Extech Instruments VB450 Bedienungsanleitung

USER GUIDE

Vibration Meter

Model VB450

www. .com information@itm.com1.800.561.8187

EXTECH INSTRUMENTS

2VB450-en-GB_V1.0 6/15

Introduction

Thank you for selecting the Extech Instruments Model VB450.

The VB450 is a portable vibration meter consisting of an

acceleration sensor and a digital measurement display circuit.

It can be used to measure vibration displacement, speed (or

intensity) and acceleration of mechanical equipment.

Equipment such as fans, pumps, compressors, motors, etc. can

be tested.

This device is shipped fully tested and calibrated and, with

proper use, will provide years of reliable service.

www. .com information@itm.com1.800.561.8187

EXTECH INSTRUMENTS

3VB450-en-GB_V1.0 6/15

Safety Notes

Warning: Use extreme care when using this vibration meter to

test mechanical devices. Damage to meter and injury to

persons can occur if this meter is used in a manner not

specified in this User Guide or if nominal, preparatory safety

measures are not taken. Please refer to, and follow, the safety

directives below.

oDo not take measurements on devices where the range is

known to be, or expected to be, outside the specified

measurement range of this device.

oDo not use this instrument if its housing appears cracked,

chipped, or otherwise damaged.

oDo not use this instrument if the sensor or its cable appears

damaged or compromised in any way.

oReplace the battery as soon as the low battery symbol

appears on the meter display.

oRemove the battery if the device is to be stored for > 60

days.

oNever dispose of batteries in a fire. Batteries may explode

or leak.

oDo not attempt to charge the 9V battery. The supplied 9V

battery is not rechargeable. This meter was not designed to

use rechargeable batteries.

oIf the meter operates abnormally, stop testing and have

the unit serviced before further use.

oNever use the meter in a wet environment or in an

atmosphere of combustible or explosive gas.

oDo not open the meter housing; there are no user-

serviceable parts. Contact Extech Instruments directly or

contact point-of-sale personnel for service inquiries.

oProtect the meter’s LCD from shock or vibration; allow only

the magnet and sensor to touch the devices under test.

www. .com information@itm.com1.800.561.8187

EXTECH INSTRUMENTS

4VB450-en-GB_V1.0 6/15

Meter Description

1. LCD Display

2. Three-position switch (selects measurement units)

3. Sensor and magnet

4. Lanyard

5. Power and Data Hold button

6. Service access nut (do not loosen; for service use only)

7. Sensor secure nut (turn counter-clockwise to loosen)

Battery Compartment on rear of meter

www. .com information@itm.com1.800.561.8187

EXTECH INSTRUMENTS

5VB450-en-GB_V1.0 6/15

Operation

Battery Installation and Replacement

Remove the rear battery compartment door by sliding in the

direction of the arrow. Install or replace 9V battery (observe

polarity) and replace the cover.

During operation, if the symbol appears in the display

the battery needs to be replaced.

Never dispose of used batteries or rechargeable batteries in

household waste.

As consumers, users are legally required to take used

batteries to appropriate collection sites, the retail store

where the batteries were purchased, or wherever batteries

are sold.

Disposal: Do not dispose of this instrument in household waste. The

user is obligated to take end-of-life devices to a designated collection

point for the disposal of electrical and electronic equipment.

www. .com information@itm.com1.800.561.8187

EXTECH INSTRUMENTS

6VB450-en-GB_V1.0 6/15

Selecting units of measure

Press and hold the power button. The display will illuminate

and an arrow will indicate the units selected. Slide the function

switch on the top of the meter to select the units desired.

m/s2

Acceleration

Meters per second

squared

PEAK

mm/s

Velocity

Millimeters per second

squared

RMS

m

Displacement

micrometers

Peak to

Peak

Measurements

Attach the sensor to the device to be measured with the

magnet or hold the sensor for nonferrous materials. Press and

hold the power button to display the results. Release the

power button to freeze the results in the display. After 60

seconds the meter will automatically shut off.

www. .com information@itm.com1.800.561.8187

EXTECH INSTRUMENTS

7VB450-en-GB_V1.0 6/15

Specifications

General Specifications

Display 3 ½ digit LCD (0~1999)

Sensor Accelerometer (magnetic base)

Cable Length 0.2m (7.9”) coiled cable

Low battery indication symbol

Power supply 9V Battery

Battery life Approx. 20 hours (alkaline)

Operating conditions 0 to 40oC (32 to 104oF) <90% RH

Storage conditions 0 to 40oC (32 to 104oF) <80% RH

Dimensions 185 x 68 x 30mm (7.3 x 2.7 x 1.2”)

Weight 300 g (10.6 oz.) including battery

Safety Standards GB 4793, 1-2007

For indoor use only

Range and Accuracy

Function

Acceleration

(Peak)

Velocity

(RMS)

Displacement

(Peak to Peak)

Range

0.1 to 199.9m/s2

0.1 to

199.9mm/s

1 to 199.9m

Frequency

Response

10 to 1500Hz

10 to 500Hz

Accuracy

0 to 2.0m/s2

±(10%+ 1 digit)

>2.0m/s2

±(5%+ 1 digit)

0 to 2.0m/s

±(10%+ 1d)

>2.0m/s

±(5%+ 1d)

0 to 2.0μm

±(10%+ 1 digit)

>2μm

±(5%+ 1 digit)

ISO-9001 Certified

www. .com information@itm.com1.800.561.8187

Andere Handbücher für VB450

Inhaltsverzeichnis

Andere Extech Instruments Messgerät Handbücher

Extech Instruments

Extech Instruments SDL310 Bedienungsanleitung

Extech Instruments

Extech Instruments MO260 Bedienungsanleitung

Extech Instruments

Extech Instruments PQ3450-2-NIST Bedienungsanleitung

Extech Instruments

Extech Instruments EN510 Bedienungsanleitung

Extech Instruments

Extech Instruments EasyView EA33 Bedienungsanleitung

Extech Instruments

Extech Instruments CO240 Bedienungsanleitung

Extech Instruments

Extech Instruments LT510 Bedienungsanleitung

Extech Instruments

Extech Instruments LT10 Bedienungsanleitung

Extech Instruments

Extech Instruments CO230 Bedienungsanleitung

Extech Instruments

Extech Instruments ExStik EC500 Bedienungsanleitung

Extech Instruments

Extech Instruments RF153 Bedienungsanleitung

Extech Instruments

Extech Instruments MA160 Bedienungsanleitung

Extech Instruments

Extech Instruments EX810 Bedienungsanleitung

Extech Instruments

Extech Instruments CO220 Bedienungsanleitung

Extech Instruments

Extech Instruments EC210 Bedienungsanleitung

Extech Instruments

Extech Instruments 407735 Bedienungsanleitung

Extech Instruments

Extech Instruments 461880 Bedienungsanleitung

Extech Instruments

Extech Instruments HD300 Bedienungsanleitung

Extech Instruments

Extech Instruments RH350 Bedienungsanleitung

Extech Instruments

Extech Instruments 407768 Bedienungsanleitung

Extech Instruments

Extech Instruments SDL470-NISTL Bedienungsanleitung

Extech Instruments

Extech Instruments SDL800 Bedienungsanleitung

Extech Instruments

Extech Instruments 380801 Bedienungsanleitung

Extech Instruments

Extech Instruments ExStik RE300 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung