FBII XL4600DL Bedienungsanleitung

XL4600DL

NOTE: Owners manual not to be

removed by anyone but the occupant.

Owners Manual

AN FBX COMPANY 100

Engineers

Road, Hauppauge, New York 11788

NEW YORK OUT OF STATE

(516) 582-6161 = (800) MS-5430 125246190

01990, FBX

’ KEYPAD LAYOUT

The keypad is the arming station for the STAR XL46OODL. Three different versions

are available, a metal plate flush mounted version (XL4600RM), a plastic cased

surface mount version, and an LCD (liquid crystal display) version containing a two line !

readout. The keypads have the following appearance and contain the following Hems; i

XL 4600 RP

Keypad

‘ -

L -

1) ZONE STATUS INDICATORS - displays the current zone status as follows;

ALARM Fast blinking.

BYPASS Slow blinking low intensity.

TROUBLE Slow pulse

NOT READY Solid ON

2) ARM/DISARM INDICATOR -Shows whether the system is currently armed (ON) or

disarmed (OFF).

3) STAY- shows the system has been armed with the interior zones bypassed.

4) INSTANT - shows whether the system has been ARMED with all delay zones

instant.

5) AC/LOW BATTERY - shows whether the system is running on AC (ON) or backup

battery (OFF).

6) READY Indicates whether the system is ready for arming.

7) NUMERICAL KEYPAD operates in a similar manner to a calculator or telephone

with the digits 0 - 9 and

# clearly marked.

6) DISPLAY AREA- This section of the LCD keypad displays the current system status

in this two line by sixteen character display. The second line of this display can be

programmed by your installer to contain customized descriptors for the areas of

protection within your location.

Throughout this users manual the following conventions are used to display the

keystrokes required to perform the functions.

BYPASS Key labeled BYPASS on keypad.

INSTANT Key labeled INSTANT on keypad.

STAY Key labeled STAY on keypad.

CODE Key labeled CODE on keypad

[USER] Four digit user code.

2. ARMING THE SYSTEM

ARMING the system will activate all portions of your Security System. Arming can

only be performed if all zones are READY. For example, if a protected door is open the

system cannot be armed.

SYSTEM READY

The system is ready to be armed if the READY indicator light ON.

On LCD keypads the following display will appear:

BYSTEYREADY ‘.

If the system is ready, ARMING can be performed as follows;

ARMNG PROCEDURE:

1. Enter your four digit user code into the keypad:

IUSEW

The ARMED indicator light will now be lit and if you are leaving the home you may

exit through a door designated by your installer as an exit/entry zone for a fixed time

period known as the exit delay.

The entry exit times for your system are as follows;

ENTRY: seconds- EXIT: seconds ‘C /

LCD keypads will display the following message;

f3my

NOTE: The system can be armed without the backup battery being connected.

SYSTEM NOT READY

If the system is not ready to be armed the READY indicator will be OFF. On LED

based keypads the zone indicator lights will display the zones which are currently not

ready. The condition of each zone indicator reflects what the status of each zone as

follows; ALARM Fast blinking.

BYPASS Slow blinking low intensity.

TROUBLE Slow pulse

NOT READY Solid ON

The LCD keypad a display will appear indicating that the system Is not ready followed

by displays showing the zone number and description of the zone or zones which are

not ready. For example:

PYSTEMNOTREADYl

In this example, the front door is not ready (Zone 1).

In order to make the system ready determine which zones are not ready by observing

the zone indicator lights, or the display section of the LCD keypad. From the zone

number you can find out which area of protection is not ready.

For example, assume the zone 1 is not ready. Typically this might mean thp?

protected door or window is open. \ ,

Once the problems with each zone has been resolved the READY light will

appear and the system can be armed.

To ARM the system when the system is NOT READY one of the following actions

are necessary;

- Make the zone(s) ready. Determine which zones are not ready and perform what

is necessary to ready the zone(s) (example, close the door or window, etc.),or

- Bypass the zone(s) not ready. Bypassing should only be performed if the zone

cannot be made ready or intentionally will remain not ready. Remember, zones that

are bypassed are not protected when the system is armed.

DISARMING

Disarming the security system will deactivate the burglary portions of the system.

This procedure can also be used to reset your system if you acddentally set off the

system ( example, opened a window while the system was armed, or excessive

amount of smoke activated fire protection system).

DISARM PROCEDURE:

[USER]

Enter your user code.

IF NO ALARMS HAVE TAKEN PLACE

Upon disarming the ARMING indicator will go off.

The system display will reflect the current status. LCD keypads should display the

SYSTEM READY display.

IF ALARMS HAVE TAKEN PLACE

If alarms or other conditions such as system troubles have taken place since the

initial system arming, they will appear on the display. The conditions that have occurred

appear in the zone display section of the keypad. LCD keypads will reflect the current

system status through the indicator lights as follows;

ALARM Fast blinking.

BYPASS Slow blinking low intensity.

TROUBLE Slow pulse

NOT READY Solid ON

Burglary alarms will be indicated with a STEADY sound through the keypad while

FIRE alarms will generate a pulsing sound.

LCD keypads will show the alarm conditions with a display as follows:

fiELzy

This display shows the zones in alarm. After entry of your four digit user code the

following display will appear:

-1

If an Intrusion has taken place while you were ayay, do not enter until the location

has been securedlll.

To clear the display of the alarm or trouble conditions and silence the

audible signal enter

[USER]

again.

4. STAY

The STAY mode is another way to ARM your system while you remain in the

location. The STAY mode will deactivate any interior protection zones which means

that you will be free to walk throughout your location without activating the alarm

system.

In order to enter the STAY mode, the system must be READY. (see previous

description).

STAY PROCEDURE:

STAY [USEQ

Depress the STAY key followed by your user code.

After a successful STAY arming the ARMED indicator will be lit. In addition, on LED

keypads the STAY indicator will be lit.

In LCD keypads the following display will appear;

pi51

In the STAY mode only themeter burglary protection is active. You are

free to walk around the residence without activating any of the interior protection zones.

Remember, you must DISARM the system to when you want to leave the

premise.

Note: The STAY option will automatically be reset after the system is disarmed.

5. INSTANT

The INSTANT mode arms the system and eliminates the entry time delay interval.

This mode could be used if anyone enters through an entry/exit zone the alarm system

will instantly activate.

The system must be ready to select the INSTANT option.

INSTANT PROCEDURE:

INSTANT [USER] ” i

Depress the INSTANT key followed by your user code.

Upon successful INSTANT ARMING of the system the ARMED Indicator will be lit.

In addition, on LED keypads the Instant indicator will be ON.

LCD keypads will contain the following message;

Note: The INSTANT option will automatically be reset after the system Is disarmed.

INSTANT - STAY

The INSTANT STAY mode will arm the system with the characteristics of both the

INSTANT and STAY modes. The system will be armed with the interior portions

bypassed and the entry delay will be suspended.

The system must be READY in order to enter this mode.

PROCEDURE:

INSTANT-STAY [USER]

STAY kSTANT [USER]

Depress the INSTANT and STAY keys in any order followed by your user code.

After a successful INSTANT STAY arming the ARMED indicator will be, lit. In

addition, on LED keypads both the INSTANT and STAY lights will be on.

LCD keypads will contain the following message;

ymsy 1

BYPASS . !T

Bypasses are performed to eliminate burglary zones that are not ready or fab., ’

from activating the security system. .

BYPASS PROCEDURE:

BYPASS [USER] ZN

Depress the BYPASS key followed by your user code and zone number (4-6) to be

bypassed.

Example: BY PASS [USER] 2 Will bypass zone 2.

Ifthe zone has already been bypassed, the sequence will unbypass the zone except

if the system is armed and the unbypassed zone is still not ready. Unbypass means

that the zone returns as an active burglary zone.

After the bypass (or unbypass) command has been accepted the unit will emit a

continuous beep and zone or zones that have been bypassed will appear In a slow

blinking mode In the zone status area on LED keypads.

LCD keypads will display the zone bypasses as a secondary display after the

SYSTEM READY or SYSTEM NOT READY as shown below:

If multiple zones are bypassed then more than one display will appear.

8. UNBYPASS

The UNBYPASS function removes an existing bypass from a currently bypassed

zone. After UNBYPASSING a zone, the bypass indication will be removed for that zone

on either the LCD or LED keypad.

The procedure is similar to a bypass.

UNBYPASS PROCEDURE:

BYPASS [USER] ZN

See bypass description.

9. USER DEFINITION

Users can be entered or modified directly through the keypad. The STAR

XL-4600DL security system can have up to six different users. User #I is known as the

master user and is the only user allowed to modify other users.

USER DEANITION PROCEDURE:

CODE [USER] [US#l [USERID]

where:

t::7 Is the master user code ( four digits).

User number (I-6)’

[USID] New user ID (0000 - 9999).

Note: (‘) If ambush code capability has been enabled by your installing company then

user #6 will be used as the system ambush code. lf an arming only code (maid code)

has been defined by your installer then user #5 can only arm the system.

Example,

To create user number 3, with a user access code of 4567 enter;

CODE [USER] 3 4567

Any error detected during the USER definition process will cause the

keypad to beep rapidly four times. If an error is detected retry the entlre

command.

10. USEd DELETION

Removal of users from the panel can be performed as follows;

USER DELETION PROCEDURE:

CODE [USER] [User #1*

Where:

[USER] Master user code

[User #] Represents the user number being deleted.(2-6). Note: User number 1 cannot

be deleted.

. is the

key from the keypad.

11. KEYPAD EMERGENCY CONDITIONS

The XL4600DL can also initiate three separate emergency conditions directly

through the keypad. These conditions must be activated by your installer and can be

initlated through simultaneous depression of two keys as follows:

TION KEYSTOW

Panic

l #

Fire 79 .’

Aux.

1 3

For example, to initiate a keypad panic signal press the

and # keys at the same time.

Consult with your alarm installer to determine the operation of these conditions within

your system.

12.

DURESS

The STAR XL-4600DL system has capability to send an emergency signal to the

Central Station if you are forced to enter the premise. This ambush capability can be

programmed by your installer. lf active, then user code #6 will be your ambush code,?

13.

ARM-ONLY (MAID) CODE k/

Another option selectable by your installer is an arm only code. lf selected then user

code #5 can only arm the system. This could be useful for a maid or maintenance

worker to allow them to activate the security system as they leave.

14.

QUICK ARMING

Another optlon selectable by your installer is a QUICK ARMING feature. If this

feature has been selected then.depression of the # key followed by 1 will ARM the

system without need for entry of a user code. NOTE: System disarming will still require

entry of a valid user code.

15. QUICK FORCED ARMING

Another optlon selectable by your installer is a QUICK FORCED ARMING feature.

If this feature has been selected then depression of the # key followed by 2 will ARM

the system without need for entry of a user code and will bypass any burglary zones

that are not ready. NOTE: System disarming will still require entry of a valid user code.

14.

INSTALLATION LAYOUT

Early warning fire detection is best achieved by the lnstallatlon of fire detection

equipment the location as follows:

Typical Smoke Detector Layout

~Pmposed)

Preparation of an evacuation plan is of prime importance in fire prevention. Establish

a household emergency evacuation plan in the event of fire.

1- Evaluate possible escape routes from your home.

2- Select 2 escape routes from each room.

3- Rooms on the second floor should have a rope ladder. Be sure it will reach the

ground.

4- Draw a rough sketch of your escape plan so everyone is familiar with it.

5 Practice your escape plan to assure that everyone knows what to do.

6- Establish a meeting place outside where your family is to report. Once you have

evacuated the house do not return to a burning house. i

7- Advise the local fire authority that you have installed a fire alarm system.

8. When the fire alarm signals, LEAVE IMMEDIATELY. Do not stop for belongings.

9. If a fire occurs Jest the door. lf hot, use your alternate route. Ifthe door Iscool, brace

your shoulder against it and open it cautiously. Shut the door to help prevent the fire

and smoke from spreading. Crawl through smoke, holding your breath.

IO. Contact the Fire Department from a neighbor’s telephone.

11 Everyone including neighbors should be familiar with the Fire and Burglary signals.

In this installation the Fire Alarm signal Is The Burglary Alarm signal Is

15. SYSTEM TESTING

This control unit was manufactured under rigid quality standards and complies with all

UL requirements for its intended use. Maintenance is best performed by your installing

company with trained service personnel.

Installing Company:

Telephone Number:

It is recommended that you test your system once a week using the following

procedure:

Note: If your XL4600DL system is monitored by a Central Station then contact them

prior to performing this test.

1- Arm your security system.

2- Activate the system by opening a protected zone (example, window, or door).

3- Confirm that the alarm sounding device (bell or siren) activates. ff your system is

connected to a Central Station then the keypad will emit a ringback sound to confirm

that the signal was received.

4- Disarm the system to silence the system and return to normal status.

BATTERY TEST 0

In order to test the backup battery the following procedure should be performed;

1- Remove the AC transformer from the AC outlet by removing the restraining screw

which secures the transformer to the wall. (Note: the screw is not present in models

sold In Canada).

2- Observe that the AC light goes off on the keypad.

3- Activate your alarm system using steps 14 listed above.

4- Replace the AC transformer to the AC outlet and secure using the retaining screw

(Note: The retaining screw is not present in models sold in Canada).

The National Fire Protection Association publishes a standard for household fire

warning equipment. N.F.P.A. #74. Further Information can be obtained by contacting;

NFPA Public Affairs Dept., Satterymarch Park, Quincy,MA 02269.

If you have any further questions about the operation of your system, call your

Installer.

Andere Handbücher für XL4600DL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere FBII Sicherheitssystem Handbücher

FBII

FBII XL-4 Montageanleitung

FBII

FBII Star XL4800EZ Bedienungsanleitung

FBII

FBII XL4600DL Bedienungsanleitung

FBII

FBII XL-2T Montageanleitung

FBII

FBII XL-21 Bedienungsanleitung

FBII

FBII XL-1218R Bedienungsanleitung

FBII

FBII XL4600RM Bedienungsanleitung

FBII

FBII XL-21 Bedienungsanleitung

FBII

FBII XL-2 Gold Bedienungsanleitung

FBII

FBII XL-2P Bedienungsanleitung

FBII

FBII XL-5 Bedienungsanleitung

FBII

FBII OMNI-848 Bedienungsanleitung

FBII

FBII XL-20 Bedienungsanleitung

FBII

FBII OMNI-400 EU Montageanleitung

FBII

FBII XL-2 Bedienungsanleitung

FBII

FBII Star XL4800 EZ Bedienungsanleitung

FBII

FBII Omni-408A Bedienungsanleitung

FBII

FBII XL-1 Bedienungsanleitung

FBII

FBII XL-2T Montageanleitung

FBII

FBII LEGEND SERIES Bedienungsanleitung

FBII

FBII OMNI-408EU Bedienungsanleitung

FBII

FBII Star XL4800 EZ Bedienungsanleitung

FBII

FBII XL-21 Bedienungsanleitung

FBII

FBII OMNI-600EU Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung

Pego

Pego ECP APE03 Bedienungsanleitung