ESI AA780DAT Bedienungsanleitung

INSTALLATION AND USE

AA780DAT

ARTICULATING KEYBOARD ARM

AA780DAT Rev A 4/17

Model AA780DAT

AA780DAT ARTICULATING KEYBOARD ARM

PLEASE REVIEW these instructions before beginning the installation. Check that

all parts needed were provided with your order. Contact your supplier if any

operates to your satisfaction.

PARTS PROVIDED

TRACK MOUN T ING TEMPLA TE

FRONT ED G E OF WO RK SURF A CE

1. Tapethis mountingtemplate to the undersideof wor

k surface.

2. Drilltwo (2) 1/8" diameterx 1/2"deep pilot

holesat markedloc

ations. Be careful not to

drillt h

rough thewor

k surface.

3. Rem

ovetemplateand install two (2) #12x 3/4" woodscrews into

pilotho

les.Leavea gap

ofapproxim

ately1/8" bet

weenth

e head

of ea

ch screwand work surface.

4. Slide trackontoscrew

s, using the keyholesin the tr

ack. Tight

escrew

sandinstall

additional screws as required, minimumof fou

r(4).

Note:If keyboard tray isdeeper than12", mou

ntbaseframeafu

rther1/2" back fromthe front

ge of

work surface.

1/8" PilotHole

Articulating Arm (1) Track (1)

12x3/4" Screws (8)

10x3/8" Screws (2)Front Stop (1)Template (1)

Tape to Underside

of Work Surface

Note: This install

requires a powertool

or cordless drill. This is

not a handtoolinstall.

ADDITIONAL TOOLS REQUIRED

• Drill with 1

/8" bit

• #2 Phillips bit

STEP 1: Use Template to Drill Pilot Holes

• Tape the template to the underside of the work

surface. Align the “front edge” line on the

template with the front edge of the

work surface.

• Drill 1

/8" pilot holes through the

two marked locations on the

template.

— Drill the holes 5/8" deep

CAUTION: Be careful not to drill

through the work surface.

• #3 Phillips bit

AA780DAT ARTICULATING KEYBOARD ARM

STEP 2: Attach Track

• Remove the template and install two 3/4" wood screws into the pilot holes.

— Leave a gap of approximately 1

/8" between the head of each screw and

the work surface

• Slide the track onto the screws, using the keyholes in the track. Tighten the

screws.

• Drill pilot holes for six additional screws spaced evenly along the track.

Fasten the screws to complete the installation of the track.

Slide Small Portion

of Keyhole Under

Screw and Tighten

/8"

AA780DAT ARTICULATING KEYBOARD ARM

STEP 3: Install Articulating Arm

• Slide the articulating arm onto the track.

Position it back far enough so that

you have access to the front two

recessed holes on the track.

STEP 4: Attach Front Stop

• Position the front stop onto the

front of the track and secure it

with the 3/8" machine screws.

Front

Stop

3/8"Machine

Screw

Slide Back

OPERATION

To Raise:

• Grasp both sides of the platform and raise to the desired height.

To Lower:

• Grasp both sides of the platform, tilt up the front, and move down to the

desired height.

To Tilt:

• Turn the handle clockwise to tilt the platform up.

• Turn the handle counterclockwise to tilt the platform down.

AA780DAT ARTICULATING KEYBOARD ARM

800.833.3746 esiergo.com

Inhaltsverzeichnis

Andere ESI Rack & Stand Handbücher

ESI

ESI E-AMT Bedienungsanleitung

ESI

ESI AA330 Bedienungsanleitung

ESI

ESI AA100 Kurzanleitung

ESI

ESI EPPA2-KIT Bedienungsanleitung

ESI

ESI Solution 6CC Kurzanleitung

ESI

ESI Kata EX2-FMS Bedienungsanleitung

ESI

ESI EVOLVE Series Montageanleitung

ESI

ESI Kata Series Bedienungsanleitung

ESI

ESI EVOLVE Series Bedienungsanleitung

ESI

ESI LIFT ERGORISE Bedienungsanleitung

ESI

ESI Kata2-MS Series Bedienungsanleitung

ESI

ESI AA355DS Bedienungsanleitung

ESI

ESI AA750DAT Bedienungs- und Wartungshandbuch

ESI

ESI LTH-EDGE Bedienungsanleitung

ESI

ESI CLIMB2 Bedienungsanleitung

ESI

ESI Kata EX2-MS Series Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung