Festo CPX-FB6 Bedienungsanleitung

Brief description

CPX field bus

node

type CPX-FB6

– English

8101668

2018-11a

[8101670]

CPX-Terminal

Festo CPX-FB6 2018-11a2

Translation of the original instructions

Documentation on the product

For all available product documentation

èwww.festo.com/pk

Festo AG & Co.

Ruiter Straße 82

73734 Esslingen

Germany

Internet: http://www.festo.com

E-Mail: service_international@festo.com

Reproduction, distribution or sale of this document or communication of

its contents to others without express authorization is prohibited.

a patent, utility model or design patent is registered.

English 3............................................

Festo CPX-FB6 2018-11a English 3

1 User instructionsEnglish

The field bus node CPX-FB6 for CPX terminals is intended

exclusively for use as a slave on the Interbus.

The maximum values specified in the section “Technical

specifications” must be observed here. Detailed informa

tion can be found in the manual for the field bus node

P.BE-CPX-FB6-.. as well as in the CPX system manual

P.BE-CPX-SYS-.. .

Warning

SSwitch off the power supply before connecting or

disconnecting plugs (otherwise this could lead to

functional damage).

SUse only power units which guarantee reliable

isolation of the operating voltages as per IEC 742/

EN60742/VDE 0551 with at least 4 kV isolation resis

tance (Protected Extra Low Voltage PELV). Switch

power packs are permitted, providing they guarantee

reliable isolation in accordance with EN 60950/

VDE 0805.

SConnect an earth conductor of sufficient cross-sec

tional area to the connection on the CPX terminal

marked with the earth symbol.

SThe CPX field bus node contains electrostatically

sensitive components. Do not therefore touch any

contacts. Observe the regulations for handling elec

trostatically sensitive components.

Please note

Commission only a CPX terminal which has been fitted

and wired completely.

Festo CPX-FB6 2018-11a English

2 Connecting and display elements

1Bus status and

CPX-specific LEDs

2DIL switches 1 to 4

(from left to right)

3Field bus connection

OUT (continuing,

9-pin sub-D socket)

4Field bus connection

IN (incoming, 9-pin

sub-D socket)

5Service interface for

handheld, etc.

RD M

12 12

ON ON

12 12

ON ON

Bus status LEDs CPX-specific LEDs

UL V load (green) PS Power system (green)

RC Remote bus check (green) PL Power load (green)

BA Bus active (green) SF System failure (red)

RD Remote bus disable

(yellow)

MModify (yellow – Parame

trizing modified or Force

active)

TR Transmit/Receive (yellow)

In normal operating status all green LEDs light up; the yellow and red

LEDs do not light up.

Without a field bus connection the LEDs UL, RD, PS and PL light up.

Festo CPX-FB6 2018-11a English 5

3 Installation instructions

3.1 Fitting

Field bus node CPX-FB6 is mounted in a manifold sub-base

of the CPX terminal.

1Screws, tightening

torque 0.9...1.1 Nm

2Field bus node

CPX-FB6

3Contact rails

4Manifold sub-base

Dismantling

SRemove the screws and carefully lift up the field bus

node.

Fitting

1. Check the seal and sealing surfaces and refit the sub-

base.

2. Place the screws so that the self-cutting threads are

used. Tighten the screws by hand in diagonally oppo

site sequence. Tightening torque 0.9...1.1 Nm.

Festo CPX-FB6 2018-11a English

3.2 DIL switch setting

Switches Setting Function 1)

1.1 1.1 = OFF Operating mode Remote I/O 2)

1.1 = ON Reserved 2)

1.2 1.2 = OFF Without PCP channel 2)

1.2 = ON With PCP channel

2.1 2.1 = OFF Register all faults 2)

2.1 = ON Filter error messages

2.2 2.2 = OFF Baud rate 500 kBd 2)

2.2 = ON Baud rate 2 MBd

3.1 / 3.2 3.1 = OFF

3.2 = OFF

Reserved 2)

4.1 / 4.2 4.1 = OFF

4.2 = OFF

System diagnosis switched off 2)

4.1 = OFF

4.2 = ON

Status bits

4.1 = ON

4.2 = OFF

I/O diagnostic interface

4.1 = ON

4.2 = ON

Reserved

1) Only valid if switch 1.1 = OFF

2) Factory setting

Festo CPX-FB6 2018-11a English 7

3.3 Pin assignment of bus interface

Field bus incoming Bus connection continuing

Plugs Pin Signal Socket Pin Signal

Housing

DO1

DI1

GND

n.c.

/DO1

/DI1

n.c.

Screening/

shield 2)

Housing

DO2

DI2

GND

n.c.

+5 V 1)

/DO2

/DI2

n.c.

RBST 1)

Screening/

shield 3)

1) Protocol chip SUPI3-OPC guarantees automatic recognition as to

whether further Interbus slaves are connected. A bridge between

pins 5 and 9 is not therefore necessary.

2) The incoming interface is electrically isolated from the CPX periph

ery. The plug housing is connected to the FE of the CPX terminal by

means of an R/C combination.

3) The plug housing is connected to the FE of the CPX terminal.

Sub-D plug and socket from Festo:

Connection Plug/socket type

Incoming bus interface FBS-SUB-9-BU-IB

Continuing bus interface FBS-SUB-9-GS-IB

Festo CPX-FB6 2018-11a English

3.4 Power supply for the CPX terminal

The operating and load voltage supplies for the CPX ter

minal are provided via manifold sub-bases. These transmit

the operating and load voltages to the neighbouring mod

ules.

Example with CPX-GE-EV-Z:

12 34

24 V 0 V FE24 V

234

0 V FE24 V

n.c.

123 4

24 V VAL

0 V VAL

24 V EL/SEN

0 V EL/SEN

24 V OUT

0 V OUT

24 V OUT

0 V OUT

1Manifold sub-base with system

supply type CPX-GE-EV-S

2Manifold sub-base without

supply type CPX-GE-EV

3Manifold sub-base with addi

tional supply type CPX-GE-EV-Z

(pin 1 not assigned)

4Load voltage for valves

5Operating voltage for the

electronics and sensors

6Load voltage for digital

outputs

7Functional earth (FE)

Festo CPX-FB6 2018-11a English 9

System supply

and additional

supply

Pin assignment

Type

CPX-GE-EV-S

Type

CPX-GE-EV-...

11. Operating volt

age supply for

electronics and

sensors (VEL/SEN)

2. Load voltage for

valves and out

puts (VVAL/VOUT)

3. 0V

4. Earth/ground

connection

1. Not connected

2. Load voltage

3. 0V

4. Earth/ground

connection

Festo CPX-FB6 2018-11a English

Connection example

The following diagram shows as an example the connec

tion with system supply and additional supply for electric

outputs.

ÎÎ

ACDC

PE PE

31 24

3124

8DI 4DO 4DO

4DO 4DO

2345 6

2 4

1Potential equalization

2External fuses

3The load voltage of the valves/

outputs can be switched off

separately

4Earth connection pin 4 is designed

for 16 A

5Connection for

system supply type

CPX-GE-EV-S

6Connection of

additional supply for

electric outputs type

CPX-GE-EV-Z

Andere Handbücher für CPX-FB6

Inhaltsverzeichnis

Andere Festo Industrieanlagen Handbücher

Festo

Festo DMES Series Bedienungsanleitung

Festo

Festo HGPP A Series Bedienungsanleitung

Festo

Festo DHRS Bedienungsanleitung

Festo

Festo VABB-P3-1 Bedienungsanleitung

Festo

Festo Distributing Station Bedienungsanleitung

Festo

Festo EADC-E12 Bedienungsanleitung

Festo

Festo DSNU-8 Bedienungsanleitung

Festo

Festo HGPPI Series Bedienungsanleitung

Festo

Festo DHTG-***-P4 Bedienungsanleitung

Festo

Festo DFST Series Bedienungsanleitung

Festo

Festo KSK Series Bedienungsanleitung

Festo

Festo ELFA-RF Bedienungsanleitung

Festo

Festo CPX-AP-I-4IOL-M12 Bedienungsanleitung

Festo

Festo EGC Series Bedienungsanleitung

Festo

Festo HGPT-...-B Series Bedienungsanleitung

Festo

Festo MPS Station Bedienungsanleitung

Festo

Festo MPS PA Bedienungsanleitung

Festo

Festo EAMM-A-T42-55A Bedienungsanleitung

Festo

Festo FBS-SUB-9-GS-IB-B Bedienungsanleitung

Festo

Festo DGSL Bedienungsanleitung

Festo

Festo DGE ZR-RF Series Bedienungsanleitung

Festo

Festo MPS 8059892 Service-Handbuch

Festo

Festo MS9-EX2 Series Bedienungsanleitung

Festo

Festo DHTG-A Series Einrichtungshandbuch

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung