ERBA EC 90 Bedienungsanleitung
Instrument and EC cartridge overview
Touch Screen
Maintenance door:
access to pump,
valves and tubing
Aspiration needle
Proximity sensor
Sample cover:
access to sample
aspiration unit
Front door:
access to
EC cartridge
compartment
Fluidic connector
Biosensor
EC cartridge
connector
EC cartridge
compartment
Lever arm
FOR DETAILED INFORMATION please refer to the EC 90 User Manual www.erbamannheim.com
PAGE 3
QUICK START GUIDE Series
EC 90 ELECTROLYTE
ANALYSER
The purpose of this guide is to provide essential information required for using the EC 90 series.
Nevertheless, operators are instructed to carefully read the user manual before starting operation. All
precautions, safety and operating instructions must be read, understood and followed.
Log in with dummy account
Open maintenance door, remove
foam block & clamp pump tube
Remove tube clips from valves
V1, V2, V3 & V5
Start-up
3
5
2
4
6
FOR DETAILED INFORMATION please refer to the EC 90 User Manual
PAGE 4
Close maintenance door and left side
panel and connect to main power
1
www.erbamannheim.com
Confirm pump tube clamped and
tube clips removed
Remove cap & cap sealing from EC
cartridge and peel o sensor film
Confirm insertion & wait for
startup completion
Open front door and lift lever arm up
Insert new EC cartridge & close
lever and front door
Insert printer paper (optional)
PAGE 5
7
9
11
8
10
12
QUICK START GUIDE Series
EC 90 ELECTROLYTE
ANALYSER
Remove left side panel to access
valve V5
Set system settings
Select/deselect parameters in
main screen & start measurement
Lift sample cover & pass sample
to aspiration needle
Close sample cover & wait until
completion of measurement
Select sample type, volume, measuring
mode & enter further information
Trigger aspiration via proximity
sensor or status button
Test results are automatically
displayed in results menu
Performing measurements Performing on-demand calibration and QC
1
3
5
2
4
6
www.erbamannheim.comFOR DETAILED INFORMATION please refer to the EC 90 User Manual
PAGE 6 www.erbamannheim.com
Initiate smart sensor calibration
directly in main screen
Start measurement in QC
results screen
1P or 2P calibration is performed
according to system requirements
Provide all information
to complete registration
To register a new lot, access QC
material screen and press add button
Select QC level and lot number &
proceed with measurement
PAGE 7
1
3
2
21
4
Option 1
Option 2
QUICK START GUIDE Series
EC 90 ELECTROLYTE
ANALYSER
e.g. EC cartridge e.g. EC cartridge plus iCa
Inhaltsverzeichnis
Andere ERBA Laborausrüstung Handbücher
Beliebte Laborausrüstung Handbücher anderer Marken
Agilent Technologies
Agilent Technologies 5800 ICP-OES Bedienungsanleitung
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Bedienungsanleitung
NI
NI PXI-5422 Handbuch
Collomix
Collomix Aqix Bedienungsanleitung
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung
Ocean Insight
Ocean Insight FLAME-NIR+ Bedienungsanleitung
Parker
Parker ALIGN-MG-NA Bedienungsanleitung
BD
BD 644787 Bedienungsanleitung
DENTAURUM
DENTAURUM Compact Megaplus Bedienungsanleitung
Biuged Laboratory Instruments
Biuged Laboratory Instruments BGD 626 Bedienungsanleitung
VWR
VWR SAS Super IAQ Bedienungsanleitung
illumina
illumina MiSeqDx Bedienungsanleitung