EverFocus EAN7221 Bedienungsanleitung

Star Light Box Network Camera

EAN7221/7260/7360

Ultra Low Light Network Camera

Quick Installation Guide

** Lens not included.

Release Date: March, 2016

EAN7221/7260/7360

1. Physical Description

267

10 11 13

No.

Item Name

Descriptions

1 Auto Iris Lens Connector Plug the iris control cable to the connector.

2 Microphone One built-in microphone.

3 Light Sensor Detects lights.

4 Ethernet / PoE Connects to a 10BASE-T / 100BASE-TX Ethernet or PoE.

5 Power LED After powering the camera, the power LED will be lit in red.

6 DC 12V Port Connects to 12VDC power.

7 Alarm Connects to I/O devices (see I/O Terminal Block for more details

later).

8 Audio In Connects to microphones (In) / Speakers (Out). Note that the

audio input / output features a line 3.5mm jack (TRS). Be sure

to prepare microphones / speakers with TRS connector (see TRS

Connector image below). Also, microphones / speakers with a

(built-in) amplifier and external power supply are required.

9 Audio Out

10 AC 24V Port Connects to 24VAC~ power.

11 Micro SD / SDHC Card Slot Insert a micro SD / SDHC card to store recording data.

12 Video Out Connects to a portable monitor using the supplied BNC cable

for testing the camera view during initial installation.

13 USB USB slot is currently reserved.

14 Reset Button Press and hold the button for 6 seconds to reset all

configurations to factory default.

EAN7221/7260/7360

TRS Connector

Left Channel (Tip)

Right Channel (Ring)

Ground (Sleeve)

To activate the Audio function, the Enable Audio must be

checked. You can also select Audio Input from line-in or mic-in.

See 7.2.1 Streaming and Audio in the User’s Manual in the

software CD.

System Requirements

Before installing, please check that your computer meets the following system requirements.

Operating System Windows 7 (32 and 64-bit) or above

CPU Intel Core i5 CPU @ 2.0GHz (or equivalent AMD) or higher

(Intel Core i7 CPU @ 3.4GHz recommended)

Graphic Card 512MB RAM graphic cards (or equivalent on-board graphic cards)

RAM

•

2GB or more (8GB recommended)

•Additional HD space depends on required local storage of video files,

100 Mbps network card.

Software

•

DirectX 9.0c

•Internet Explorer 9 and later, Firefox 4.0-9.0, Chrome (Windows

version 44 and earlier)

Dimensions

118.10mm/4.65" 68.30mm/2.69"

56.40mm/2.22"

EAN7221/7260/7360

I/O Terminal Block

The I/O terminal block, located on the rear panel of the camera, can be used to develop application

for alarm in / out and RS-485 devices.

1 2 3 4 5 6

Pin Assignment

No. Function No. Function No. Function

1 Alarm COM (-) 3 Alarm Input (+) 5 RS-485+

2 Alarm Output (+) 4 Digital GND (-) 6 RS-485-

Packing List

•

EAN Series Camera (lens not included) x 1

•

Software CD x 1

•

Quick Installation Guide x 1

•

Tool Packet x 1 (contains the following items)

-C-Mount Lens Adapter - Video Test-Out Cable (BNC)

-Hexagon Wrench - Power Pigtail Cable

-2 MAC Address Stickers

-¼-20 UNC Thread Mounting Bracket and 2

Screws

-Two-Pin Terminal Block (24VAC~)

Note:

1. Equipment configurations and supplied accessories vary by country. Please consult your local

EverFocus office or agents for more information. Please also keep the shipping carton for

possible future use.

2. Contact the shipper if any items appear to have been damaged in the shipping process.

EAN7221/7260/7360

Optional Accessories

You can use the optional accessories to expand the capabilities and versatility of the camera. Please

contact your dealer for more information.

•EFV-M1600DCIR

1/2.5" F=1.67mm, DC IRIS F/1.8, IR CS Mount (5 MegaPixel)

•EFV-M0940DCIR

1/2”, MP Lens, F=9-40mm, DC IRIS, CS mount (5 MegaPixel)

•EFV-M1803IR

1/2" 1.8-3mm, Manual IRIS F/1.8, IR CS Mount (5

MegaPixel)

•EFV-M1803DCIR

1/2" 1.8-3mm, DC IRIS F/1.8, IR CS Mount (5 MegaPixel)

•BA-EZN

Bracket for Box Type Cameras

Max. Load: 990g / 2.18lb

Dimensions: 137 x 105.5 x 105mm / 5.39" x 4.15" x 4.13"

Aluminum

•IP Sidekick - ESK1000

Using it for installation, you do not need to pre-configure

the IP address or to use an additional monitor to check and

adjust all the IP cameras. The product can assign an IP

address to the camera, then you can connect and check the

camera live view using EverFocus mobile App EF Sidekick.

For details about IP Sidekick, please refer to the IP Sidekick –

ESK1000 User’s Manual.

EAN7221/7260/7360

•EverFocus 5 / 8 / 16 / 24 Ports

PoE Switch

5 Ports: ES0501-40

8 Ports: ES0812-31 / ES0802-41

16 Ports: ES1625-31 / ES1645-51

24 Ports: ES2426-31 / ES2446-51 / ES2448-62

2. Installation

This installation guide provides the basic instructions on installing an EAN box IP camera.

Lens Installation and Adjustment

You can install either a CS-Mount or a C-Mount lens into the camera. It is recommended to use a

lens with aperture ratio of F/1.2 or smaller. Please refer to the following reference steps.

C-Mount Lens Adapter

DC Auto Iris Lens Connector

Focus Screw

Zoom Screw

C-Mount Lens:

1. Remove the cover cap from the camera body.

2. Install the lens into the camera body using the

supplied C-mount lens adapter.

3. Adjust the lens using the Focus / Zoom Screws.

Note: Installing a C-mount lens without the C-mount lens adapter may damage the camera sensor.

If you are using a DC Auto Iris lens:

1. Remove the cover cap from the camera body.

2. Install the lens into the camera body.

3. Connect the DC cable to the DC Auto Iris Lens Connector.

EAN7221/7260/7360

4. When making final focus adjustment, place the ND filter (not supplied in the package) in front

of the lens to force the lens iris to open, and then adjust the lens using the Focus / Zoom

Screws.

5. Lock the Focus Screw and then remove the ND filter.

CS-Mount Lens:

1. Remove the cover cap from the camera body.

2. Install the lens into the camera body.

3. Adjust the lens using the Focus / Zoom crews.

Top / Bottom-Mount

You can use the supplied mounting bracket and screw it on the top of the camera body to suspend

the camera, or on the bottom of the camera body to support the camera.

Top Mount

Bottom Mount

EAN7221/7260/7360

Basic Connection

1. Use a standard network cable to connect the camera to the network.

2. Connect the camera to power using one of the following methods:

•Connect the camera to a 12VDC power source using the supplied Power Pigtail Cable.

•Connect the camera to a 24VAC~ power source using the supplied Two-Pin Terminal Block.

•Using the PoE function and the power will be provided over the network cable.

3. Optionally connect the camera to a monitor using the supplied video Test-Out BNC Cable.

4. Optionally connect the camera to the speakers and microphones. Note that the audio input /

output features a line 3.5mm jack (TRS). Be sure to prepare speakers / microphones with TRS

connector. Also, speakers and microphones with a (built-in) amplifier and external power supply

are required. You can also use the built-in Microphone on the front panel of the camera (See

Physical Description for more details).

5. Optionally connect the camera to the input / output devices.

After powering the camera, the power LED will be lit in red and you can access the live view and

adjust the image clarity.

EAN7221/7260/7360

3. Accessing the User Interface

You can look up the IP address and access the Web interface of the IP camera using the IP Utility

(IPU) program, which is included in the software CD. The IP Utility can also be downloaded from

EverFocus’ Website: http://www.everfocus.com.tw/HQ/Support/DownloadCenter_p1.aspx

(Support > Download Center > Keyword Search: IP Utility). Please connect the IP camera on the

same LAN of your computer.

1. Save IP Utility Setup .exe in your computer. Double click the .exe file and follow the

on-screen instructions to install the IP Utility.

2. Click the Finish button, the IP Utility will be automatically launched to search the IP devices

connected on the same LAN.

3. To access the Live View window, double click the IP address of the desired device, the login

window pops up. Type the user ID and password to log in. By default, the user ID is user1

and the password is 11111111.

EAN7221/7260/7360

4. If you log in for the first time, follow the on-screen instructions to update the latest Plugin

version (ePlayer). After reloading the webpage, the login window pops up again. Type the

user ID and password to log in again. By default, the user ID is user1 and the password is

11111111.

5. Now you will be able to see the remote live page.

Note:

1. The “Download ePlayer Instruction” page will only be prompted for the first time login in

order to update the system to the latest Plugin version.

2. If the Error window appears, please be sure to close ALL the Web browser windows first

and then click Retry. When the Completing the ePlayer Setup Wizard window shows up,

click Finish. Then, you can open a new browser again to access the camera’s remote Web

interface.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere EverFocus Sicherheitskamera Handbücher

EverFocus

EverFocus EBA2880 eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EHD Series Schulungshandbuch

EverFocus

EverFocus EZ 425W2 Betriebsanleitung

EverFocus

EverFocus EHD300/N-2 Bedienungsanleitung

EverFocus

EverFocus EAN600 Bedienungsanleitung

EverFocus

EverFocus Weatherproof Long Range IR Camera 235E Bedienungsanleitung

EverFocus

EverFocus Value IP EZN1240-SG Bedienungsanleitung

EverFocus

EverFocus ED100 Series Bedienungsanleitung

EverFocus

EverFocus eZ Tracker EFN3320 Bedienungsanleitung

EverFocus

EverFocus ECD900 eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EZ-PLATECAM2-002 Bedienungsanleitung

EverFocus

EverFocus UNI IP Series Bedienungsanleitung

EverFocus

EverFocus EDH5210 Betriebsanleitung

EverFocus

EverFocus Weatherproof Long Range IR Camera EZ230E Bedienungsanleitung

EverFocus

EverFocus eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EHH5200 Bedienungsanleitung

EverFocus

EverFocus EDN228 Bedienungsanleitung

EverFocus

EverFocus EDH5205 Betriebsanleitung

EverFocus

EverFocus ED700W Bedienungsanleitung

EverFocus

EverFocus EHA1280 eZ.HD Series Bedienungsanleitung

EverFocus

EverFocus EPTZ850 Bedienungsanleitung

EverFocus

EverFocus M107-N501-001 Bedienungsanleitung

EverFocus

EverFocus WDII EQ600 Bedienungsanleitung

EverFocus

EverFocus EHN3340 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung