

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung