Equinox Systems EQLED12B Bedienungsanleitung

Order code: EQLED12B

DJ Booth

White LED Starcloth

User Manual

www.prolight.co.uk DJ Booth White LED Starcloth User Manual

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageis

between100~250VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Tocleanthecloth,disconnectthemainspowersupplyand

thenwipewithadampcloth.Donotimmerseinliquid.

Theclothwillrequiremonthlycleaning.Donotusealcohol

orsolvents.ConnectionsandLEDsmustbekeptclean

anddryatalltimes.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk DJ Booth White LED Starcloth User Manual

Product overview & technical specications

UpgradeyourEquinoxDJMICRONBoothwiththisblackstarcloth

featuring72x5mmLEDs.TheStarclothissuppliedcompletewith

acomprehensivecontrollerfeaturingAuto,SoundActiveandDMX

controloptions.Additionallyyoucancreateawhitestarclotheffect

whencombiningthewhitelycrasuppliedwiththeEQLED12Land

thisblackstarcloth.

Cloth:

72x5mmwhiteLEDs

Fastxxvelcrotabs

Lowreection,reretardantmaterial

Controller:

DMXchannels:5

Soundactive,autorunandautofademodes

IECpowerinsocket

3-pinXLRDMXin/outsockets

DJ Booth White LED Starcloth

Specications Controller

Powersupply 100~240V,50/60Hz

Fuse T1A250V

Dimensions 55x205x145mm

ESC ENTER UP DOWN

WHITE STARCLOTH

CONTROLLER

www.prolight.co.uk

OUTPUT TO

STARCLOTHDMX INDMX OUTMICFUNCTION

PUSH

OFF

POWER SUPPLY: 100-250V~50/60Hz

FUSE: T1A 250V

ESC ENTER UP DOWN

WHITE STARCLOTH

CONTROLLER

www.prolight.co.uk

OUTPUT TO

STARCLOTHDMX INDMX OUTMICFUNCTION

PUSH

OFF

POWER SUPPLY: 100-250V~50/60Hz

FUSE: T1A 250V

ESC ENTER UP DOWN

WHITE STARCLOTH

CONTROLLER

www.prolight.co.uk

OUTPUT TO

STARCLOTHDMX INDMX OUTMICFUNCTION

PUSH

OFF

POWER SUPPLY: 100-250V~50/60Hz

FUSE: T1A 250V

205mm

145mm

55mm

www.prolight.co.uk DJ Booth White LED Starcloth User Manual

Technical specications

Fitting instructions:

ThisclothisdesignedtobettedtotheEquinoxDJBooth.

Fittheclothfromoneuppercornerrstbyhangingthesewninpocketsontothebooth.

Carefullyunfoldtheclothandattachtheoppositecorner,againbythesewninpocket.

Onceattached,theclothmustbetensionedbytheintegralvelcrostraps.

ESC ENTER UP DOWN

WHITE STARCLOTH

CONTROLLER

www.prolight.co.uk

OUTPUT TO

STARCLOTHDMX INDMX OUTMICFUNCTION

PUSH

OFF

POWER SUPPLY: 100-250V~50/60Hz

FUSE: T1A 250V

01-LEDdisplay

02-Escbutton

03-Enterbutton

04-Upbutton

05-Downbutton

06-Signalindicator

07-Powerindicator

08-Powerinsocket

09-FuseT1A250V

10-Earthpoint

11-On/offswitch

12-Functionknob*

13-Microphone

14-DMXout

15-DMXin

16-Outputtostarcloth

Inthebox:

1 x starcloth,

1 x power cable,

1 x controller &

1 x user manual

ESC ENTER UP DOWN

WHITE STARCLOTH

CONTROLLER

www.prolight.co.uk

OUTPUT TO

STARCLOTHDMX INDMX OUTMICFUNCTION

PUSH

OFF

POWER SUPPLY: 100-250V~50/60Hz

FUSE: T1A 250V

ESC ENTER UP DOWN

WHITE STARCLOTH

CONTROLLER

www.prolight.co.uk

OUTPUT TO

STARCLOTHDMX INDMX OUTMICFUNCTION

PUSH

OFF

POWER SUPPLY: 100-250V~50/60Hz

FUSE: T1A 250V

08 10 11 12 13 14 15 1609

0403

*Rotatetoscrollthroughmenu.Presstoenterorpressandholdtoexit.

www.prolight.co.uk DJ Booth White LED Starcloth User Manual

Operating instructions

Auto mode

Toaccesstheautomode,pressthe“UP/DOWN”buttonsonthefrontoftheunittoshow

“Auto”ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

tosettheautomodeyourequire.Pressthe“ENTER”buttontoconrmthesetting.Nowusethe“UP”and

“DOWN”buttonstosetthethespeedrequired.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“ESC”button.

Fade mode

Toaccessthefademode,pressthe“UP/DOWN”buttonsonthefrontoftheunittoshow

“FAde”ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

tosetthethespeedrequired.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“ESC”button.

Sound active mode

Toaccessthesoundactivemode,pressthe“UP/DOWN”buttonsonthefrontoftheunittoshow

“Soud”ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

tosetthesoundprogramyourequire.Pressthe“ENTER”buttontoconrmthesetting.Nowusethe

“UP”and“DOWN”buttonstosetthethesoundsensitivity(00:lowest,31:highest).

Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“ESC”button.

Pattern mode:

Toaccesspatternmode,pressthe“UP/DOWN”buttonsonthefrontoftheunittoshow

“PAtt”ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

tosetthebrightnessofLEDstring1.Pressthe“ENTER”buttontoconrmthesetting.Repeatthisstepfor

LEDstring2-4.Pressthe“ENTER”buttontoconrmthesetting.Nowusethe“UP”and“DOWN”buttons

tosetthetheashspeedrequired.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“ESC”button.

Slave mode:

Toaccesstheslavemode,pressthe“UP/DOWN”buttonsonthefrontoftheunittoshow

“SLav”ontheLEDdisplay.Theunitisnowinslavemode.Pressthe“ENTER”buttonto

conrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“ESC”button.

DMX address:

TochangetheDMXaddress,pressthe“UP/DOWN”buttonsonthefrontoftheunittoshow

“Addr”ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

tosettheaddressyourequire.Pressthe“ENTER”buttontoconrmthesetting.Thisisalsothe

modethatneedstobeusedwhencontrollingthestarclothviaDMX.

Toexitoutofanyoftheaboveoptions,pressthe“ESC”button.

www.prolight.co.uk DJ Booth White LED Starcloth User Manual

Operating instructions

Software version:

Toviewthesoftwareversionofthecontrollerusethe “UP/DOWN”buttonsonthefrontoftheunitto

show“VEr ”ontheLEDdisplay.Nowpressthe“ENTER”buttonandtheversionwillbedisplayedin

theformat“V---”.

Toexitoutofanyoftheaboveoptions,pressthe“ESC”button.

Static mode:

Toaccessthestaticmode,pressthe“UP/DOWN”buttonsonthefrontoftheunittoshow

“StAt”ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

tosetthestaticmodeyourequirebetween“S000-S015”.



Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“ESC”button.

Channel Value Function

1 0-20 LEDgroup1blackout

21-230 LEDgroup1ashspeed

231-255 LEDgroup1fullon

20-20 LEDgroup2blackout

21-230 LEDgroup2ashspeed

231-255 LEDgroup2fullon

30-20 LEDgroup3blackout

21-230 LEDgroup3ashspeed

231-255 LEDgroup3fullon

4 0-20 LEDgroup4blackout

21-230 LEDgroup4ashspeed

231-255 LEDgroup4fullon

5 0-100 Allchannelsashatspeedsetabove

101-255 Allchannelsfullon

S000 Blackout

S001 LEDgroup1on

S002 LEDgroup2on

S003 LEDgroup3on

S004 LEDgroup4on

S005 LEDgroup1&2on

S006 LEDgroup1&3on

S007 LEDgroup1&4on

5 channel mode:

S008 LEDgroup2&3on

S009 LEDgroup2&4on

S010 LEDgroup3&4on

S011 LEDgroup1,2&3on

S012 LEDgroup1,2&4on

S013 LEDgroup1,3&4on

S014 LEDgroup2,3&4on

S015 AllLEDson

www.prolight.co.uk DJ Booth White LED Starcloth User Manual

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-511.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Note: DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

www.prolight.co.uk DJ Booth White LED Starcloth User Manual

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order code: CABL90, 5-pin - Order code: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterference.Itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

www.prolight.co.uk DJ Booth White LED Starcloth User Manual

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung