Fanimation Palmetto FP600 Series Bedienungsanleitung

10983 Bennett Parkway

Zionsville, IN 46077

Toll Free (888) 567-2055

FAX (866) 482-5215

Outside U.S. call (317) 733-4113

Visit Our Website www.fanimation.com

The Palmetto®Ceiling Fan Assembly

INSTALLATION REQUIREMENTS:

It is recommended that each drive shaft support requires backing consisting of 3/4˝plywood (20˝x 20˝) attached to the

ceiling joists, snug above the sheet rock, and able to support 100 lbs. Not recommended for sound-sensitive areas.

ELECTRICAL REQUIREMENTS:

The drive shaft support that contains the motor will require a 120 VAC, 60 Hz, 15 amps electrical feed via a ﬂush mount

junction box positioned on center and wired back to an on/off switch (motor unit is single speed). Any support that

contains a light ﬁxture will also require a junction box on center with a circuit wired back to a dimmer circuit or on/off

switch. The lights and motor should be on separate switch legs.

FAN SPEED:

Single-speed, 15 rpm; NOT designed for signiﬁcant air movement.

BLADE OPTIONS:

Various Palm and Bamboo blades are sold seperately. See Catalog or visit our website, www.fanimation.com for more

blade selections.

LIGHTING OPTIONS:

Optional lighting ﬁtters and light kits are available, including a single bowl ﬁxture with a maximum of 180 watts and

a variety of four-light ﬁxtures with a maximum of 240 watts. Can be only mounted on the cap housing. Installation

instructions provided with each light ﬁtter and light kit. See Catalog or visit our website, www.fanimation.com for more

lighting options.

DAMP LOCATION:

Fan not rated for Damp Location usage.

SPECIFICATION SHEET

Product Speciﬁcations subject to change

The Palmetto®

FP600 Series

The Palmetto® Fan Assembly

Motor Assembly Unit*

Chain-Driven, 115 volt, 60–50 Hz,

0.62–0.76 amps, 1/20 hp

220 VAC, 50 Hz export version available

Finishes: available in 3 ﬁnishes

**Available Finish (codes)

AB Antique Brass

BL Black

Ordering Information (Items Sold Seperately)

Item Catalog No. Description

Fan Assembly

FP601**

FP602**

FP603**

FP604**

FP605**

One Section

Two Sections

Three Sections

Four Sections

Five Sections

Blade Sets

(Includes Blade

Holder, Stem and

Hub)

Up to 3 blade sets can be

used per section.

See Catalog or visit

www.fanimation.com for

more blade information

Dimensional Information

A Overall Length*10´– 50´

B Support Spacing†

119˝(center of base

to center of base)

10´ 5½˝(outside of base

to outside of base)

C Ceiling to Shaft 27˝

D Base Width 6˝

E Base Length 18˝

F Blade Sweep 48˝

G Overall Drop 51˝

H Blade Radius 24˝

I Blade Length 18˝

J Base Stem Length 4˝

**Insert Finish Codes

Dimensions shown in feet & inches

*Available 9´ to 45´ (depending on number of sections)

†Supports can be spaced from between 48˝to 119˝.

Outside of base to outside of base, if entire 108˝shaft is used.

Shaft is cut to length required at installation.

NOTES: Not designed for signiﬁcant air movement.

Not recommended for sound-sensitive areas

(chain-driven motor).

Blades To Floor

7´ minimum

*NOTE: Not recommended for sound-sensitive areas!

Inhaltsverzeichnis

Andere Fanimation Lüfter Handbücher

Fanimation

Fanimation Showroom KUTE 44 FPD8547 Series Bedienungsanleitung

Fanimation

Fanimation HUGH 44 Bedienungsanleitung

Fanimation

Fanimation STELLAR 84 Bedienungsanleitung

Fanimation

Fanimation STELLAR MAD7997 Series Bedienungsanleitung

Fanimation

Fanimation Involution FP4520 Series Bedienungsanleitung

Fanimation

Fanimation FLORID LP8300 Series Bedienungsanleitung

Fanimation

Fanimation The Edgewood TF721 Series Bedienungsanleitung

Fanimation

Fanimation The Benito FP8003 Bedienungsanleitung

Fanimation

Fanimation Bayhill LB270VZ Bedienungsanleitung

Fanimation

Fanimation STAFFORD FP8274 Series Bedienungsanleitung

Fanimation

Fanimation SLINGER LP8147SLMWBN Bedienungsanleitung

Fanimation

Fanimation Sandella FP1820 Series Bedienungsanleitung

Fanimation

Fanimation The Edgewood TF610 Series Bedienungsanleitung

Fanimation

Fanimation AIRE DUO LP8066LBN Bedienungsanleitung

Fanimation

Fanimation LK179 Series Bedienungsanleitung

Fanimation

Fanimation Alamosa FP3820RP Bedienungsanleitung

Fanimation

Fanimation Windpointe MW75 Series Bedienungsanleitung

Fanimation

Fanimation FP8014 Series Bedienungsanleitung

Fanimation

Fanimation AireDrop LP7654LBL Bedienungsanleitung

Fanimation

Fanimation Enigma FP2120MG Bedienungsanleitung

Fanimation

Fanimation The Camhaven FP8095OB Bedienungsanleitung

Fanimation

Fanimation BECKWITH FP7964BN Bedienungsanleitung

Fanimation

Fanimation FARGO FP3320 Series Bedienungsanleitung

Fanimation

Fanimation DUPLEX FPD6254GR Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung