FBII OMNI-408EU Bedienungsanleitung

6HFXULW\6\VWHP

,











,







(

8VHU*XLGH

N9942-2 1/01

TABLE OF CONTENTS (cont’d)

– 2 –

QUICK REFERENCE.....................................3

System Turn On..........................................3

System Turn Off..........................................3

System Turn On/Stay Inside.......................3

System Turn On/Stay Inside/Instant Mode.3

Smoke Detector Reset................................3

INTRODUCTION............................................5

SYSTEM REFERENCE .................................6

SYSTEM OPERATION ..................................9

To Turn the System On and Leave ............9

When the System is Not Ready................10

To Turn the System On and Stay Inside ..10

To Turn the System On In Instant Mode and

Stay Inside................................................11

To Turn the System On In Instant Mode ..12

To Bypass a Zone.....................................12

To Unbypass a Zone ................................13

Turning the System Off.............................13

USER CODES..............................................15

Adding/Changing a User Code.................15

Deleting a User Code...............................15

PAGING FEATURE .....................................16

Follow-Me Displays ..................................16

Changing the Pager Follow-Me Phone

Number.....................................................16

KEYPAD FUNCTIONS.................................18

System Turn On (Maid Code)...................18

Send Help Conditions...............................18

Set Time and Date....................................20

Turn Chime On/Off...................................20

TESTING THE SYSTEM..............................21

System Test..............................................22

Battery Test ..............................................22

RECOMMENDATIONS ON SMOKE

DETECTORS...............................................22

EMERGENCY EVACUATION......................23

SYSTEM LIMITATIONS...............................26

GLOSSARY..................................................29

– 3 –

Quick Reference

System Turn On

Check to make sure the system is ready — Green READY LED is lit.

Enter your 4-digit User Code (or press the ARM button on your keyfob).

The ARMED LED goes on.

Exit through a door designated by your installer as an exit/entry door.

System Turn Off

Enter through door designated by your installer as an exit/entry door.

Enter your 4-digit User Code (or press the DISARM button on your

keyfob).

The ARMED LED goes out.

System Turn On/Stay Inside

Check to make sure the system is ready — Green READY LED is lit.

Press STAY followed by your User Code.

The ARMED and STAY LEDs light.

You must turn the system off if you want to open the door or leave the

premises after the exit time has passed.

System Turn On/Stay Inside/Instant Mode

Check to make sure the system is ready — Green READY LED is lit.

Press INSTANT then STAY followed by your User Code.

The ARMED, INSTANT, and STAY LEDs are all lit.

Smoke Detector Reset

Enter your 4-digit User Code.

– 4 –

Quick Reference (cont’d)

The following table lists the “Quick Commands” available with this

control.

Keystroke Quick Command Keypads Description

# 1 Quick Arm All keypads If system is ready, allows you to arm the system without

requiring your User Code. Your User Code is always

needed to disarm the system.

# 2 Force Arm All keypads Allows you to arm the system even if some zones are

faulted. These zones are automatically bypassed and are

unprotected.

[BYPASS] +

Zone No. Quick Bypass All keypads Allows you to bypass a specific zone number. Must be

enabled by your installer.

# 3 Set Time All keypads Allows entry of the current system time (hours, minutes,

month, day, year).

# 4 Zone Directory LCD only Displays listing of zones in system.

# 55 Display Firmware Version LCD only Displays version of your OMNI-408 firmware.

# 56 Display Keyfob Battery Status All keypads Allows you to test battery status of your keyfob. Upon entry

of this mode, press any button on the keyfob and the keypad

will display if your battery is low.

# 58 Change/View Pager Number All keypads Allows you to redirect pager output to a different pager

number. Phone numbers are displayed only on LCD

keypads.

# 6 Display/Toggle Chime Mode All keypads Allows you to change the status of the chime function.

# 7 Display Current Time LCD only Allows you to view the current system time.

# 8 User Page Toggle All keypads Allows you to turn the pager mode on or off. Keypad

displays the current system status.

Introduction

– 5 –

Introduction

Congratulations on your decision to protect your home or business

with the OMNI-408 security system. You have chosen a reliable,

state-of-the-art security system that is remarkably easy to operate.

Representatives from your local security company, who can explain

the specifics of your system, have professionally installed your system.

The keypad is the input and display device for your security system.

Your system can use either the OMNI-KP, OMNI-LCD or OMNI-LED

keypads. The OMNI-KP keypad displays the system status with fixed

words, the OMNI-LCD keypad displays two lines of text, and the

OMNI-LED keypad displays the current zone status, including

alarms, bypasses, and faults, using LEDs. Each condition causes the

LEDs to operate differently.

Throughout this guide, the following conventions are used to display

the keystrokes required to perform functions.

BYPASS Key labeled [BYPASS]

INSTANT Key labeled [INSTANT]

STAY Key labeled [STAY]

CODE Key labeled [CODE]

Enter your four-digit User Code.

Please keep your guide in a convenient location so you can refer to it if

needed.

System Reference

– 6 –

System Reference

ZONE DESCRIPTION

ENTRY

TIME 1 DOOR EXIT

TIME*

ENTRY

TIME 2 DOOR

* Exit time is the same for all designated entry/exit doors.

The following SEND HELP ALERTS can be programmed into your

system. Both keys must be pressed at the same time to activate the

alert. The keys you press depend on which type of keypad you have.

Your installer will show you how to activate these emergency keys.

DESCRIPTION KEYS

[#] and [*]

[7] and [9]

[1] and [3]

See page 7 of this User Guide for pictures of the OMNI-KP, OMNI-LCD,

and OMNI-LED keypads.

System Reference (cont’d)

– 7 –

OMNI-KP KEYPAD

ARMED

READY

STAY

BYPASS

INSTANT

CODE

OMNI-LCD AND OMNI-LED KEYPADS

ARMED

READY

STAY

BYPASS

INSTANT

CODE

OMNI_LCD

OMNI-LCD Alpha Keypad

1 3

4 6

7 9

STAY INSTANT

BYPASS CODE

ARM

AC / LB

READY

STAY

INST

TX LB

RF. SPRV.

OMNI_LED

OMNI-LED Keypad

System Reference (cont’d)

– 8 –

USER ID ASSIGNED TO

1 (MASTER USER 1)

6 Duress**

* The Master User can add, change, or erase other User Codes.

** If enabled, this User Code will transmit a duress signal to the central station.

MONITORING STATION INFORMATION

Account No.

Telephone No.

System Operation

– 9 –

System Operation

You can turn the burglar portion of your security system on and off.

Before you can turn the system on, it must be “ready.” If you have a

protected door open, or if someone is moving in view of a motion

detector, the system will not display “READY.”

The system is ready if the READY LED is lit and the display shows:

LCD Keypad:

SYSTEM READY Fixed-Word Keypad:

READY LED lit

NOTE: If programmed by your installer, you may arm the system if a

delay or interior zone is faulted. However, faulted zones must be

restored before your exit time expires or an alarm or zone bypass will

result. Ask your installer if your system has this feature and, if so, if it

causes an alarm or zone bypass.

To Turn the System On and Leave

Enter your User Code.

The ARMED LED goes on and the display shows:

LCD Keypad:

ON: AWAY Fixed-Word Keypad:

ARMED LED lit

Exit through a door designated by your installer as an exit/entry door.

You must leave within the exit time programmed by your installer.

Refer to the reference sheet for the time that has been set for your

system.

System Operation (cont’d)

– 10 –

When the System is Not Ready

If the system is not ready to be armed, the READY LED is off and the

display indicates which zone or zones are not ready.

Determine which zone or zones are not ready, resolve the problem,

and turn the system on normally. If the problem cannot be resolved,

you may bypass the zone that is not ready. Bypassing should only be

done if the problem on the zone cannot be resolved, OR if you

intentionally wish to leave the zone off. For example, you would leave

the zone off if you plan to keep the window open for ventilation. Zones

that are bypassed are not protected when the system is on. Refer to

the paragraph entitled, “To Bypass a Zone” for a description of the

procedure.

To Turn the System On and Stay Inside

To turn the perimeter portion of your burglar alarm on and move

around freely inside the premises, use the STAY mode.

Check to make sure the system is ready. When it is ready, press:

STAY followed by your User Code.

When the system has been turned on successfully, the ARMED LED is

on, and the following is displayed:

LCD Keypad:

ON: STAY Fixed-Word Keypad:

STAY

REMEMBER: You must turn the system off if you want to open the

door or leave the premises after the exit time has passed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere FBII Sicherheitssystem Handbücher

FBII

FBII LEGEND SERIES Bedienungsanleitung

FBII

FBII XL-2T Montageanleitung

FBII

FBII XL-2 Gold Bedienungsanleitung

FBII

FBII Star XL4800 EZ Bedienungsanleitung

FBII

FBII Star XL4800EZ Bedienungsanleitung

FBII

FBII OMNI-848EU Bedienungsanleitung

FBII

FBII XL-1218R Bedienungsanleitung

FBII

FBII XL4600DL Bedienungsanleitung

FBII

FBII OMNI-400 EU Montageanleitung

FBII

FBII OMNI-624EU Bedienungsanleitung

FBII

FBII XL-21 Bedienungsanleitung

FBII

FBII XL Star 4500 Bedienungsanleitung

FBII

FBII Star XL4800 EZ Bedienungsanleitung

FBII

FBII XL-2S Silver Bedienungsanleitung

FBII

FBII XL-21 Bedienungsanleitung

FBII

FBII XL-21 Bedienungsanleitung

FBII

FBII XL-2T Montageanleitung

FBII

FBII OMNI-600EU Bedienungsanleitung

FBII

FBII XL-2T Bedienungsanleitung

FBII

FBII XL-2P Bedienungsanleitung

FBII

FBII XL-5 Bedienungsanleitung

FBII

FBII XL-2T Montageanleitung

FBII

FBII XL-2 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung