Eureka 7700 Series Bedienungsanleitung

Index

Important Safeguards ........... 2

Service Information............... 4

Thermal Cut Off .................... 4

Use........................................ 5

Dirt Alert Feature .................. 6

Accessories........................ 7-8

Brush Roll ............................. 9

Brush Roll Belt ...................... 9

Dust Bag ........................ 10-11

Light Bulb ............................ 11

Problem Solving.................. 12

Customer Order Form......... 13

Warranty.............................. 15

Upright Vacuum Cleaner

Owner’s Guide

7700-7900 Series

Household Type

www.eureka.com

IMPORTANT

Do not return this

product to the store.

For assembly problems or

questions contact: Eureka’s

Customer Service Division toll

free at 1-800-282-2886*, 7 a.m.

to 8 p.m., Central Standard

Time, Monday through

Saturday.

For replacement of broken

or missing items to be

shipped direct to you, call

1-800-438-7352*, 8 a.m. to

4:45 p.m., Central Standard

Time, Monday through Friday.

*En Mexico llame al 5670-6169.

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING

To reduce the risk of fire, electric shock, or injury:

•Do not use outdoors or on wet surfaces.

•Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the electrical cord when not in use and

before servicing.

•Do not allow to be used as a toy. Close attention is necessary when used by or near children.

•Use only as described in this manual. Use only manufacturer’s recommended attachments.

•Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left

outdoors, or dropped into water, return it to a service center before using.

•Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do

not run vacuum cleaner over cord. Keep cord away from heated surfaces.

•Do not use extension cords or outlets with inadequate current carrying capacity.

•Turn off all controls before unplugging.

•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•Do not handle plug or vacuum cleaner with wet hands.

•Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that

may reduce airflow.

•This vacuum cleaner creates suction and contains a revolving brush roll. Keep hair, loose clothing, fingers, and all parts

of body away from openings and moving parts.

•Do not place cleaner on furniture or stairs as the brush roll may cause damage. Place cleaner on floor with the handle in

storage position while using attachments.

•Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

•Do not use without dust bag in place.

•Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive

belt.

•Use extra care when cleaning on stairs.

•Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.

•Unplug your cleaner and store indoors in a cool, dry area.

•Keep your work area well lighted.

•Unplug electrical appliances before vacuuming them.

SAVE THESE INSTRUCTIONS

CONSEILS DE SÉCURITÉ

Lorsdel’utilisationd’unappareilélectrique,quelquesprécautionsélémentairesdoiventêtreobservées,incluantlessuivantes:

LISEZ TOUTES LES INSTRUCTIONSAVANT D’UTILISER VOTREASPIRATEUR.

AVERTISSEMENT

Pour réduire le risque de feu, de choc électrique, ou de blessure:

•Ne pas utiliser à l’extérieur ou sur des surfaces mouillées.

•Fermez le commutateur et débranchez l’appareil lorsque vous ne l’utilisez pas ou avant le nettoyage ou l’entretien.

•Ne permettez pas qu’il soit utilisé comme jouet. Une attention particulière est nécessaire lorsque utilisé par ou prés d’un

enfant.

•Suivezlesrecommandations d’utilisation decemanuel.Utilisezuniquement lesaccessoiresrecommandésparle fabriquant.

•Ne pas utiliser si le cordon ou la fiche sont endommagés. Si l’aspirateur ne fonctionne pas comme il le devrait, s’il a été

échappé, s’il est endommagé, s’il a été laissé à l’extérieur ou échappé dans l’eau, retournez-le à un centre de service

avant d’utiliser.

•Ne pas le tirer ou le transporter par le cordon, ne pas utiliser le cordon en guise de poignée. Ne pas fermer une porte sur

le cordon ou tirer le cordon sur des coins ou bordures pointus. Ne pas circuler sur le cordon avec l’aspirateur. Tenir le

cordon à distance des surfaces chauffantes.

•Ne pas utiliser des rallonges ou des prises qui n’ont pas de capacité suffisante pour transporter le courant.

•Fermer tous les contrôles avant de débrancher.

•Ne pas débrancher en tirant sur le cordon. Pour débrancher, tenez la fiche et non le cordon.

•Ne pas manipuler la fiche ou l’aspirateur avec les mains mouillées.

•Ne pas rien insérer dans les ouvertures. Ne pas utiliser si des ouvertures sont bloquées; assurez-vous qu’elles soient

dégagées de poussière, mousse, cheveux ou toute autre chose qui pourrait réduire le passage de l’air.

•Cet aspirateur crée de la succion et contient un rouleau-brosse tournant. Tenir les parties mobiles et les ouvertures loin

des cheveux, du linge, des doigts et de toute partie du corps.

•Ne pas mettre l'aspirateur sur les meubles ou sur les escaliers car le rouleau-brosse peut faire des dommages. Placer

l'aspirateur sur le plancher avec le manche en entreposage position temps que les accessoires sont en usage.

•Ne pas ramasser des objets qui brûlent ou fument comme les cigarettes, allumettes ou cendres chaudes.

•N’utilisez pas sans le sac de poussière en place.

•Les poulies du courroie peuvent devenir chaudes pendant l’utilisation normale. Pour prévenir des brûlures, évitez de

touché la poulie du courroie lorsque vous réparez la courroie.

•Portez une attention particulière lorsque vous nettoyez les escaliers.

•Ne pas utiliser pour ramasser des liquides inflammables ou combustibles comme de l’essence: Ne pas utiliser dans les

endroits où ces liquides pourraient être présents.

•Débrancher l’aspirateur et entreposer à l’intérieur dans un endroit propre et sec.

•Maintenez un bon éclairage à l’endroit où vous travaillez.

•Débrancher les appareils électrique avant de les balayer.

CONSERVEZ CES INSTRUCTIONS 3

To reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit

in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a

qualified electrician to install the proper outlet. Do not change the plug in any way.

Afin de réduire le risque de choc électrique, cet appareil est muni d'une fiche polarisée (une des lames est plus large).

Cette fiche ne peut être insérée dans une prise polarisée que d'une seule façon. Si la fiche ne peut être insérée dans la prise,

retourner la fiche. Si la fiche ne peut toujours pas être insérée dans la prise, faire installer une prise adéquate par un

électricien qualifié. Ne pas modifier la fiche.

GENERAL INFORMATION

The cleaner is designed to pick up dirt and dust particles.Avoid picking up hard or sharp objects with the cleaner to prevent

bag tears, hose clogs, and fan blade breakage with subsequent motor damage.

Service Information

The instructions in this booklet serve as a guide to routine maintenance. For additional service information telephone our toll

free number for the nearest Eureka Authorized Warranty Station. You should know the model, type and serial numbers

when you call: USA: 1-800-282-2886

Mexico: 5670-6169

Canada: 1-800-282-2886

If you prefer, you can write to The Eureka Company, Service Division, 807 North Main Street, Bloomington, Illinois 61701,

USA. In Canada write to The Eureka Company, 866 Langs Drive, Cambridge, Ontario N3H 2N7. Refer to The Eureka Limited

Warranty for complete service information.

Rating Plate

The model, type, and serial numbers are indicated on the rating plate located on the back of the cleaner. For prompt and

complete service information, always refer to these numbers when inquiring about service.

Model & Type__________________________________

Serial No. _____________________________________

Thermal Cut Off

This vacuum cleaner has a special thermostat that protects the cleaner from further damage in case of serious motor

overheating. If the cleaner suddenly shuts off, unplug the unit, discontinue use, and take it to a Eureka Authorized Service

Center for repair.

NOTE: The thermostat will reset after the motor cools off.

MODEL TYPE SERIAL NO.

VOLTS AMPS. HERTZ

SERVICE INFORMATION: 1-800-282-2886

THE EUREKA COMPANY

DO NOT OIL the motor or the brush roll at any time. The bearings are permanently lubricated and sealed.

BLOOMINGTON, ILLINOIS 61701

Carpet/Floor

Tools

HOW TO USE

CAUTION: Moving parts, make sure on/off switch is in off position before plugging in. NEVER LEAVE PLUGGED IN

CLEANER UNATTENDED.

An upright vacuum cleaner will clean any type of carpet. Use the attachments to clean upholstery or bare floors. When

using attachment tools, place the handle in the upright position. Do not place cleaner on furniture or steps as the

brush roll may cause damage.

Cleaner Height Setting

WARNING: Avoid injury. Keep loose clothing, hair,

fingers, and all other parts of body away

from any moving part (such as the

revolving brush). Turn off the switch and

unplug the cleaner before changing the

cleaner height setting.

The front of the cleaner has an adjustment that raises or

lowers the cleaner base to match the type of carpet. With

the cleaner cord unplugged, and the cleaner handle in

the“operate” position, set theadjustment to lowest setting

for maximum cleaning.Adjust to a higher setting to make

pushing easier and to provide longer belt life. The brush

roll must reach the carpet for effective cleaning.

For ease in moving adjustment knob, tilt the cleaner back

to remove weight from front wheels.

Handle

Release

Clean

Under

Store or

Use Attachments

Operate

1. Adjust cleaner height setting to lowest position for

maximum cleaning. See section below.

2. Push selector to Carpet/Floor cleaning.

3. Plug electrical cord into outlet.

4. Step on handle release. Pullhandle back to a comfortable

position. There are three positions: store, operate and

clean under.

5. On handle, push On (-) or Off (O) power switch. Some

models have three positions: On, ESP (See page 6) and

Off.

INSTRUCTIONS FOR 7700 SERIES

1. Adjust cleaner height setting to lowest position for

maximum cleaning. See section below.

2. Plug electrical cord into outlet.

3. Step on handle release. Pullhandlebacktoacomfortable

position. There are three positions: store, operate and

clean under.

4. On handle, push On (-) or Off (O) power switch.

Carpet

Adjustment

INSTRUCTIONS FOR 7900 SERIES

attachments

NORMAL

carpets

How to Check the Dirt Alert Sensor for Interruption in Light Beam

There is an emitter and sensor lens located in each side of the dirt channel in the bottom of the base unit. In order to operate

efficiently, the lens will need to be wiped off with a damp cloth followed by a dry cloth periodically.

NOTE: Turn off the switch and unplug the electrical cord before removing base plate on the base unit.

Dirt Alert Feature

The dirt alert sensor uses infra-red technology to indicate whether or not floors are clean. When debris breaks the light

beam, the red light comes on indicating additional cleaning is needed in this area. If there is no break in the light beam, the

floor is clean and no red light will come on.

The red light indicates dirt, dust, etc. is still

beingremovedfrom the area being cleaned.

ESP - Extra Suction Power (On some models)

The ESP feature provides two settings for cleaning power. Position one setting should be used for normal floor cleaning.

Position two setting should be used when using attachments or for cleaning high traffic areas.

A three position switch in the handle (offered on some models) will indicate if your cleaner offers this ESP feature.

NOTE: The dirt alert feature is not intended to be used for above the floor cleaning with attachments.

Tabs

Slots

Base

Plate

Dirt

Channel

Emitter/

Sensor

Lens

1. Turn the cleaner over. Pull up firmly

to remove base plate.

2. Wipe off emitter and sensor lenses

with a damp cloth followed by a dry

cloth.They are located at the bottom

of the side walls in the dirt channel.

Check the brush roll for any threads,

hairs, etc. and remove.

3. Slant front of base plate tocatchtabs

into cleaner slots. Push down above

each hook to snap base plate back

into place.

If the red light stays on continuously, you can quickly check to

seeif the dirt sensoris working properly.Tipthe vacuum backwards

onrear wheels, lifting the brushroll off the carpet a coupleofinches,

after a few seconds the light should turn off. If it does not, then turn

the vacuum off, unplug it and continue on to the next section of

checking the dirt sensor for light beam interruption.

HINT: IFTHE RED LIGHT WILLNOT GO OFF,turnoffthe vacuum,

unplug and check for debris in the dirt channel which may

be blocking the sensor beam.

Or, the dirt sensor maybedirty.Seethe next section to clean

the emitter/sensor lenses.

(On some models)

When using your new vacuum you may be cleaning deep down hidden dirt missed by your old vacuum causing the light to

stay red longer. With frequent cleaning, after the first few times you use your new Eureka vacuum, the red light should go

on less.

Notch

Release

Button

1. Remove quick connect hose.

2. Open and hold the attachment door.

3. Push hose converter into attachment door (be sure

notch in the converter is toward back of cleaner).

To remove converter, pushbutton on back ofconverter

and lift to remove. Replace hose on the back of cleaner.

Carpet/Floor or Tools Selector

(7900 Series)

The Carpet/Floor or Tools Selector allows instant conversion

from floor to attachment tool cleaning.

Attachment Cleaning

Note: The revolving brush roll does not stop turning when using the attachment tools. Place the handle in the

upright position. Do not place cleaner on furniture or steps as the brush roll may cause damage.

Attachment Door

(7700 Series only)

The attachment door allows a quick conversion from

floortoattachmenttoolcleaning.Thequickconnecthose

has a notch in the converter that diverts the air suction

from the brush roll area to the hose and attachments.

Carpet/Floor

Tools

1. Cleaning Carpet/Floor: Push selector switch back. This

directs the suction to the floor.

2. Cleaning with Tools: Pushselectorswitchforward.This

directsthesuctiontothehoseand

tools.

How To Use Attachments

NOTE: Do not place cleaner on furniture or steps as the brush roll may cause damage. Place cleaner on floor with

the handle in storage position while using attachments.

Put attachment onto wand. Twist to secure.

Crevice tool cleans corners, baseboards,

between cushions.

Dusting Side

Dusting brush is for furniture, blinds, books,

lamp shades, shelves. (On some models.)

Upholstery nozzle is for curtains, draperies,

cushions, fabrics. (On some models.)

Upholstery

Side

Combination toolgives two types ofcleaningtools:

•Usebrushsidetodust furniture, blinds, books, lamps,

shelves.

•Useupholstery side for curtains, draperies,cushions,

fabrics.

Extension wands for added reach

Depending on the model of vacuum cleaner you have

purchased,you will have a combinationof the below tools.

1. Turn the cleaner over. Pull up firmly to remove bottom plate.

2. Lift out brush roll and remove belt from motor pulley, discard

old belt.

3. Slide new belt around the motor pulley.

4. Place belt around pulley end of brush roll.

5. Pull left end of brush roll down to stretch belt.Align the end cap

with the base and push down to secure.

6. Align and push down right end cap to secure.

7. Turn the brush roll by hand until the belt centers onto the brush

roll pulley.

8. Slant front of bottom plate to catch tabs into cleaner slots. Push

down until each hook snaps into place.

Use GENUINE EUREKA replacement belt, 54312.

Motor

Pulley

Look for the symbol.

For location of nearest Eureka

Warranty Station or Service

information call 1-800-282-2886.

Tabs

Slots

Pull Pull

HOW TO MAINTAIN

The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the bag,

belt, and brush roll often.

Brush Roll

The brush roll turns to brush and sweep the carpet. Periodically remove hair and threads from the brush roll so it can

continue to brush the carpet. To maintain the most efficient cleaning, the bristles must touch the carpet. To test the bristle

length, hold a ruler against the underneath side of the cleaner. If the bristles no longer touch the ruler, replace the brush roll.

Brush Roll Belt

The brush roll belt turns the brush roll as the bristles sweep and

brush the carpet. Check the belt regularly to be sure it is in good

condition. Replace the belt if it stretches, cracks or loses tension.

Cut away any hair or threads wound around the brush roll or the

belt pulley because the buildup could cause the belt to rotate

unevenly.

How to Replace Brush Roll Belt

NOTE: Turn off the switch and unplug the electrical cord

before replacing belt. Belt pulleys can become hot

during normal use. To prevent injury, avoid touching

the motor pulley when checking the belt.

CAUTION: Improper installation of the brush roll could cause

carpet or cleaner damage.

TabTab

GENUINE

EUREKA PRODUCT

Slots

Tabs

Disposable Dust Bags

The disposable dust bag plays a very important role in the efficiency of a vacuum cleaner. The purpose of the paper bag is

to trap dirt. As the bag traps dirt, it must also be porous enough to allow air to pass on through. If the paper bag becomes

clogged, no air can pass through the cleaner and no cleaning can take place regardless of how powerful the unit. Change

the dust bag frequently. Some fine particles can restrict airflow very quickly and will decrease performance even before the

bag appears to be full.

When vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar fine substances, the bag may require more

frequent changes.

Be sure to use GENUINE EUREKA bags for best performance. If a clean dust bag does not restore maximum performance,

check for obstructions in the hose or airflow passage.

How To Change Dust Bag – Style U

NOTE: Turn off the switch and

unplug the electrical cord

before changing dust bag.

Never operate the vacuum

cleaner without the dust bag.

Lift

Out

Bag

Latch

Bag

Collar

Pins

Tabs

Bag

Inlet

Hard Case Model

1. Remove the bag cover by pushing up on bag latch

and lifting cover out and away from the unit.

2. Fold top of paper bag down. Grasp bag collar to

remove dirty bag from bag inlet. Discard bag.

3. Hold new dust bag collar facing the bag inlet.

4. Secure lower portion of bag collar behind the tabs.

5. Push bag collar over bag inlet.

6. Snap onto the two pins at the top.

7. Tuck top and bottom of paper bag into the dust bag

compartment.

8. Replace bag cover by putting tabs on bag cover into

the slots on the unit, then push bag cover up until

bag latch clicks into place.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Eureka Staubsauger Handbücher

Eureka

Eureka 400 Series Bedienungsanleitung

Eureka

Eureka 8800 Series Bedienungsanleitung

Eureka

Eureka NES215A Bedienungsanleitung

Eureka

Eureka AS3001 series Bedienungsanleitung

Eureka

Eureka 5550 Series Bedienungsanleitung

Eureka

Eureka AS1000 Series Bedienungsanleitung

Eureka

Eureka 5400 Series Bedienungsanleitung

Eureka

Eureka 79A Bedienungsanleitung

Eureka

Eureka 8860-8899 series Bedienungsanleitung

Eureka

Eureka 4700 Series Bedienungsanleitung

Eureka

Eureka 5740 series Bedienungsanleitung

Eureka

Eureka 3690 Bedienungsanleitung

Eureka

Eureka NEC580 Series Bedienungsanleitung

Eureka

Eureka 60 Series Bedienungsanleitung

Eureka

Eureka Oxygen 6999 Bedienungsanleitung

Eureka

Eureka 2800 Series Bedienungsanleitung

Eureka

Eureka AS3350 series Bedienungsanleitung

Eureka

Eureka 5890 Series Bedienungsanleitung

Eureka

Eureka 8800 Series Bedienungsanleitung

Eureka

Eureka 160 Series Bedienungsanleitung

Eureka

Eureka NEC180 Series Bedienungsanleitung

Eureka

Eureka 8850 Series Bedienungsanleitung

Eureka

Eureka AS100-AS119 Series Bedienungsanleitung

Eureka

Eureka 4750 Series Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung