ERMA SSI 1417 Bedienungsanleitung

SSI 1417
PCI-Card for SSI-Encoder
Instruction Manual

Warranty
For delivered products our "Allgemeine Lieferungs- und Zahlungsbedingungen" are effective. In no event
ERMA-Electronicoritssuppliersshallbeliableforanyotherdamageswhatsoever(including,withoutlimi-
tation, damages forloss of business profits, business interruption orother pecuniary loss) arising outof or
inability to use this product.
AllproductsfromERMA-Electronicarewarrantedagainstdefectivematerialandworkmanshipforaperiod
oftwo(2)yearsfrom dateofdelivery.IfitisnecessarytoreturntheproducttoERMA, thesenderisrespon-
sibleforshippingcharges,freight,insuranceandproperpackagingtopreventbreakageintransit.ERMA's
warranty does not apply to defects resulting from action of thebuyer, such mishandling, improper interfa-
cing, operation outside of design limits, improper repair or unauthorized modification.
Trademarks
Turbo Pascal, Delphi are registered trademarks of Borland International, INC.
MS-DOS, Windows, Visual Basic are registered trademarks of Microsoft Corporation.
IBM,PCXT/AT,OS/2areregisteredtrademarksinoftheInternationalBusinessMachinesCorporation.
All other trademarks named or portrayed in the text are registered trademarks of its ownwer and are re-
cognized by ERMA-Electronic.

CONTENTS
1. Safety Instructions .......................4
1.1. Symbol Explanation ....................4
2. General .............................5
3. Function.............................5
4. Block diagram .........................6
5. Hints against noisy environment ...............6
6. Installation ...........................7
6.1. Hardware configuration ..................7
6.1.1. Component layout ...................8
6.1.2. Connection of encoders ................9
6.1.3. Connection of inputs..................10
6.2. Open PC..........................10
6.3. Card insertion .......................11
6.4. Close PC..........................11
6.5. Driver installation .....................11
6.5.1. Windows 95 / 98 / ME .................11
6.5.2. Windows NT4.0 ....................11
6.5.3. Windows 2000 .....................12
6.5.4. Windows XP ......................12
6.6. Configure software.....................12
ERMA-Electronic GmbH 2

6.7. Test of the card ......................12
7. Programming ..........................12
7.1. Programming under Windows ...............12
7.2. Programming with ERMA_SSI-DLL ............13
7.2.1. Functions .......................13
7.3. Usage within own applications ..............18
7.3.1. Visual Basic ......................18
7.3.2. Visual C++/ LabWindowsCVI .............18
7.3.3. Delphi .........................19
7.4. Direct programming ....................19
7.4.1. Registers of SSI 1417 .................20
7.4.2. Tips and Tricks.....................22
8. Troubleshooting ........................22
9. Technical datas.........................23
10. Ordering information......................24
11. Notices .............................25
3ERMA-Electronic GmbH
Stand : 03.2010
ssi1417_man_en.vp
Technical subjects to change

1. Safety Instructions
This instrument is produced in accordance with Class II of IEC 348 and VDE
0411.Whendeliveredtheintrumenthasbeentestedtomeetallfunctionsdescri-
bed. Before installing the instrument please read the mounting and servicing in-
structions.Wehavenoliabilityorresponsibilitytocustomeroranyotherpersonor
entity with respect to any liablity, loss or damage caused or alleged to be caused
directlyorindirectlybyequipmentorsoftwaresoldorfurnishedbyus.Readthein-
stallationinstructioncarefully.Noliabilitywillbeassumedforanydamagecaused
by improper installation.
Inspecttheinstrumentmodulecarton for obvious damage.Beshurethereareno
shipping and handling damages on the module before processing. Do not apply
power to the instrument if it has damaged.
The warranty does not apply to defects resulting from action of buyer, such as
mishandling,improperinterfacing,operationoutsideofdesignlimits,improperre-
pair or unauthorized modifications.
1.1. Symbol Explanation
Caution Attention Instruction Tip
Caution: Will be used at dangerous for life and health !
Attention: Will cause damage.
Instruction: If not noticed, Trouble may occur.
Tip: Useful hints for better operation.
ERMA-Electronic GmbH 4
1. Safety Instructions

2. General
The SSI 1417 is a PCI-card for evaluation of 2 SSI-encoders. Additionally there
are2inputstosettheencoderstozeroand2inputsfortriggereddataaquisition.
The card also contains a timer for time driven data aquisition.
Available options:
•Opto-isolation
3. Function
The SSI 1417 will use one PCI-slot within the pc. Because the PCI-bus supports
plugandplay,therearenojumpersorswitchestochangeconfiguration.Thecard
will use 8 x 32-bit-IO-addresses for the function and 16 x 32-bit-IO-adresses for
thePCI-target-controller.YoucanuseanynumberofSSI1417withinonepc(de-
pends on number of PCI-slots). The standard drivers supports up to 4 cards. If
more than 4 cards should be used, you can ask for a driver for more cards. The
cardhasone9-pinSUB-Dmaleconnectorfortheinputsandtwo 9-pinSUB-Dfe-
male connectors for the encoders.
The functions of the card will be handled in a FPGA. This free pro-
gramable device makes it possible to support customer specific
functions without changing the hardware. It is possible to imple-
ment additional special functions or fast controllers within the
FPGA.
5ERMA-Electronic GmbH
2. General

4. Block diagram
5. Hints against noisy environment
All inputs and outputs are protected against noisy environment and high voltage
spikes.Neverthelessthe locationshouldbeselected toensurethatno capacitive
orinductiveinterferencecanhaveaneffectontheinstrumentorconnectionlines.
It is advisable:
•To use shielded, twisted pair cables.
•The wiring of shields and ground (0V) should be star-shaped.
•The distance to interference sources should be as far as possible. If necessa-
ry, protective screen or metal enclosures must be provided.
•Coils of relays must be supplied with filters.
•Parallel wiring of input signals and AC power lines should be avoided.
ERMA-Electronic GmbH 6
4. Block diagram
FPGA
PCI-Target-
Controller
Input-
and
Output-
Logic
SSI-Interface
SSI-Interface
PCI-Bus
2 Triggerinputs+
2 Zeroinputs
Optional
Isolation

6. Installation
The installation of the card should only be done by qualified personal
only.Before installationallcomponentshavetobedisconnectedfrom
powersupply.BecausewithinPC’sandtheperipheralsarehighvolta-
ges it is dangerous to life!
6.1. Hardware configuration
The SSI 1417 uses plug and play and so there is no need for any settings.
7ERMA-Electronic GmbH
6. Installation

6.1.1. Component layout
ERMA-Electronic GmbH 8
6. Installation
male female female
SV1
SV2
SV3
SSI0
SSI1
Trig/Zero
component layout

6.1.2. Connection of encoders
If external encoder supply is used, don’t connect +Vs!
Configured cable for external encoder suppl KA 1417
9ERMA-Electronic GmbH
6. Installation
UBat
+Vs
0V
NSSIDATA
SSIDATA
+Vs
NSSITAKT
SSITAKT
0V
Encoder
Illustration 1Connection with
onboard encoder supply
UBat
+Vs
0V
NSSIDATA
SSIDATA
+Vs
NSSITAKT
SSITAKT
0V
Encoder
Encoder supply
+-
Illustration 2Connection for
external encoder supply
12
UEncoder -
Encoder +
U
SSI 1417
Encoder
UBat
+Vs
0V
NSSIDATA
SSIDATA
+Vs
NSSICLOCK
SSICLOCK
0V
SUB-D 9-pol.
female
User designation
Illustration 3Pinning of
SSI-female-connector
Inhaltsverzeichnis
Andere ERMA PCI-Karte Handbücher
Beliebte PCI-Karte Handbücher anderer Marken

SIIG
SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies
Moxa Technologies CP-102E Bedienungsanleitung

I-Bus
I-Bus IBC2602 Bedienungsanleitung

Exsys
Exsys EX-60102 Bedienungsanleitung

Chelsio Communications
Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic
Conrad Electronic 97 46 71 Bedienungsanleitung

Pericom
Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology
ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium
Digium TE200 Series Bedienungsanleitung

Allo.com
Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital
Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle
Pyle Gamelink PLINK1 Bedienungsanleitung






