Equinox Systems SpectraPix Batten Bedienungsanleitung

Order code: EQLED055

SpectraPix Batten

User Manual

www.prolight.co.uk SpectraPix Batten User Manual 2

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE-

FULLY BEFORE YOUR INITIAL START-UP!

• Before your initial start-up, please make sure that there is no damage caused during transportation.

• Should there be any damage, consult your dealer and do not use the equipment.

• To maintain the equipment in good working condition and to ensure safe operation, it is necessary

for the user to follow the safety instructions and warning notes written in this manual.

• Please note that damages caused by user modications to this equipment are not subject to warranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and

the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.

Do not endanger your own safety and the safety of others!

Incorrect installation or use can cause serious damage to people and/or property.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Never let the power cable come into contact with other

cables. Handle the power cable and all mains voltage

connections with particular caution!

• Never remove warning or informative labels from the unit.

• Do not open the equipment and do not modify the unit.

• Do not connect this equipment to a dimmer pack.

• Do not switch the equipment on and off in short intervals,

as this will reduce the system’s life.

• Only use the equipment indoors.

• Do not expose to ammable sources, liquids or gases.

• Always disconnect the power from the mains when

equipment is not in use or before cleaning! Only handle

the power-cable by the plug. Never pull out the plug by

pulling the power-cable.

• Make sure that the available mains supply voltage is

between 100~240V AC, 50/60Hz.

• Make sure that the power cable is never crimped or

damaged. Check the equipment and the power cable

periodically.

• If the equipment is dropped or damaged, disconnect the

mains power supply immediately and have a qualied

engineer inspect the equipment before operating again.

• If the equipment has been exposed to drastic

temperature uctuation (e.g. after transportation),

do not connect power or switch it on immediately.

The arising condensation might damage the equipment.

Leave the equipment switched off until it has reached

room temperature.

• If your product fails to function correctly, stop use

immediately. Pack the unit securely (preferably in the

original packing material), and return it to your Pro Light

dealer for service.

• Only use fuses of same type and rating.

• Repairs, servicing and power connection must only be

carried out by a qualied technician. THIS UNIT CONTAINS

NO USER SERVICEABLE PARTS.

• This lighting xture is for professional use only - it is

not designed for or suitable for household use. The

product must be installed by a qualied technician in

accordance with local territory regulations. The safety of

the installation is the responsibility of the installer. The

xture presents risks of severe injury or death due to re

hazards, electric shock and falls.

• Warning! Risk Group 2 LED product according to

EN 62471. Do not view the light output with optical

instruments or any device that may concentrate the beam.

• WARRANTY: One year from date of purchase.

www.prolight.co.uk SpectraPix Batten User Manual 3

Product overview & technical specications

The SpectraPix Batten contains 224 SMD 5050 RGB LEDs divided into 16 segments. They feature a wide 120°

viewing angle and feature a milky, frost effect front screen along with clear front screen to further expand the

versatility of this xture. Onboard features include colour mixing to create soft washes from its rich colour palette,

and chase programs controlled in auto mode or activated by music. A number of chase programs are included and

can be selected by the control panel along with speed and variable strobe.

• 224 tri-colour SMD 5050 LEDs (RGB)

• Viewing angle: 120°

• Refresh rate: 2.1kHz

• DMX channels: 3/3/5/24/48 or 53 selectable

• Static colour, auto, sound active and

master/slave modes plus built-in programs

• 0-100% dimming and variable strobe

• Bracket allows for multiple rigging

or oor standing applications

• 4 push button menu with LED display

• IEC power input/output

• 3-Pin XLR input/output

• Convection cooled

SpectraPix Batten

Specications

Power consumption 50W

Power supply 100~240V, 50/60Hz

Fuse F3A 250V

Dimensions 85 x 1035 x 60mm

Weight 1.5kg

Order code EQLED055

1000mm 60mm

62mm

1035mm

65mm

85mm

www.prolight.co.uk SpectraPix Batten User Manual 4

Technical specications

In the box:

1 x xture with

frosted front screen,

1 x clear front screen,

2 x mounting

brackets/feet and

adjustable knobs,

1 x power cable

& 1 x user manual

www.prolight.co.uk

DMX INPUT DMX OUTPUT POWER OUTPUT:

100-240V~50/60Hz

POWER CONSUMPTION:

50W

POWER INPUT: 100-240V~50/60Hz

FUSE: F3A 250V

MENU ENTERUP DOWN

MIC

SPECTRAPIX

BATTEN

www.prolight.co.uk

DMX INPUT DMX OUTPUT POWER OUTPUT:

100-240V~50/60Hz

POWER CONSUMPTION:

50W

POWER INPUT: 100-240V~50/60Hz

FUSE: F3A 250V

MENU ENTERUP DOWN

MIC

SPECTRAPIX

BATTEN

www.prolight.co.uk

DMX INPUT DMX OUTPUT POWER OUTPUT:

100-240V~50/60Hz

POWER CONSUMPTION:

50W

POWER INPUT: 100-240V~50/60Hz

FUSE: F3A 250V

MENU ENTERUP DOWN

MIC

SPECTRAPIX

BATTEN

www.prolight.co.uk

DMX INPUT DMX OUTPUT POWER OUTPUT:

100-240V~50/60Hz

POWER CONSUMPTION:

50W

POWER INPUT: 100-240V~50/60Hz

FUSE: F3A 250V

MENU ENTERUP DOWN

MIC

SPECTRAPIX

BATTEN

www.prolight.co.uk

DMX INPUT DMX OUTPUT POWER OUTPUT:

100-240V~50/60Hz

POWER CONSUMPTION:

50W

POWER INPUT: 100-240V~50/60Hz

FUSE: F3A 250V

MENU ENTERUP DOWN

MIC

SPECTRAPIX

BATTEN

01 02

030810 05 06 070411 09

01 - Bracket tightening knobs

02 - Bracket

03 - Earth point

04 - LED display

05 - Function buttons

06 - 3-Pin XLR input

07 - 3-Pin XLR output

08 - IEC power input

09 - IEC power output

10 - Fuse F3A 250V

11 - Microphone

www.prolight.co.uk SpectraPix Batten User Manual 5

Operating instructions

StAt

C L 0 1

C L 2 6

Static colour mode

SLav

Slave mode

Auto

Auto mode

CoLo

Colour mix mode

r 0 0 0

g 0 0 0

r 2 5 5

g 2 5 5

b 0 0 0

S t 0

b 2 5 5

S t 9

Shou

Show modes

S h 1

S p 1

S h 5 4

S P 1 0

S t 0 S t 9

Sound mode

S o u d

S o u 1

S o u 2

S o u 3

S E n 1

S E n 9

DMX address/channel mode

A d d r

A 0 0 1

A 5 1 0

3 C H 1

3 C H 2

5 C H

2 4 C H

4 8 C H

5 3 C H

Software version

Info ver V---

10s

20s

30s

60s

o n

d I S

Set

d i r

E - - -

- - - 3

Display backlight setting

Program direction setting

www.prolight.co.uk SpectraPix Batten User Manual 6

Operating instructions

DMX mode:

To access the DMX address mode, press the “MENU” button to show Addr on the LED display.

Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the required DMX address.

Press the “ENTER” button to conrm the setting. Now use the “UP” and “DOWN” buttons to choose one

of the 3/3/5/24/48 or 53 DMX channel modes. Press the “ENTER” button to conrm the setting.

To exit out of any of the above options, press the “MENU” button.

Channel Value Function

000-009 No function

010-013 Static colour (use channel 2

for colour selection)

014-017 Built-in program 1

018-021 Built-in program 2

022-025 Built-in program 3

026-029 Built-in program 4

030-033 Built-in program 5

034-037 Built-in program 6

038-041 Built-in program 7

042-045 Built-in program 8

046-049 Built-in program 9

050-053 Built-in program 10

054-057 Built-in program 11

058-061 Built-in program 12

062-065 Built-in program 13

066-069 Built-in program 14

070-073 Built-in program 15

074-077 Built-in program 16

078-081 Built-in program 17

082-085 Built-in program 18

086-089 Built-in program 19

090-093 Built-in program 20

094-097 Built-in program 21

098-101 Built-in program 22

102-105 Built-in program 23

106-109 Built-in program 24

110-113 Built-in program 25

114-117 Built-in program 26

118-121 Built-in program 27

122-125 Built-in program 28

126-129 Built-in program 29

3 channel mode 1:

Channel Value Function

1 (cont.)

130-133 Built-in program 30

134-137 Built-in program 31

138-141 Built-in program 32

142-145 Built-in program 33

146-149 Built-in program 34

150-153 Built-in program 35

154-157 Built-in program 36

158-161 Built-in program 37

162-165 Built-in program 38

166-169 Built-in program 39

170-173 Built-in program 40

174-177 Built-in program 41

178-181 Built-in program 42

182-185 Built-in program 43

186-189 Built-in program 44

190-193 Built-in program 45

194-197 Built-in program 46

198-201 Built-in program 47

202-205 Built-in program 48

206-209 Built-in program 49

210-213 Built-in program 50

214-217 Built-in program 51

218-221 Built-in program 52

222-225 Built-in program 53

226-229 Built-in program 54

230-233 Auto mode

234-237 Sound mode 1

238-241 Sound mode 2

242-255 Sound mode 3

2 000-255 Static colour selection (see list

on page 9 for static colours)

3 000-255 Program speed (slow-fast)/

sound sensitivity (low-high)

www.prolight.co.uk SpectraPix Batten User Manual 7

Operating instructions

Channel Value Function

1 000-255 Red (0-100%)

2 000-255 Green (0-100%)

3 000-255 Blue (0-100%)

3 channel mode 2:

Channel Value Function

1 000-255 Master dimmer (0-100%)

2000-009 No function

010-255 Strobe (slow-fast)

3 000-255 Red (0-100%)

4 000-255 Green (0-100%)

5 000-255 Blue (0-100%)

5 channel mode:

Channel Value Function

1 000-255 Segment 1 red (0-100%)

2 000-255 Segment 1 green (0-100%)

3 000-255 Segment 1 blue (0-100%)

4 000-255 Segment 2 red (0-100%)

5 000-255 Segment 2 green (0-100%)

6 000-255 Segment 2 blue (0-100%)

7 000-255 Segment 3 red (0-100%)

8 000-255 Segment 3 green (0-100%)

9 000-255 Segment 3 blue (0-100%)

10 000-255 Segment 4 red (0-100%)

11 000-255 Segment 4 green (0-100%)

12 000-255 Segment 4 blue (0-100%)

13 000-255 Segment 5 red (0-100%)

14 000-255 Segment 5 green (0-100%)

15 000-255 Segment 5 blue (0-100%)

16 000-255 Segment 6 red (0-100%)

17 000-255 Segment 6 green (0-100%)

18 000-255 Segment 6 blue (0-100%)

19 000-255 Segment 7 red (0-100%)

20 000-255 Segment 7 green (0-100%)

21 000-255 Segment 7 blue (0-100%)

22 000-255 Segment 8 red (0-100%)

23 000-255 Segment 8 green (0-100%)

24 000-255 Segment 8 blue (0-100%)

24 channel mode:

Channel Value Function

1 000-255 Segment 1 red (0-100%)

2 000-255 Segment 1 green (0-100%)

3 000-255 Segment 1 blue (0-100%)

4 000-255 Segment 2 red (0-100%)

5 000-255 Segment 2 green (0-100%)

6 000-255 Segment 2 blue (0-100%)

7 000-255 Segment 3 red (0-100%)

8 000-255 Segment 3 green (0-100%)

9 000-255 Segment 3 blue (0-100%)

10 000-255 Segment 4 red (0-100%)

11 000-255 Segment 4 green (0-100%)

12 000-255 Segment 4 blue (0-100%)

13 000-255 Segment 5 red (0-100%)

14 000-255 Segment 5 green (0-100%)

15 000-255 Segment 5 blue (0-100%)

16 000-255 Segment 6 red (0-100%)

17 000-255 Segment 6 green (0-100%)

18 000-255 Segment 6 blue (0-100%)

19 000-255 Segment 7 red (0-100%)

20 000-255 Segment 7 green (0-100%)

21 000-255 Segment 7 blue (0-100%)

22 000-255 Segment 8 red (0-100%)

23 000-255 Segment 8 green (0-100%)

24 000-255 Segment 8 blue (0-100%)

25 000-255 Segment 9 red (0-100%)

26 000-255 Segment 9 green (0-100%)

27 000-255 Segment 9 blue (0-100%)

28 000-255 Segment 10 red (0-100%)

29 000-255 Segment 10 green (0-100%)

30 000-255 Segment 10 blue (0-100%)

31 000-255 Segment 11 red (0-100%)

32 000-255 Segment 11 green (0-100%)

33 000-255 Segment 11 blue (0-100%)

34 000-255 Segment 12 red (0-100%)

35 000-255 Segment 12 green (0-100%)

36 000-255 Segment 12 blue (0-100%)

37 000-255 Segment 13 red (0-100%)

38 000-255 Segment 13 green (0-100%)

39 000-255 Segment 13 blue (0-100%)

48 channel mode:

www.prolight.co.uk SpectraPix Batten User Manual 8

Operating instructions

Channel Value Function

40 000-255 Segment 14 red (0-100%)

41 000-255 Segment 14 green (0-100%)

42 000-255 Segment 14 blue (0-100%)

43 000-255 Segment 15 red (0-100%)

44 000-255 Segment 15 green (0-100%)

45 000-255 Segment 15 blue (0-100%)

46 000-255 Segment 16 red (0-100%)

47 000-255 Segment 16 green (0-100%)

48 000-255 Segment 16 blue (0-100%)

48 channel mode (cont.):

Channel Value Function

1 000-255 Master dimmer (0-100%)

2000-009 No function

010-255 Strobe (slow-fast)

3 000-255 Segment 1 red (0-100%)

4 000-255 Segment 1 green (0-100%)

5 000-255 Segment 1 blue (0-100%)

6 000-255 Segment 2 red (0-100%)

7 000-255 Segment 2 green (0-100%)

8 000-255 Segment 2 blue (0-100%)

9 000-255 Segment 3 red (0-100%)

10 000-255 Segment 3 green (0-100%)

11 000-255 Segment 3 blue (0-100%)

12 000-255 Segment 4 red (0-100%)

13 000-255 Segment 4 green (0-100%)

14 000-255 Segment 4 blue (0-100%)

15 000-255 Segment 5 red (0-100%)

16 000-255 Segment 5 green (0-100%)

17 000-255 Segment 5 blue (0-100%)

18 000-255 Segment 6 red (0-100%)

19 000-255 Segment 6 green (0-100%)

20 000-255 Segment 6 blue (0-100%)

21 000-255 Segment 7 red (0-100%)

22 000-255 Segment 7 green (0-100%)

23 000-255 Segment 7 blue (0-100%)

24 000-255 Segment 8 red (0-100%)

25 000-255 Segment 8 green (0-100%)

26 000-255 Segment 8 blue (0-100%)

53 channel mode:

Channel Value Function

27 000-255 Segment 9 red (0-100%)

28 000-255 Segment 9 green (0-100%)

29 000-255 Segment 9 blue (0-100%)

30 000-255 Segment 10 red (0-100%)

31 000-255 Segment 10 green (0-100%)

32 000-255 Segment 10 blue (0-100%)

33 000-255 Segment 11 red (0-100%)

34 000-255 Segment 11 green (0-100%)

35 000-255 Segment 11 blue (0-100%)

36 000-255 Segment 12 red (0-100%)

37 000-255 Segment 12 green (0-100%)

38 000-255 Segment 12 blue (0-100%)

39 000-255 Segment 13 red (0-100%)

40 000-255 Segment 13 green (0-100%)

41 000-255 Segment 13 blue (0-100%)

42 000-255 Segment 14 red (0-100%)

43 000-255 Segment 14 green (0-100%)

44 000-255 Segment 14 blue (0-100%)

45 000-255 Segment 15 red (0-100%)

46 000-255 Segment 15 green (0-100%)

47 000-255 Segment 15 blue (0-100%)

48 000-255 Segment 16 red (0-100%)

49 000-255 Segment 16 green (0-100%)

50 000-255 Segment 16 blue (0-100%)

000-009 No function

010-013 Static colour (use channel 2

for colour selection)

014-017 Built-in program 1

018-021 Built-in program 2

022-025 Built-in program 3

026-029 Built-in program 4

030-033 Built-in program 5

034-037 Built-in program 6

038-041 Built-in program 7

042-045 Built-in program 8

046-049 Built-in program 9

050-053 Built-in program 10

054-057 Built-in program 11

058-061 Built-in program 12

53 channel mode (cont.):

www.prolight.co.uk SpectraPix Batten User Manual 9

Operating instructions

Channel Value Function

51 (cont.)

062-065 Built-in program 13

066-069 Built-in program 14

070-073 Built-in program 15

074-077 Built-in program 16

078-081 Built-in program 17

082-085 Built-in program 18

086-089 Built-in program 19

090-093 Built-in program 20

094-097 Built-in program 21

098-101 Built-in program 22

102-105 Built-in program 23

106-109 Built-in program 24

110-113 Built-in program 25

114-117 Built-in program 26

118-121 Built-in program 27

122-125 Built-in program 28

126-129 Built-in program 29

130-133 Built-in program 30

134-137 Built-in program 31

138-141 Built-in program 32

142-145 Built-in program 33

146-149 Built-in program 34

150-153 Built-in program 35

154-157 Built-in program 36

158-161 Built-in program 37

162-165 Built-in program 38

166-169 Built-in program 39

170-173 Built-in program 40

174-177 Built-in program 41

178-181 Built-in program 42

182-185 Built-in program 43

186-189 Built-in program 44

190-193 Built-in program 45

194-197 Built-in program 46

198-201 Built-in program 47

202-205 Built-in program 48

206-209 Built-in program 49

210-213 Built-in program 50

214-217 Built-in program 51

53 channel mode (cont.):

Channel Value Function

51 (cont.)

214-217 Built-in program 51

218-221 Built-in program 52

222-225 Built-in program 53

226-229 Built-in program 54

230-233 Auto mode

234-237 Sound mode 1

238-241 Sound mode 2

242-255 Sound mode 3

52 000-255 Static colour selection (see list

on page 9 for static colours)

53 000-255 Program speed (slow-fast)/

sound sensitivity (low-high)

Value Colour

000-009 No function

010-019 Red

020-029 Dark Orange

030-039 Orange

040-049 Amber

050-059 Yellow

060-069 Yellow Green

070-079 Lime Green

080-089 Medium Green

090-099 Green

100-109 Vibrant Green

110-119 Mint Green

120-129 Turquoise

Static colours

Value Colour

130-139 Cyan

140-149 Light Blue

150-159 Medium Blue

160-169 Congo Blue

170-179 Blue

180-189 Purple Blue

190-199 Purple

200-209 Violet

210-219 Pink

220-229 Magenta

230-239 Hot Pink

240-249 Fuchsia

250-255 White (RGB)

www.prolight.co.uk SpectraPix Batten User Manual 10

Operating instructions

Auto mode:

To access auto mode, press the “MENU” button to show Auto on the LED display. Now press the

“ENTER” button, the Auto mode will now run. Press the “ENTER” button to conrm the setting.

Show modes (built-in programs):

To access the show modes (built-in programs), press the “MENU” button to show Shou

on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose the

required program Sh 1 ~ Sh54. Press the “ENTER” button and use the “UP” and “DOWN” buttons

to select the speed between SP 1 ~ SP10. Press the “ENTER” button to conrm the setting and use

the “UP” and “DOWN” buttons to select the ash speed between St 0 ~ St 9.

Press the “ENTER” button to conrm the setting.

To exit out of any of the above options, press the “MENU” button.

Sound modes:

To access the sound modes (built-in programs), press the “MENU” button to show Soud

on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose

the required sound mode Sou1 ~ Sou3. Press the “ENTER” button and use the “UP” and “DOWN”

buttons to select the sound sensitivity between SEn1 ~ SEn9.

Press the “ENTER” button to conrm the setting.

To exit out of any of the above options, press the “MENU” button.

Colour mix mode:

To access the static colour mode press “MENU” until CoLo shows on the LED display.

Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select the brightness

between r.000 ~ r.255. Press the “ENTER” button and repeat for green (g) and blue (b).

Value: 000 - 255 (000 = low brightness, 255 = high brightness)

To exit out of any of the above options, press the “MENU” button.

Static colour mode:

To access the static colour mode, press the “MENU” button to show Stat on the LED display.

Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose the required colour

between CL01 ~ CL26. Press the “ENTER” button to conrm the setting.

To exit out of any of the above options, press the “MENU” button.

Value Colour

CL01 Blackout

CL02 Red

CL03 Dark Orange

CL04 Orange

CL05 Amber

CL06 Yellow

CL07 Yellow Green

CL08 Lime Green

Value Colour

CL16 Medium Blue

CL17 Congo Blue

CL18 Blue

CL19 Purple Blue

CL20 Purple

CL21 Violet

CL22 Pink

CL23 Magenta

Value Colour

CL24 Hot Pink

CL25 Fuchsia

CL26 White (RGB)

Value Colour

CL08 Lime Green

CL09 Medium Green

CL10 Green

CL11 Vibrant Green

CL12 Mint Green

CL13 Turquoise

CL14 Cyan

CL15 Light Blue

Inhaltsverzeichnis

Andere Equinox Systems DJ-Equipment Handbücher

Equinox Systems

Equinox Systems MaxiPar Quad Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED054 Bedienungsanleitung

Equinox Systems

Equinox Systems Fusion 50 MKIII Bedienungsanleitung

Equinox Systems

Equinox Systems Pulse Tube Lithium Bedienungsanleitung

Equinox Systems

Equinox Systems Blitzer RGB Strobe Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED019 Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED039A Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED138 Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED127 Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED003 Bedienungsanleitung

Equinox Systems

Equinox Systems FXbar18 Bedienungsanleitung

Equinox Systems

Equinox Systems Beamtastic Bedienungsanleitung

Equinox Systems

Equinox Systems Confetti Burst EQLED400 Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED162 Installations- und Betriebshandbuch

Equinox Systems

Equinox Systems FEVER Bedienungsanleitung

Equinox Systems

Equinox Systems Graphix Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED12B Bedienungsanleitung

Equinox Systems

Equinox Systems Helix Scan XP 150W Scanner Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED136 Bedienungsanleitung

Equinox Systems

Equinox Systems Crossfire XP Bedienungsanleitung

Equinox Systems

Equinox Systems Waterwave 50W Bedienungsanleitung

Equinox Systems

Equinox Systems Helix 100W Gobo Flower Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED53 Bedienungsanleitung

Equinox Systems

Equinox Systems PRO DJ Booth Quad-colour Starcloth Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung