EtherWAN EX32008 Series Bedienungsanleitung

EX32008 series Industrial Ethernet Switch www.etherwan.com

This quick start guide describes how to install and use the Industrial Ethernet Switch.

Capable of operating at temperature extremes of -10°C to +60°C, this is the Switch of

choice for harsh environments constrained by space.

The Terminal Block and Power Inputs

Physical Description

The Port Status LEDs

LED State Indication

Steady Power on.

Power 1, 2 (Green) Off Power off.

Steady Relay starts alarm.

Fault (Red) Off Relay non-alarm.

10/100TX or 100FX/BX Ports

Steady A valid network connection established.

Blinking Transmitting or receiving data.

Act stands forActivity.

Link/Act (Green) Off No link.

Power Input Assignment

＋12~48VDC

Power 1

－Power Ground

＋12~48VDC

Power 2

－Power Ground

Earth Ground

Terminal Block

Relay Output Rating 1A @ 250VAC

DC Terminal Block Power Input: The DC Terminal Block power input can be used to

power up this Switch.

DIP Switch Settings

DIP No. On Off

1 Port 1 Alarm Enable. Port 1 Alarm Disable.

2 Port 2 Alarm Enable. Port 2 Alarm Disable.

3 Port 3 Alarm Enable. Port 3 Alarm Disable.

4 Port 4 Alarm Enable. Port 4 Alarm Disable.

5 Port 5 Alarm Enable. Port 5 Alarm Disable.

6 Port 6 Alarm Enable. Port 6 Alarm Disable.

7 Port 7 Alarm Enable. Port 7 Alarm Disable.

8 Port 8 Alarm Enable. Port 8 Alarm Disable.

W70G-EX32008Q1

EX32008 series Industrial Ethernet Switch www.etherwan.com

2 W70G-EX32008Q1

The Ethernet Connectors

The 10/100Base-TX Connections

The following lists the pinouts of 10/100Base-TX ports.

Pin Regular Ports Uplink port

1 Output Transmit Data + Input Receive Data +

2 Output Transmit Data - Input Receive Data -

3 Input Receive Data + Output Transmit Data +

4 NC NC

5 NC NC

6 Input Receive Data - Output Transmit Data -

7 NC NC

8 NC NC

The 100Base-FX Connections

The fiber port pinouts

The Tx (transmit) port of device I is connected to the Rx

(receive) port of device II, and the Rx (receive) port of device I to

the Tx (transmit) port of device II.

The WDM 100Base-BX Connections

The fiber port pinouts

Only one optical fiber is required to transmit and receive data.

Functional Description

Complies with EN61000-6-2 & EN61000-6-4 EMC Generic standard immunity for

industrial environment.

Supports IEEE802.3az 10Base-Te only. 10Base-T is not supported. 10Base-Te is

fully interoperable with 10Base-T over 100m of class D (Category 5) or better

cabling as specified in ISO/IEC 11801:1995.

Supports 802.3az/802.3u/802.3x. Auto-negotiation: 10/100Mbps, Full/Half-duplex.

Auto MDI/MDIX.

100Base-FX: Multi/Single mode SC or ST type. 100Base-BX: WDM Single

mode SC type.

Supports 1024 MAC addresses, 448K bits buffer memory.

Supports IEEE802.3az Energy Efficient Ethernet (EEE).

IEEE802.1Q VLAN Tag Based Priority, Class of Service.

Output Queue Schedule Mode: Weighted Round Robin (WRR) with 2 priority

queues.

Power Supply: Redundant 12~48VDC Terminal Block power inputs.

Power consumption: 2.47W Max.

Provides reverse polarity protection.

Supports normal close and normal open.

Operating temperature ranges from -10°C to 60°C (14°F to 140°F).

Slim design with DIN-Rail mount installation.

Assembly, Startup, and Dismantling

Assembly: Place the device on the DIN rail from above using the slot. Push the

front of the device toward the mounting surface until it audibly snaps into place.

Startup: Connect the supply voltage to start up the device via the terminal block.

Dismantling: Pull out the lower edge and then remove the device from the DIN

rail.

Andere EtherWAN Schalten Handbücher

EtherWAN

EtherWAN EX73900 Series Bedienungsanleitung

EtherWAN

EtherWAN EX78000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX63000 Series | Bedienungsanleitung

EtherWAN

EtherWAN EX42300 series Bedienungsanleitung

EtherWAN

EtherWAN EX78900X Series Bedienungsanleitung

EtherWAN

EtherWAN EX83000 Bedienungsanleitung

EtherWAN

EtherWAN EX63000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX76000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX78000 Series Bedienungsanleitung

EtherWAN

EtherWAN ER59000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX19162 Bedienungsanleitung

EtherWAN

EtherWAN EX45900 series Bedienungsanleitung

EtherWAN

EtherWAN EX33000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX42395BT Bedienungsanleitung

EtherWAN

EtherWAN EX42395AT Bedienungsanleitung

EtherWAN

EtherWAN OttoE TF100 Sereis Bedienungsanleitung

EtherWAN

EtherWAN EX62000 Bedienungsanleitung

EtherWAN

EtherWAN EX89000 Bedienungsanleitung

EtherWAN

EtherWAN EX26262F Bedienungsanleitung

EtherWAN

EtherWAN EX77000 Series Bedienungsanleitung

EtherWAN

EtherWAN EG97000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX17162A Bedienungsanleitung

EtherWAN

EtherWAN EX42000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX78900 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung