Epson 2580 - Perfection PHOTO Bedienungsanleitung

Epson Perfection 2580 Photo

6/04 Epson Perfection 2580 Photo - 1

Scanner Parts Option

The Multi Photo Feeder (part number B12B813372) lets you

load up to 24 photos or business cards and scan them

automatically. See the on-screen Reference Guide for

instructions.

Scanner Specifications

Basic Specifications

Scanner type Flatbed, color

Photoelectric Color CCD line sensor

device

Effective pixels 20,400 × 28,080 pixels at 2400 dpi

Document size 8.5 × 1.7 inches (216 × 297 mm)

Letter size or A4 (reading area can

be specified from software)

Scanning 2400 dpi (main scan)

resolution 4800 dpi with Micro Step (sub scan)

Output 50 dpi to 12800 dpi

resolution (50 to 6400 dpi in 1 dpi increments, and

12800 dpi. 12800 dpi performed with

zoom function.)

Color separation RGB color filters on CCD

Image data 16 bits per pixel per color internal

1, 8, and 16 bits per pixel per color external

Line art settings Adjustable threshold

Gamma correction 1 type for user-defined

Interface USB 2.0 Hi-Speed (Type B connector)

Light source White cold cathode fluorescent lamp

Dimensions Width: 10.8 inches (275 mm)

Depth: 16.5 inches (419 mm)

Height: 3.4 inches (86 mm)

Weight Approx. 7.0 lb (3.2 kg)

USB port

inlet

Option

port

Cover

cable

Document

table

Carriage and

lamp (in the

home position)

Reflective

document mat

Auto film loader cover

Metal film

guide

Eject button

Scanner cover

]Start button{Copy button

|Scan to

E-mail button

4Scan and

Save button

Auto film

loader

Transportation lock

(beneath scanner;

see page 5)

Output tray

Edge guides

Cable

Epson Perfection 2580 Photo

2 - Epson Perfection 2580 Photo 6/04

Electrical

Input voltage AC 100 to 120 V

Ratedfrequency 50to60Hz

Rated current 1.0 A

Power 19.0 W operating (with AFL)

consumption 13.0 W standby mode

5.5 W sleep mode (with AFL)

Environmental

Temperature Operation: 41 to 95 °F (5 to 35 °C)

Storage: –13 to 140 °F (–25 to 60 °C)

Humidity Operation: 10 to 80%

(without Storage: 10 to 85%

condensation)

Operating Ordinary office or home conditions.

conditions Extreme dust should be avoided. Operation

under direct sunlight or near a strong light

source should be avoided.

Safety Approval

EMC FCC Part 15 Subpart B Class B

CSA C108.8 Class B

USB Interface

Interface type Universal Serial Bus Specification

Revision 2.0

Electrical standard Full Speed mode (12 Mbits/s) and

Hi-Speed mode (480 Mbits/s) of Universal

Serial Bus Specification Revision 2.0.

Connector type One receptacle (Type B)

Transparency Unit

Supplied voltage DC 24.0 to 26.4 V

Rated current 0.5 A

35 mm film types Strip: two to six 35 mm frames

Readable width × length:

1.142 × 9.134 inches (29 × 232 mm)

Slide: one 35 mm slide

AC Adapter

Input AC 100 to 120 V, 50 to 60 Hz

Output DC 24.0 to 26.4 V, 1.4 A

Temperature 41 to 95 °F (5 to 35 °C)

Scanning and Restoring Photos

If you have faded photos, slides, or negatives, you can use the

Color Restoration setting in your software to bring them back

to life.

Start EPSON Scan and select Home Mode or Professional

Mode in the Mode box at the top of the screen.

Select your settings and click the Preview button at the bottom

of the screen.

Select the Color Restoration checkbox. (In Home Mode, click

the Image Adjustments button first. In Professional Mode,

scroll to the bottom of the screen.)

For detailed steps, see the on-screen Reference Guide.

Note: You can also use the Color Restoration feature in the EPSON

Smart Panel copy utility. See the on-screen help in the copy utility for

details.

Color Restoration

checkbox

Mode box

Epson Perfection 2580 Photo

6/04 Epson Perfection 2580 Photo - 3

Using EPSON Smart Panel

To open EPSON Smart Panel, press the ]Start button on

your scanner or select EPSON Smart Panel on your desktop.

Note: In Windows, if you see a message when you press the ]Start

button, select EPSON Smart Panel, click Always use this program

for this action, then click OK.

Epson Smart Panel opens on your computer.

For details on using EPSON Smart Panel, click the ?button.

Scanning Film and Slides

The top of the Perfection 2580 Photo scanner cover has an

automatic film loader that lets you load 35 mm negatives

without even opening the cover. You can use the slide holder to

scan a 35 mm slide from the scanner glass.

Tip: Make sure your negatives or slides are dust-

free for the best scan. You can also select the Dust

Removal setting in EPSON Scan to improve your scan.

Before scanning negatives or a slide, lift the scanner cover all the

way up and slide the reflective document mat up and off of the

scanner cover.

Note: Make sure the transparency unit cable is connected to the back

of the scanner.

Scanning 35 mm Negatives

1. Close the scanner cover.

2. Press and release the back of the auto film loader cover to

open it.

Epson Perfection 2580 Photo

4 - Epson Perfection 2580 Photo 6/04

3. Flip out the metal film guide and press it down until it

clicks into place.

Caution: Before loading a film strip, make sure it contains at

least 2 photos, but no more than 6. Don’t load folded, creased,

curled, or sticky film into the auto film loader or it may damage

the film or your scanner.

4. Place the film strip in the film loader with the shiny base

side facing down. Your images and any wording on the film

strip should appear backward on the side that faces up.

5. Slowly slide the film into the loader. Let go of the film when

the scanner begins to automatically feed it into position.

6. To scan each frame in your film strip as a separate image,

press the 4Scan and Save button or open EPSON Smart

Panel and select Scan and Save.This scans each frame

using ideal settings in Full Auto Mode and opens each one

separately in ArcSoft PhotoImpression for viewing, editing,

and printing. See your on-screen Reference Guide and Smart

Panel help for instructions on selecting scan modes and

complete scanning details.

7. When you finish scanning the film strip, press the Eject

button inside the auto film loader to eject the film. Wait for

the ]Start light to stay on green, then remove the film

strip.

Caution: Don’t turn off the scanner with a film strip loaded in the

auto film loader. Never pull film out of the loader by force.

8. Flip the film guide back inside the auto film loader and

press it down until it clicks into place.

9. Close the auto film loader cover.

10. Replace the document mat before you resume scanning

reflective (paper) documents.

Scanning a Slide

1. Make sure you removed the reflective document mat, as

described in the previous column.

2. Place the slide holder on the top of the scanner glass so that

the tab labelled “D” fits into the area labelled “D” on the

document table.

Epson Perfection 2580 Photo

6/04 Epson Perfection 2580 Photo - 5

3. Place a 35 mm slide into the holder with its shiny base side

facing down. Your image should appear backwards on the

side that faces up.

Place the top of the image toward the left side of the

scanner.

4. Close the scanner cover.

5. To scan your slide, press the 4Scan and Save button or

open EPSON Smart Panel and select Scan and Save.This

scans your slide using ideal settings in Full Auto Mode and

opens it in ArcSoft PhotoImpression for viewing, editing,

and printing. See your on-screen Reference Guide and Smart

Panel help for instructions on selecting scan modes and

complete scanning details.

6. When you’re finished scanning, you can store the slide

holder in the scanner cover. Slide the holder into the cover,

then replace the document mat.

Start Light

The scanner’s ]Start light indicates the scanner status.

Transporting the Scanner

Before transporting the scanner for a long distance or storing it

for an extended period of time, you need to lock the scanner’s

carriage to prevent damage.

1. Plug in the scanner, connect it to your computer, and wait

until the carriage moves to the home position (position

nearest the buttons). While the ]Start light is green,

unplug the scanner.

2. If the cover cable is attached, disconnect it.

]Start light Scanner status

Flashing green Warming up or scanning.

Green Ready to scan.

Flashing red Make sure the transportation lock is unlocked.

Try restarting your computer and unplugging the

scanner. Wait 10 seconds, then plug the scanner

back in.

Film may be jammed in the auto film loader.

Disconnect the scanner from the computer, wait

10 seconds, and connect it to the computer again

to see if the film ejects on its own. If film is still

jammed, see your on-screen Reference Guide.

If the red light is still flashing, contact your dealer

or Epson.

Off Make sure your scanner is connected to your

computer and plugged into a power source.

Epson Perfection 2580 Photo

6 - Epson Perfection 2580 Photo 6/04

3. To lock the transportation lock, lift the scanner and slide

the lock to the locked position. This secures the carriage.

Caution: Do not turn the scanner over; this may damage it.

4. Attach the protective materials and repack the scanner in its

original box.

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung