Equinox Systems Fusion Saber Bedienungsanleitung

Order code: EQLED070

Fusion Saber

User Manual

www.prolight.co.uk Fusion Saber User Manual 2

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablevoltageisbetween

110~240V,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• WARRANTY:Oneyearfromdateofpurchase.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

www.prolight.co.uk Fusion Saber User Manual 3

Product overview & technical specications

ThiscompactmovingheadfromEquinoxisloadedwith24WofLEDoutput

power.Eachfaceoftheheadhasa12WCREEquad-colour(RGBW)LED

enginetocreatesuperbbeameffects.Duetoitsuniquetwinfacedesign

thexturecreatescontinuoustumblingeffectswhichlooksuperb

inhazeorfog.

•2x12WCREEquad-colour

LEDs(RGBW)

•Beamangle:3°

•DMXchannels:9or17selectable

•Auto,soundactiveand

master/slavemodes

•Pan:540°,Tilt:360°

continuousrotation

•0-100%dimmingand

variablestrobe

•IECinsocket

•3-pinXLRin/outsockets

•Fancooled

•Suppliedwithhangingbracket

Fusion Saber

Specications

Powerconsumption 30W

Powersupply 110~240V,50/60Hz

Fuse F2A250V

Dimensions 240x170x150mm

Weight 2.58kg

Ordercode EQLED070

240mm

170mm 150mm

0m 1m 2m 3m 4m 5m

3° - Lux

15800

39500

5270

42400

3935

9880

1432

10640

1750

4390

636

4710

3°

985

2470

358

2650

630

1580

229

1700

02 04 05 07 080603

01-LEDdisplay

02-Functionbuttons

03-Microphone

04-DMXinputsocket

05-DMXoutputsocket

06-IECpowerinputsocket

07-FuseF1A250V

08-Fan

Inthebox:1 x xture,

1 x power cable &

1 x user manual

www.prolight.co.uk Fusion Saber User Manual 4

Operating instructionsOperating instructions

d S I Pd I S p

Display invert

A 0 0 1

A 5 1 2

A d d r

DMX address setting

9Ch

1 7 C h

C h N d

Channel modes

N A s t

S L A v

S L N d

Master/slave mode

A u t o

S o u d

S h N d

Show modes

- o n -

- o F F

S o U n

Sound mode on/off

100

S E n S

Sound sensitivity

y E S

n o

b L N d

Blackout mode

y E S

n o

P A n

Pan invert

y E S

n o

t I L t

Tilt invert

y E S

n o

r S E t

Reset factory settings

vEr

Software version

h o U r

Usage time (hours)

t E s t

Test

- o n -

- o F F

LEd

Backlight

N a n u

Manual mode

Pan

P 0

P 2 5 5

t 0

t 2 5 5

t I L t

r 0

r 2 5 5

r E d

G 0

G 2 5 5

G r E E

b 0

b 2 5 5

b L u E

U 0

U 2 5 5

U h I t

d 0

d 2 5 5

d I N N

S 0

S 2 5 5

S t r o

S P 0

S P 9

www.prolight.co.uk Fusion Saber User Manual 5

Operating instructions

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes

tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof

thextureandeachxtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshow

AddrontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”

buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

DMX channel mode:

ToaccesstheDMXchannelmode,pressthe“MENU”buttononthefrontoftheunittoshowChNd

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

oneofthe9or17DMXchannelmodes.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk Fusion Saber User Manual 6

Operating instructions

9 channel mode:

Channel Value Function

CH1 000-255 Pan0-540°

CH2

000-127 Rotation360°

128-191 Continousrotation(fast-slow)

192-255 Reversedcontinousrotation

(slow-fast)

CH3 000-255 Masterdimmer(0-100%)

CH4 000-255 Red(0-100%)

CH5 000-255 Green(0-100%)

CH6 000-255 Blue(0-100%)

CH7 000-255 White(0-100%)

CH8

000-015 Nofunction

016-131 Strobe(slow-fast)

132-139 Nofunction

140-181 Strobe(fastclose,slowopen)

182-189 Nofunction

190-231 Strobe(slowclose,fastopen)

232-239 Nofunction

240-247 Strobe(randomeffects)

248-255 Nofunction

CH9

000-069 Nofunction

070-079 Blackoutduringmovement

080-089 Noblackoutduringmovement

090-199 Nofunction

200-209 Reset

210-249 Nofunction

250-255 Soundmode

17 channel mode:

Channel Value Function

CH1 000-255 Pan0-540°

CH2 000-255 Panne

CH3

000-127 Rotation360°

128-191 Continousrotation(fast-slow)

192-255 Reversedcontinousrotation

(slow-fast)

CH4 000-255 Tiltne

CH5

000-069 Nofunction

070-079 Blackoutduringmovement

080-089 Noblackoutduringmovement

090-199 Nofunction

200-209 Reset

210-249 Nofunction

250-255 Soundmode

CH6 000-255 Masterdimmer(0-100%)

CH7

000-015 Nofunction

016-131 Strobe(slow-fast)

132-139 Nofunction

140-181 Strobe(fastclose,slowopen)

182-189 Nofunction

190-231 Strobe(slowclose,fastopen)

232-239 Nofunction

240-247 Strobe(randomeffects)

248-255 Nofunction

CH8 000-255 RedLED1(0-100%)

CH9 000-255 GreenLED1(0-100%)

CH10 000-255 BlueLED1(0-100%)

CH11 000-255 WhiteLED1(0-100%)

CH12 000-255 RedLED2(0-100%)

CH13 000-255 GreenLED2(0-100%)

CH14 000-255 BlueLED2(0-100%)

CH15 000-255 WhiteLED2(0-100%)

CH16

000-007 Nofunction

008-127 Staticcolour

128-191 Colourchange

192-255 Colourfade

CH17 000-255 CH16speed(slow-fast)

www.prolight.co.uk Fusion Saber User Manual 7

Master/slave mode:

Tosetthemasterunit,pressthe“MENU”buttononthefrontofthemasterunittoshowSLNd onthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseNast.

Pressthe“ENTER”buttontoconrmthesetting.Thenselectyourdesiredprogram(soundactive,DMX

orauto).

Tosettheotherunitsinslavemode,pressthe“MENU”buttononthefrontoftheunittoshowSLNd

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

eitherSLAv.Pressthe“ENTER”buttontoconrmthesetting.Theunitwillnowruninsequencewith

themasterunit.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Show mode:

Toaccesstheshowmodes,pressthe“MENU”buttononthefrontoftheunittoshowShNd

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

betweenSoud(Soundactive)orAuto(Auto).Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Sound/sound sensitivity:

Toturnthesoundmodeonoroff,pressthe“MENU”buttononthefrontoftheunittoshowSoud

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

between-on-or-oFF.Pressthe“ENTER”buttontoconrmthesetting.

Toadjustthesoundsensitivity,pressthe“MENU”buttononthefrontoftheunittoshowSEnsonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetween

0~100.Value: 0 - 100 (0 = low, 100 = high)

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Manual mode:

Toaccessmanualmode,pressthe“MENU”buttononthefrontoftheunittoshowNanuontheLED

display.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetween

Pan(Pan),tILt(Tilt),rEd(Red0-100%),GrEE(Green0-100%),bLuE(Blue0-100%),

UhIt(White0-100%),dINN(Masterdimmer0-100%),orStro(Strobe).Pressthe“ENTER”

buttontoconrmthesettingandusethe“UP”and“DOWN”buttonstochoosebetween0~255.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Pan/Tilt offset:

Toaccessthepan/tiltsubmenu,pressthe“MENU”buttononthefrontoftheunitandthenpressand

holdthe“ENTER”buttonshowPanontheLEDdisplay.Usethe“UP”and“DOWN”buttonstochoose

betweenPan(Pan)andtILt(Tilt).Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”

buttonstoadjustthevaluebetween-127~127.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk Fusion Saber User Manual 8

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Also remember that DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

www.prolight.co.uk Fusion Saber User Manual 9

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterferance.itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

www.prolight.co.uk Fusion Saber User Manual 10

WEEE notice

Correct Disposal of this Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries

with separate collection systems)

Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof

withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe

environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother

typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.

Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir

localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally

saferecycling.

Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe

purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Equinox Systems Beleuchtungsausrüstung Handbücher

Equinox Systems

Equinox Systems Goboceptor Bedienungsanleitung

Equinox Systems

Equinox Systems Axis 50W Gobo Flower Bedienungsanleitung

Equinox Systems

Equinox Systems ORION Bedienungsanleitung

Equinox Systems

Equinox Systems ARIES EQLA20 Bedienungsanleitung

Equinox Systems

Equinox Systems QUADZILLA Bedienungsanleitung

Equinox Systems

Equinox Systems KAMIKAZE EQLA14 Bedienungsanleitung

Equinox Systems

Equinox Systems PEGASUS II Bedienungsanleitung

Equinox Systems

Equinox Systems Comet EQLED29 Bedienungsanleitung

Equinox Systems

Equinox Systems CAPRICORN EQLA22 Bedienungsanleitung

Equinox Systems

Equinox Systems TRINITY BEAM Bedienungsanleitung

Equinox Systems

Equinox Systems MidiPar Tri Plus Bedienungsanleitung

Equinox Systems

Equinox Systems Gigabar MKII COB Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED008 Bedienungsanleitung

Equinox Systems

Equinox Systems NEBULA Bedienungsanleitung

Equinox Systems

Equinox Systems POLARIS Bedienungsanleitung

Equinox Systems

Equinox Systems XP 80W Bedienungsanleitung

Equinox Systems

Equinox Systems SIGMA EQLA09 Bedienungsanleitung

Equinox Systems

Equinox Systems COBALT Bedienungsanleitung

Equinox Systems

Equinox Systems Party Par EQLED015 Bedienungsanleitung

Equinox Systems

Equinox Systems 400W UV Cannon Bedienungsanleitung

Equinox Systems

Equinox Systems ATRIA Bedienungsanleitung

Equinox Systems

Equinox Systems Fusion Orbit MKII Bedienungsanleitung

Equinox Systems

Equinox Systems Lighting strike STRO21 Bedienungsanleitung

Equinox Systems

Equinox Systems Domin8r IIEQLED53 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung