ETC Irideon WLZ Bedienungsanleitung

Part Number: 7192M1200-1.0.1 Rev: D

Released: 2019-06

Irideon WLZ

User Manual

Version 1.0

To view a list of ETC trademarks and patents, go to

etcconnect.com/ip

All other trademarks, both marked and not marked, are the property of

their respective owners.

ETC intends this document, whether printed or electronic, to be

provided in its entirety.

Table of Contents

Table of Contents i

Introduction . . . . . . . . . . . . . . . . . . . . . . . 1

Specifications. . . . . . . . . . . . . . . . . . . . . . . 3

Basic Assembly. . . . . . . . . . . . . . . . . . . . . . 4

Installation. . . . . . . . . . . . . . . . . . . . . . . . . 4

Install Track-Mounted Fixture. . . . . . . . . . . . . 4

Install Canopy Fixture (DMX variant) . . . . . . . 5

Install the Voltage Barrier

(DMX variant) . . . . . . . . . . . . . . . . . . . . . . . 5

Connect Canopy Wiring (DMX variant) . . . 6

Install the Mounting Plate and

Complete the Wiring (DMX variant) . . . . . 8

Install Canopy Fixture (0–10 V and DALI

variants) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Install Portable Fixture with C-clamp . . . . . . 13

Install Portable Fixture on Unistrut Track . . 14

Connect Cables to Portable Fixture . . . . . . . 14

Portable Fixture DMX Pinout . . . . . . . . . . 15

Set the DMX Address on the Fixture . . . . . . 15

Alternative DMX Addressing Functions . . 17

Adjust the Local Intensity . . . . . . . . . . . . . 17

Initial Power Up . . . . . . . . . . . . . . . . . . . . . . . 18

Status LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ii Table of Contents

Adjustments. . . . . . . . . . . . . . . . . . . . . . . 19

Set the Angle with the Yoke . . . . . . . . . . . . . 19

Adjust the Field . . . . . . . . . . . . . . . . . . . . . . . 19

Use the Barn Door Accessory . . . . . . . . . . . . . 20

Use the Integrated Media Holder . . . . . . . . . 20

Install Color Media or Diffusion . . . . . . . . 21

Install Dichroic Glass. . . . . . . . . . . . . . . . . . 21

Clean the Lens . . . . . . . . . . . . . . . . . . . . . 22

RDM Values . . . . . . . . . . . . . . . . . . . . . . . 23

User Manual 1

Introduction

The Irideon WLZ (Wash Light Zoom) is a compact but powerful LED wash light.

It incorporates many of the great features of its companion fixture, the

Irideon FPZ, including local and DMX control, adjustable zoom, and sleek

design.

The Irideon WLZ has three available mounting options:

• Track-mount—For use with the DataTrack track system.

• Portable—Includes a miniature C-clamp and yoke-mounted driver, and

has a permanently installed power cord with 3-prong Edison connector.

Region-specific connectors are available. Contact ETC for available

options. Use L5-15 plugs on branch circuits with L5-15 receptacles only.

• Canopy—Available in three different control variants:

-0–10V

- DALI

-DMX

Note:

The miniature C-clamp for the portable fixture is

available only in non-EU markets. Within the EU, use an

M12 bolt to secure a C-clamp (provided separately) to the

fixture.

PortableTrack-mount

Canopy

2Irideon WLZ

WARNING:

Please note the following safety warnings before use:

• Do not mount the fixture on or near combustible

surfaces.

• Do not operate the fixture without a lens installed, or

with a scratch or cracked lens. Damaged lenses must be

replaced.

• Use in dry locations only, where humidity does not

exceed 90 percent (non-condensing). These fixtures are

not intended for outdoor use.

WARNING:

For the canopy fixture, turn off power at main fuse or

breaker box and verify that the power is off before

proceeding with installation or maintenance.

The canopy fixture must be installed by a qualified

electrician in accordance with all national and local

electrical and construction codes and regulations.

WARNING:

Use the track-mount fixture with ceiling-mounted track

only.

WARNING:

To reduce the risk of fire and electric shock, use the

track-mount fixture only with the DataTrack (EUTRAC

)

track system.

AVERTIR:

Pour éviter le risque d'incendie ou de choc électrique

avec le modèle adaptateur pour rail, utiliser uniquement

avec une alimentation par rail DataTrack (EUTRAC).

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO

PERSONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING - To reduce the risk of FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:

1) Keep lamp away from materials that may burn.

2) External temperature after 5 minutes of full-brightness operation: 27°C (81°F).

3) External temperature when steady state is achieved: 50°C (122°F).

SAVE THESE INSTRUCTIONS

User Manual 3

Specifications

Physical

• Steel yoke with 0.406” (10.3 mm) diameter

mounting hole

• IP20 rated

• Magnetically held integrated media holder

for 2-11/16” (69 mm) diameter color media

or diffusion or 1.75 mm-thickness dichroic

glass

• Track-mount fixture:

- Compatible and ETL-listed for DataTrack

(EUTRAC) brand track

- DataTrack color matching track adapter

included

• Portable fixture:

- C-clamp (included in non-EU markets)

- Optional accessory for Unistrut®

mounting (order separately, part number

7191K1000)

• Canopy fixture:

- Can be installed directly on 4” and

4-11/16” backboxes, or on backboxes

with round cover plates

- Not for installation on 1-gang backboxes

or trim rings

Electrical

• Power at full intensity: 20 W (typical),

24 W (maximum)

• Input voltage options:

- Track-mount and portable: 100–240 V,

50/60 Hz

- Canopy (0–10 V and DALI): 120–277 V,

50/60 Hz

- Canopy (DMX): 100–277 V, 50/60 Hz

• Portable fixture: 6 ft power cable hard-wired

to fixture with mains connector options of

NEMA 5-15P, Schuko, or UK

• Inrush (first half-cycle) for 0–10 V and DALI

canopy fixtures:

- 120 V: 2 A

- 240 V: 5 A

- 277 V: 6 A

• Inrush (first half-cycle) for all other fixtures:

- 120 V: 11 A

- 240 V: 24 A

- 277 V: 28 A

• All variants require power from a non-

dimmable source

LEDs

• Cree LED source

- Irideon WLZ 2700 K Gallery: 90+ CRI

- Irideon WLZ 3000 K: 80+ CRI

- Irideon WLZ 3000 K Gallery: 90+ CRI

- Irideon WLZ 4000 K: 80+ CRI

- Irideon WLZ 5000 K: 80+ CRI

• Long-life LED: 70,000 hours L70 lumen

maintenance

Optical

• Integrated beam control

(9–78 degree beam-angle)

• Built-in zoom optics

(16–91 degree field-angle)

Thermal

• 0°C to 40°C (32°F to 104°F) ambient operating temperature

Accessories

• Round diffuser for use in integrated media holder (order part number 7192A4025)

4Irideon WLZ

Basic Assembly

Installation

Install Track-

Mounted Fixture

1: Insert the DataTrack

adapter into the track.

The adapter only fits into

the track one way with

the tabs nesting into the

track’s groove.

2: Rotate the locking

mechanisms to lock the

adapter into place.

3: Use the circuit selection

lock to select the circuit.

The desired circuit number should point toward the center of the

adapter.

WARNING:

When using the circuit selection lock, ensure that the

selected circuit is a constant power circuit. Dialing into a

dimmable circuit may cause fixture damage that will void

the ETC warranty.

Yoke

Integrated media

holder

(Illustration shows fixture body only)

Wide/narrow

field

adjustment

Circuit

selection lock

Locking

mechanism

User Manual 5

Install Canopy Fixture (DMX variant)

Install the Voltage Barrier (DMX variant)

The DMX variant of the canopy fixture includes a voltage barrier to separate

the data network from the line voltage inside the backbox. Voltage barriers are

provided for both 4” and 4-11/16” backboxes.

Install the voltage barrier in the backbox with

the provided screw, separating the power

side from the data side (see image at right).

Note:

The canopy fixture can be installed directly on 4” and

4-11/16” backboxes, or on backboxes with round cover

plates. The canopy fixture cannot be installed on 1-gang

backboxes or trim rings.

CAUTION:

• DMX control is a Class 2 circuit. DMX wiring cannot be

run through the same conduit as line voltage power-

supply conductors.

• Separate the line voltage from the data side in the

backbox. Install the voltage barrier provided by ETC.

6Irideon WLZ

Connect Canopy Wiring (DMX variant)

Cable preparation instructions for DMX termination are included in the

termination kits, and are also available for free download at etcconnect.com.

1: Remove the adhesive tape or fasteners securing the mounting plate to

the fixture to free the mounting plate from the canopy enclosure.

2: Are you flush-mounting the fixture or surface-mounting the fixture?

•Flush-mounting: Continue to step 3.

•Surface-mounting:

Position the cover

plate on top of the

mounting plate

before wiring the

fixture. The cover

plate is required

when the interior of the canopy enclosure could be exposed after

installation with only the mounting plate (the mounting surface is

smaller than the canopy enclosure).

3: Terminate DMX/RDM input from the

control source to the backbox.

If using Belden 9729:

a: See the

DMX Cable Preparation

for Screw Termination Setup

Guide

for instructions to prepare

and terminate Belden 9729 for

DMX input cable to the screw

terminal connector.

b: Install the screw terminal

connector with wires terminated

to the DMX/RDM Input receptacle

on the termination board.

WARNING:

RISK OF ELECTRIC SHOCK! Install the cover plate as

directed below for installations where the interior of the

canopy enclosure could be exposed after installation

with only the mounting plate. For example, install the

cover plate when installing to a surface-mount backbox.

Mounting plate

Cover plate

(if needed for

surface-mounting)

From a DMX/RDM source

Data – (Black)

Data + (Red)

Belden 9729 (or equivalent) wire

termination to screw connector

4 to 8 = n/c

COM

Andere Handbücher für Irideon WLZ

Inhaltsverzeichnis

Andere ETC Beleuchtungsausrüstung Handbücher

ETC

ETC fos/4 Fresnel Theatrical Yoke Bedienungsanleitung

ETC

ETC Expression 2.0 Bedienungsanleitung

ETC

ETC fos/4 Series Bedienungsanleitung

ETC

ETC Echo Bedienungsanleitung

ETC

ETC Source Four HID PARNel Bedienungsanleitung

ETC

ETC Sensor IQ Contact Input Control Option Card Bedienungsanleitung

ETC

ETC Source Four LED Series Bedienungsanleitung

ETC

ETC Express 24/48 Bedienungsanleitung

ETC

ETC Lustr+ Bedienungsanleitung

ETC

ETC Source Four Revolution Scroller Cartridge Bedienungsanleitung

ETC

ETC Selador Series Bedienungsanleitung

ETC

ETC Source Four LED Series Bedienungsanleitung

ETC

ETC XDLT 26 Bedienungsanleitung

ETC

ETC Halcyon Gold Bedienungsanleitung

ETC

ETC High End Systems SolaPix 19 Bedienungsanleitung

ETC

ETC ELTS2 Bedienungsanleitung

ETC

ETC CE Source Four Bedienungsanleitung

ETC

ETC fos/4 Series Bedienungsanleitung

ETC

ETC Source Four Mini LED Bedienungsanleitung

ETC

ETC ColorSource Spot jr v2.0 Bedienungsanleitung

ETC

ETC Source 4WRD Bedienungsanleitung

ETC

ETC Source Four Mini LED Bedienungsanleitung

ETC

ETC Express Bedienungsanleitung

ETC

ETC Source Four MultiPAR Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung