EverFocus M105-DE100-002 Bedienungsanleitung
OPERATION MANUAL
HIGH RESOLUTION
DOME CAMERA
M105-DE100-002
Thank you for choosing our high quality camera.
Before attempting to connect operate this unit, please read and follow these instructions.
CONTENTS
1. Cautions
2. Features
3. Package
4. Overview and function
5. Installation
6. Connection
7. Dimensions
8. Specifications
9. OSD Menu Structure
3
1. CAUTIONS
4
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio / tv technician for help.
Caution
Any changes or modications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
1. A regulated DC12V 1A power supply is recommended for use with this camera
for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera.
When unregulated power supply is applied, product warranty will be out of subject.
2. It is recommended that the camera is used with a monitor that has a CCTV quality
75 video impedance level.
If your monitor is switched to high impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal componets.
Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reective light, which may
cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.
6. Do not expose the camera to rain or other types of liquid.
7. The apparatus must be connected to a mains socket-outlet with a protective earthing
connection.
1. CAUTIONS
5
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicate that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
This product should not be mixed with other commercial wastes purchased this
product, or their local government ofce, for details of where and how they can
take item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
Household users should contact either the retailer where they for disposal.
2.Features
• 1/3 960H SONY EXview HAD CCD II
• High Resolution of 700TV Lines
• OSD Function
• Multi Language
(ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN / PORTUGUESE / SPANISH / CHINESE)
• 2DNR
• Privacy Zone
• Motion Detect
• DC12V / AC24V Dual Voltage
• ATR(Adaptive Tone-curve Reproduction / Digital WDR)
The function provides gradation compensation to improve the contrast of subjects both
low-luminance areas and high luminance areas exist in the same picture
• 3-Axis Gimbal
• Service Video connector
The Service Video Connector also provides the installer with an easy way of conguring the
camera.
6
3.Package
1 DOME CAMERA
2VIDEO OUTPUT TEST CABLE
3OPERATION MANUAL
4 SCREW - 3ea
5 MOUNT GUIDE
7
4.Overview and function
8
• Name (Standard)
• CONTROL FUNCTION
(OSD JOYSTICK)
LEFT
UP
RIGHT
DOWN
MENU
• Name (LED Type)
5. Installation
9
NO PART NAME
STANDARD Type LED Type
1Mount Guide
2Housing Botton
3Holder Panning
4Holder Tlit
5Holder Rotate
6Cover Sun Shield Cover LED
7Housing Top
8Cover, Dome
Standard Type
LED Type
When you install the camera, please glue up the end of cable to
keep it stable in order to protect the camera from the humidity problems.
6.Connection
• DUAL(DC 12V/AC24V)
• DC 12V
10
BNC FEMALE
VIDEO
VIDEO IN
DC 12V POWER SUPPLY
BNC FEMALE
VIDEO
VIDEO IN
DC 12V / AC 24V
DUAL POWER SUPPLY
7.Dimensions
Unit : mm
11
Ø136.4
45
95.3
Ø100
Inhaltsverzeichnis
Andere EverFocus Sicherheitskamera Handbücher
EverFocus
EverFocus ECZ930 eZ.HD Series Bedienungsanleitung
EverFocus
EverFocus Eq250 Bedienungsanleitung
EverFocus
EverFocus PoleStar EQ550 Bedienungsanleitung
EverFocus
EverFocus EHD650 Bedienungsanleitung
EverFocus
EverFocus PoleStar EQ550 Bedienungsanleitung
EverFocus
EverFocus PoleStar EQ550 Bedienungsanleitung
EverFocus
EverFocus EB200 Bedienungsanleitung
EverFocus
EverFocus 350HQ Bedienungsanleitung
EverFocus
EverFocus ED610 Bedienungsanleitung
EverFocus
EverFocus EZA1840 eZ.HD Series Bedienungsanleitung
EverFocus
EverFocus ED610 Bedienungsanleitung
EverFocus
EverFocus EHD300/N-2 Bedienungsanleitung
EverFocus
EverFocus EPH5212 Bedienungsanleitung
EverFocus
EverFocus Speed Dome EPTZ900 Bedienungsanleitung
EverFocus
EverFocus M153-HDN552-001 Bedienungsanleitung
EverFocus
EverFocus EBA2580 eZ.HD Series Bedienungsanleitung
EverFocus
EverFocus eZ.HD Series Bedienungsanleitung
EverFocus
EverFocus EDN1220 Betriebsanleitung
EverFocus
EverFocus EZ350 Bedienungsanleitung
EverFocus
EverFocus EPTZ100 Bedienungsanleitung
