F&F LE-01MR v2 Bedienungsanleitung

- 1 -

LE-01MR v2

Electric energy meter,

1-phase

MID Directive 2014/32/EU

Certificate 0120/SGS0305

The LE-01MR v2 is a static (electronic), calibrated AC single-pha-

se electricity meter for direct current measurement in a 2-wire

system.

The meter provides 4-quadrant energy and power measurement

as well as monitoring of many additional network parameters

such as voltage, current, active power, reactive power, apparent

power, frequency, power factor. The meter has additional, era-

sable active and reactive energy meters. It is also equipped with

RS-485 communication interface with Modbus RTU protocol

support for remote meter reading and configuration. The touch

button located on the front panel of the meter allows you to

select the displayed parameter and change the meter settings.

Compliance

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: biuro@fif.com.pl

Do not dispose of this device in the trash along with other waste!

According to the Law on Waste, electro coming from households free of charge and can

give any amount to up to that end point of collec� on, as well as to store the occasion of

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the

environment and human health.

- 2 -

The backlit LCD display makes it easy to read the measured

values.

The parameter is changed by default every 5 seconds or at the

frequency set by the user and manually, using the touch button

on the front of the casing of the meter.

The display is active when the indicator power is on.

Total active energy [kWh]

Active energy imported AE+/AE- [kWh]

Active energy exported [kWh]

Total reactive energy [kvarh]

Reactive energy AE+ [kvarh]

Phase voltage U [V]

Phase current I [A]

Frequency F [Hz]

Active power P [W]

Reactive power Q [var]

Apparent power S [VA]

Power factor cosϕ

Demand active energy imported [W]

Total demand active energy imported [W]

Demand active energy exported [W]

Total demand active energy exported [W]

Demand reactive energy imported [var]

Total demand reactive energy imported [var]

Demand reactive energy exported [var]

Total demand reactive energy exported [var]

Measured values

- 3 -

Description of measurement and configuration registers availa-

ble on the website www.fif.com.pl (on the device’s subpage).

Change of meter address and connection parameters is done via

the RS-485 using the touch button on the front of the casing of

the meter.

The meter is marked with individual serial number allowing its

unambiguous identification. The marking is laser engraved and

cannot be removed).

Modbus registers

Meter address

Meter number

- 4 -

The meter has sealable input and output terminal covers to pre-

vent any attempts to bypass the meter.

Sealing

Front panel

- 5 -

1 LIN power input

3 LOUT power output

N N-wire neutral

23 RS-485 output (A)

24 RS-485 output (GND)

25 RS-485 output (B)

Wiring diagram

- 6 -

1.Disconnect the power supply.

2.Mount the indicator on the rail in the distribution box.

3.Connect the neutral wire to terminal N.

4.Connect the input phase to terminal 1.

5.Connect the measured circuit or single receiver to terminal 3

(output phase L) and to N.

6.Connect terminals 23, 24 and 25 to the RS-485 network.

Program for test reading of the counted energy value and for

basic settings of the meter parameters.

Available at www.fif.com.pl (on the device’s subpage).

For communication of the meter with the computer, the USB

converter CN-USB-485 or any RS-485/USB standard is required.

installation 2-wire

rated voltage 230 V AC

minimum measured current 0.02 A

base current 5 A

maximum current 100 A

voltage measuring range 100÷289 V AC

measurement accuracy (EN50470-1/3) class B

rated frequency 50 Hz

insulation protection class II

housing PC material

own power consumption 10 VA; 1 W

indication range 0÷99999 kWh

display 7-digits backlight LCD

(blue color)

Mounting

LE Config service programm

Technical data

- 7 -

constant 1000 pulses/kWh

communication

Modbus address 1*÷245

port RS-485

communication protocol Modbus RTU

transmission parameters 9600*, 19200, 38400, 115200 bps

parity NONE*, ODD, EVEN

stop bits 1*

read-out signalling red LED

working temperature -25÷55°C

terminal

100 A (1, 3 terminals) 25 mm² screw terminals

neutral (N terminal) 1 mm² screw terminals

communication (23, 24, 25 terminals)

1 mm² screw terminals

dimensions 1 module (18 mm)

mounting on TH-35 rail

ingress protection IP20

_________________

* factory settings

A detailed user manual for the meter, together with a

description of communication and a list of Modbus regi-

sters, is available for download from the product subpa-

ge at www.fif.com.pl.

- 8 -

F&F products are covered by a 24-month warranty from the date

of purchase. The warranty is only valid with proof of purchase.

Contact your dealer or contact us directly.

F&F Filipowski sp. j. declares that the device is in conformity

with the essential requirements of The Low Voltage Directive

(LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC)

Directive 2014/30/UE.

The CE and MID Declaration of Conformity, along with the refe-

rences to the standards in relation to which conformity is decla-

red, can be found www.fif.com.pl on the product subpage.

Dimensions

Warranty

CE declaration

E220912

Andere Handbücher für LE-01MR v2

Inhaltsverzeichnis

Andere F&F Messgerät Handbücher

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung