Equinox Systems Fusion 150 Bedienungsanleitung

Order code: EQLED005

Fusion 150

12 x 12W Moving Head

User Manual

www.prolight.co.uk Fusion 150 User Manual

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablevoltageisbetween

100~240V,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• WARRANTY:Oneyearfromdateofpurchase.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

www.prolight.co.uk Fusion 150 User Manual

Product overview & technical specications

Housing12x12WquadcolourLEDs,theEquinoxFusion150movingheadwashgivessmoothcolourmixingfrom

richsaturatedhuestosubtlepastelshades.Thecompactandlightweightdesignallowsforeasytransportation

andinstallation.The4pushbuttonLEDmenuallowsforeasyaccesstothefunctionsincludingDMX,auto,sound

activeandmaster/slavemodes.LoadedwithadvancedinternalprogrammingbyEquinoxthesoundactiveand

automodesdeliverstunninglightshows.

•12x12Wquad-colourLEDs

•Beamangle:40°

•Pan:540°,Tilt:180°

•DMXchannels:1,4,7or10selectable

•Auto,soundactive,strobeandmasterslavemodes

•0-100%dimming

•4pushbuttonmenuwithLEDdisplay

•IECin/outsockets

•3-pinXLRin/outsocket

•Fancooled

•Suppliedwithhangingbracket

Fusion 150

Specications Fusion 150

Powerconsumption 180W

Powersupply 100~240V,50/60Hz

Dimensions 288x222x190mm

Weight 3.6kg

Ordercode EQLED005

0m 1m 2m 3m 4m 5m

45° - Lux 850 280 100

45°

40 16

222mm

288mm

190mm

www.prolight.co.uk Fusion 150 User Manual

Technical specications

01-LEDdisplay

02-Menubutton

03-Downbutton

04-Upbutton

05-Enterbutton

06-Poweroutsocket

07-Powerinsocket

08-Fuse5A250V

09-DMXin

10-On/offswitch

11-DMXout

Inthebox:1 x xture,

1 x power cable,

hanging bracket &

1 x user manual

DMX OUTDMX IN

ONOFF

POWER IN/OUT

01 09 100802 04

03 05

MENU DOWN UP ENTER

www.prolight.co.uk Fusion 150 User Manual

Operating instructions

DMX channel selection:

OperatinginDMXcontrolmodegivestheuserthegreatestexibilitywhenitcomestocustomisingor

creatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthextureandeach

xtureindependently.

ToaccesstheDMXchannelmode,pressthe“MODE”buttononthefontoftheunittoshowCHnd

ontheLEDdisplay.Nowpressthe“ENTER”buttonandthechannelmodewillbedisplayed.

Usethe“UP”and“DOWN”buttonstochooseoneofthe1,4,7,or10DMXchannelmodes.Pressthe

“ENTER” buttonagain,thiswillsettheDMXchannel.ThedisplaywillnowdisplayAddr.



Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

1 channel mode:

Channel Value Function

10-7 Blackout

8-127 Autorun(AT01)

128-255 Soundactive(128:lowsensitivity,255:highsensitivity)

www.prolight.co.uk Fusion 150 User Manual

Channel Value Function

10-255 Panadjustment

20-255 Tiltadjustment

30-255 0-100%dimming(0:lowbrightness,255:highbrightness)

40-255 Red(0:lowbrightness,255:highbrightness)

50-255 Green(0:lowbrightness,255:highbrightness)

60-255 Blue(0:lowbrightness,255:highbrightness)

70-255 White(0:lowbrightness,255:highbrightness)

Channel Value Function

10-255 Panadjustment

20-255 Tiltadjustment

30-255 0-100%dimming(0:lowbrightness,255:highbrightness)

40-4 Blackout

5-14 Red

15-24 Green

25-34 Blue

35-44 White

45-54 Cyan

55-64 Yellow

65-74 Orange

75-84 Pink

85-94 Purple

95-104 Pastlegreen(green&white)

105-114 Pastlered(red&white)

115-124 Pastleblue(blue&white)

125-134 Pastlepink(red,blue&white)

135-144 Warmwhite(orange&white)

145-150 Blackout

151-200 Colourfade(151:slowfade,200:fastfade)

201-255 Colourchange(201:slowchange,255:fastchange)

4 channel mode:

7 channel mode:

www.prolight.co.uk Fusion 150 User Manual

Operating instructions

Channel Value Function

10-255 Panadjustment

20-255 Tiltadjustment

30-255 Speed(pan&tilt)

40-255 0-100%dimming(0:lowbrightness,255:highbrightness)

50-255 Red(0:lowbrightness,255:highbrightness)

60-255 Green(0:lowbrightness,255:highbrightness)

70-255 Blue(0:lowbrightness,255:highbrightness)

80-255 White(0:lowbrightness,255:highbrightness)

9 0-4 Blackout

5-14 Red

15-24 Green

25-34 Blue

35-44 White

45-54 Cyan

55-64 Yellow

65-74 Orange

75-84 Pink

85-94 Purple

95-104 Pastlegreen(green&white)

105-144 Pastlered(red&white)

115-124 Pastleblue(blue&white)

125-134 Pastlepink(red,blue&white)

135-144 Warmwhite(orange&white)

145-150 Blackout

151-200 Colourfade(151:slowfade,200:fastfade)

201-255 Colourchange(201:slowchange,255:fastchange)

10 0-127 SoundcontrolviacontrollerisOFF

128-255 SoundcontrolviacontrollerisON

10 channel mode:

Changing the address:

Toaccesstheaddressmenu,pressthe“MODE”buttononthefrontoftheunittoshowAddr

isdisplayed.Pressthe“ENTER”button,theunitshouldnowdisplayA001.Usethe“UP”and“DOWN”

buttonstoselectA001throughA512.Pressthe“ENTER” buttonagain,thiswillsettheaddress.



Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

www.prolight.co.uk Fusion 150 User Manual

Slave mode:

Toaccessslavemodepress“MODE”untilthedisplayshowsSLnd.Pressthe“ENTER”button,theunit

shouldnowdisplaySL 1.Usethe“UP”and“DOWN”buttonstoselecteitherSL 1orSL 2.Press

the“ENTER” buttonagain,thiswillenableyourchosenslavemode.

Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

Adjusting the sound sensitivity:

Toaccessthesoundsensitivitymenupress“MODE”untilthedisplayshowsSoUn.Pressthe“ENTER”

button,theunitshouldnowdisplaythesensitivityinthreedigits.Usethe“UP”and“DOWN”buttonsto

select001through100.Pressthe“ENTER” buttonagain,thiswillsetthesoundsensitivity.

Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

Auto mode:

Toaccessautomodepress“MODE”untilthedisplayshowsAuto.Pressthe“ENTER”button.

Theunitwillnowdisplay At01.Usethe“UP”and“DOWN”buttonstoselecteitherAt01orSou1.

Pressthe“ENTER” buttonagain,thiswillenableyourchosenautomode.

Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Static colour mode (to use the xture as an uplighter):

Toaccessstaticcolourmodepress“MODE”untilthedisplayshowsAuto.Pressthe“ENTER”button

andusethe“UP”and“DOWN”buttonstoselecteitherStat.Pressthe“ENTER” buttonagain,

thiswillenableyoutochoosebetweenCL01-CL15orFade.

WhenusingtheFadefunctionpressthe“ENTER” buttonandusethe“UP”and“DOWN”buttons

toselectthedesiredfadespeedbetweenSP01-SP31.Pressthe“ENTER” buttontoconrm

thesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

Other settings:

Operating instructions

PAn (Xmotorpositive/negativemoveset) YES/NO

tilt (Ymotorpositive/invertmoveset) YES/NO

Led (digitaldisplayON/OFFset) ON/OFF

diSp (digitaldisplayinvert) YES/NO

test (functiontest)

HoUr (totalxtureruntime)

rSEt (reset)

www.prolight.co.uk Fusion 150 User Manual

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-511.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Note: DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

www.prolight.co.uk Fusion 150 User Manual

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterference.Itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Equinox Systems Beleuchtungsausrüstung Handbücher

Equinox Systems

Equinox Systems Axis 50W Gobo Flower Bedienungsanleitung

Equinox Systems

Equinox Systems MaxiPar Tri Bedienungsanleitung

Equinox Systems

Equinox Systems Lexor Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED008 Bedienungsanleitung

Equinox Systems

Equinox Systems Goboceptor Bedienungsanleitung

Equinox Systems

Equinox Systems Fusion Orbit MKII Bedienungsanleitung

Equinox Systems

Equinox Systems MidiPar Tri Plus Bedienungsanleitung

Equinox Systems

Equinox Systems SCORPIO EQLA11 Bedienungsanleitung

Equinox Systems

Equinox Systems COBALT Bedienungsanleitung

Equinox Systems

Equinox Systems Vortex Bedienungsanleitung

Equinox Systems

Equinox Systems CAPRICORN EQLA22 Bedienungsanleitung

Equinox Systems

Equinox Systems Fusion 260ZR Bedienungsanleitung

Equinox Systems

Equinox Systems CARINA Bedienungsanleitung

Equinox Systems

Equinox Systems KAMIKAZE EQLA14 Bedienungsanleitung

Equinox Systems

Equinox Systems SpectraPix Lithium Batten Bedienungsanleitung

Equinox Systems

Equinox Systems CONSTELLA Bedienungsanleitung

Equinox Systems

Equinox Systems FLAM11 Bedienungsanleitung

Equinox Systems

Equinox Systems Comet EQLED29 Bedienungsanleitung

Equinox Systems

Equinox Systems ATRIA Bedienungsanleitung

Equinox Systems

Equinox Systems Nova Par 64 Bedienungsanleitung

Equinox Systems

Equinox Systems Party Par EQLED015 Bedienungsanleitung

Equinox Systems

Equinox Systems Cirrus Bedienungsanleitung

Equinox Systems

Equinox Systems GEMINI Bedienungsanleitung

Equinox Systems

Equinox Systems QUADZILLA Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung