Epson Weighing Indicator XK3190-A1+P Bedienungsanleitung

XK3190-A1+P

Weighing Indicator

USER’S GUIDE

Attention:

Please read this User’s Guide carefully when you use

the indicator!

X K 3 1 9 0 - A 1+P

1 . Specifications

2 . Installation

2.1 Front & Back View of Indicator

2.2 Keyboard Function

2.3 Connecting Loadcell to Indicator

3. Calibration

4. Operating Instructions

4.1 Starting and Starting auto zero setting at turning on

4.2 Manual Zero Setting (Semi-automatically setting zero )

4.3 Tare Function

4.4 Connecting Scoreboard to Indicator

4.5 Connecting Pinter to Indicator

4.6 Connecting Serial Communication port to Indicator

4.7 Setting of Time and Date

4.8 Storing, Checking and Deleting of Data

4.9 insufficient voltage indication

5. Maintenance and Announcements

6. Errors and Information

Important Notes!!!

1．Printer interface invalid due to the built-in micro-printer (optional supply upon

special requirement)

2．The function key is used as the paper roll key, it works upon pressing and stops

working upon releasing.

3．“5” should be chosen as printer parameter TypE

4．There is only one print format - linked bill format when micro-printer used.

5．The discount ratio printer option must be off while using:

“odE=0”

“dct=0”

X K 3 1 9 0 - A 1+P

1Specification

1 Model XK3190-A1+

2 Sample rated 5~25 times / sec

3 Load cell sensitivity 1~ 2mv/v

4 Division 1/2/5/10/20/50/100 optional

5 Display 7-bits LED digital display 0.56” in character

height and 7 status indicating.

6 Clock can display day/month/year and

second/minute/hour

7 Scoreboard display interface Using serial output method :

current loop signal, transmission distance ≤50m

RS323 signal, transmission distance ≤30m

8 Communication port RS-232C

Baud rate: 600/1200/2400/4800/9600 optional

9 Printing Port Standard parallel output port, can connect with

Tpup16 micro-printer, TM800,LX-300, KXP－

1121and LQ-1600k wide-line printer.

10 Power Supply AC 187～242V ; 49~50Hz

The built-in repair-proof storage cell; 12V,7AH

11 Operating Temperature and

Relative Humidity

0～40℃, ≤90% RH

12 Storage /transportation

Temperature

－20 ～50℃

13 Fuse 500mA

X K 3 1 9 0 - A 1+P

2. Installation

2.1 Front & Back View of the Indicator

ACCU

PRE-T

FUN

TARE

ENTER

CLEAR

CHECK

DATE

STORE

WEIGH

SET

CALB

TIME

ZERO

UNIT:KG

MONEY PRICE AUTO DATE TIME TARE STABLE

(Graph 2-1) Front View of Indicator

* ACCU - accumulating FUN- function CALB – Calibrating

(25)pins (15)pins (9)pins

Print output port RS-232C; Scoreboard output port Loadcell input port

（Nameplate）

Powersource Fuse

(Graph 2-2) Back View of the Indicator

X K 3 1 9 0 - A 1+P

2.2 Keyboard Function

Key Function

1 [ACCU],[ UNIT

PRICE] No meaning

2 In calibration mode, pressing [PRE-TARE/2] , can input

digital key “2”; In weighing mode, the key is used for

presetting tare.

3 [DELETE/4] In calibration mode, pressing [DELETE/4], can input digital

key “4”; In weighing mode, it is deleting function key , more

details shown in episode “deleting”.

4 [CHECK/5] In calibration mode, pressing [CHECK/5], can input digital

key “5”; In weighing mode, it is checking function key ,

more details shown in episode “checking”.

5 [DATE/6] In calibration mode, pressing [DATE/6] can input digital

key “6” ;In weighing mode, it is date function key , more

details shown in episode “setting of time and date”.

6 [SET PRINT] In calibration mode, pressing [SET PRINT] can input digital

key “7” ;In weighing mode, it is printing setup key , more

details shown in episode “printing function”.

7 [CALB/8] In calibration mode, it is calibration function key ; In other

operation modes it only inputs digital key “8”

8 [TIME/9] In calibration mode, pressing [TIME/9] can input digital key

“9” ;In weighing mode, it is time function key , more details

shown in episode “setting of time and date”.

9 [STORE/0] In calibration mode, pressing [STORE/0] can input digital

key “0” ;In weighing mode, it is storing function key , more

details shown in episode “storing data”.

10 [ACCU/1],[ UNIT

PRICE/3] In calibration mode, pressing [ACCU/1] or [ UNIT

PRICE/3] can input digital key, “1”; “3”;In weighing mode,

there are no meaning.

11 In weighing mode, when stable sign appears, press [TARE] key to clear tare. If

indicator displays zero, the weight value is net weight.

12 In weighing mode, when stable sign appeares, press [ZERO] key to clear limited

weight on the platform. You can set zero range , generally the zero range is 4% of full

scale.

13 In weighing mode, when stable sign appears, press [PRINT] key to print weight data.

14 In calibration mode, press [ENTER] key to confirm that parameters have been inputted

and will enter to next parameter setting automatically. When indicator is in date, time,

printing and communication setting mode, push [ENTER] key to confirm that

parameters have been inputted.

X K 3 1 9 0 - A 1+P

15 In calibration or parameters setting mode, pressing [weigh], it will exit from original

calibration or setting mode and return to weighing mode.

2.3 Connecting Loadcell to Indicator

1. The 9-pin socket is used for the link-up of loadcell, which has been clearly shown

in the graph 2-3.

2. The 4-pin shielded cable is used, +S must be short connected with +E, -S and -E. The

indicator does not have the function of long distance compensation.

3. ▲！Indicator must be reliably connect ed to Loadcell and shielded-cable of

loadcell must be reliably connect ed to underground . If indicator is

powered on, the user should not insert or withdraw the plug in order to

protect the indicator and loadcell.

4. ▲！Sensor and indicator are static sensitive devices; you must adopt anti-static

measures. In order to protect the operator ,indicator, and relevant devices,

you should install lightning rod in the thunderstorm frenquently

happening area.

6789

-E -S Shield

+E +S -IN +IN

5 Shield

8 -IN

9 +IN

1 -E

2 -S

7 +S

6 +E +

Terminal ofIndicator TerminalofSensor

Bridge of Power Supply

Signal Output

(Graph 3-2 ) Connection of the load cell

X K 3 1 9 0 - A 1+P

3. Calibration

According to the Graph 2-3, connecting Indicator and loadcell, and the indicator enters

weighing mode.

1. Connecting calibration jumper to the 15- pin socket on the indicator back panel.

(There is a 15-pin plug in the packing carton with its 14-pin short connected with

15-pin. )

2. According to table 4-3, carry out calibration step by step.

Table 4 - 1

step Operation Display Explanation

1 press [ CALB] after calibration jumper is inserted

press [1 ] [0 ]

press [Enter ]

[E ** ]

[E 10 ] Enter division value selecting

1/2/5/10/20/50/100/200

Example: 10

press [ 0 ]

press [ Enter ]

[ dc * ]

[ dc 0 ] Enter decimal point (0 -4)

Example: without Decimal point 0

press [ 2 ] [ 3 ]

press [ Enter ]

[pon XY ]

[ pon 23 ] Enter Zero range

X: zero set range (1-5) it stands for

2% 4% 10% 20% 100% of F.S

Y: power on Zero set range it

Stands for (1-5)

2% 4% 10% 20% 100% of F.S

example 23

press [ 3 ] [ 0 ]

[ 0 ] [ 9 ] [ 0 ]

[F ***** ]

[ F 30090 ]

Enter overload warning value when

inputting F value,and re-pressing

[ Enter ] key, the calibration will begin.

directly pressing [ Enter ],will enter into

the tenth step. If pressing [ weighting ],

Indicator will return to weighing status.

6 press [ Enter ] Example: 30090

[ noLoAdn] Confirming Zero position. At this time

there is no load on the scale.Pressing

[Input] when the stable light is on.

X K 3 1 9 0 - A 1+P

step Operation Display Explanation

press [ 1 ] [ 5 ]

[ 0 ] [0 ]

press [ Enter ]

[ A LoAd1]

[ d 1500 ] Loading weight ≥5% Max.。

Example: 1500

After stable light is on, press [ Enter ]

key.

9 press [ Enter ] [ noLoAd ] Confirming zero position again.

press [2] [0]

[0][0] [0]

press [ Enter ]

[ ALoAd2 ]

[ 20000 ]

Reloading weight on scale ≥50% Max.

It is better that this loading weight is

near the F.S. Example: 20000

After stable light is on, press [ Enter ]

key.

11 press [ Enter ]

press [ Enter ]

[H xxxxxx ]

[L yyyyy ]

[td zzzz ]

H. L. td indicating three calibrating

coefficients . Recording them for spare

use.

press [ 1 ]

press [ Enter ]

[ Adr ** ]

[ Adr 01 ] communication address (01-26)

Example: 1

press [ 1 ]

press [ Enter ]

[ bt * ]

[ bt 1 ]

Serial communication baud rate ( 0-4).

It respectively represents baud rate: 600,

1200, 2400, 4800, 9600.

Example: 1 (1200)

press [ 0 ]

press [ Enter ]

[ tF * ]

[ tF 0 ]

Serial communication Mode:

0- Continuous transmitting mode,

no receiving.

1- Command response mode,

Example: 0

15 Weighing

mode Calibration End.

Note: At step 6, 7, 8, 9, if press [ Weighing ] key, you can enter next step.

H. L. td indicating three calibrating coefficients .Recording them for spare use.

CAUTION!

When calibration is over, the calibration jumper must be pulled

X K 3 1 9 0 - A 1+P

out.

4. . Operating Instructions

4.1 Power on

1When using AC power , power on , setting the ship- form switch at the back cover

of the indicator on “1” ; If using DC power , setting the ship- form switch at the

back cover of indicator on “1”, then pressing the recover switch, the indicator will

perform “999999 - 000000 ” selfchecking. And then enter weighing mode. Or

after pressing any key, self-checking stops and enters weighing mode

automatically.

2When power on, if loading weight on the plat form of the scale deviates from the

zero point, but still within zero set range, Then indicator will set zero at power on

automatically. If the loading weight is over the zero range, you should adjust zero

point of scale or recalibrate and reset the indicator.

4.2 Manual zero setting:

1In weighing mode, press [ Zero ] key. Indicator will perform zero-setting.

2If displayed value deviates from zero point, but still within zero-range, pressing

[ Zero ] key is available. Otherwise, [ Zero ] key is invalid. (In this status, please

recalibrate or reset zero parameters)

3Only when stability sign lamp is on, you are allowed to set zero operation.

4.3 Tare function

1 NormalTare:

When Indicator at weighing status, and displaying positive weight stably.,press

[ Tare ] key, indicator will deduct the displayed weight value as tare weight..

Then indicator displays net weight as “ 0 ”. And Tare sign Lamp is on.

2 Presettare:

When Indicator at weighing status, press [ Pre Tare ] key, indicator will display

[ P ***** ], Using digital key entering known tare weight value, then press

[ Enter ] key, the pre-tare is finished. At this time indicator displays net weight

and tare sign lamp is lighted.

12345678

9 101112131415

RXD TXD GND

232C

+OUT -OUT(Connecting scoreboard) Calibration control

X K 3 1 9 0 - A 1+P

(Graph 4-1) Serial Communication port and score display port

4.4 Connecting Scoreboard to Indicator

1. The display interface of scoreboard is 15-pin socket, which has been clearly shown

in the Graph 4-1.

2. The scoreboard signal is 20mA continuous current loop, outputting in binary code, the baud

rate is 600.

4.5 Connecting Printer to Indicator

1. The print port adopts parallel output and 25-pin connecting socket, which has been

clearly shown in the Graph 4-3.

12345678910111213

14 15 16 17 18 19 20 21 22 23 24 25

ST D0 D1 D2 D3 D4 D5 D6 D7 BUSY

GND

2. Printing notes:

▲ You must set the printer before you use it.

▲ You must connect the indicator and the printer correctly. The wrong

connection will destroy indicator output interface or printer input interface, and

may even destroy the indicator or printer.

▲ Turning on the printer as following: connecting the line correctly first, turning on

the indicator power, and turning on the printer power finally.

Turning off the printer as following: turning off the printer power first, and then

turning off the indicator power, cutting off the line finally.

Wrong procedure may destroy the indicator or printer.

Inhaltsverzeichnis

Andere Epson Zubehör Handbücher

Epson

Epson LightScene EV-115 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung