Festo CPX-FB23 Bedienungsanleitung

Electronics manual

CPX field bus node

Type CPX−FB23

Field bus protocol:

CC−Link

CPX terminal

Manual

526 404

en 0308NH

[653 638]

Contents and general instructions

Festo P.BE−CPX−FB23−EN en 0308NH

Author P. Mauch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Editor M. Holder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Original de. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Translation transline Deutschland. . . . . . . . . . . . . . . . . . . . .

Layout Festo AG & Co. KG, Dept. KG−GD. . . . . . . . . . . . . . . .

Type setting KI−DT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Edition en 0308NH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Designation P.BE−CPX−FB23−EN. . . . . . . . . . . . . . . . . . . . . . .

Order no. 526 404. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

E(Festo AG & Co. KG, D73726 Esslingen, Federal Republic of

Germany, 2003)

Internet: http://www.festo.com

E−Mail: service_international@festo.com

The copying, distribution and utilization of this document as

well as the communication of its contents to others without

expressed authorization is prohibited. Offenders will be

in particular the right to carry out patent, utility model or

ornamental design registrations.

Contents and general instructions

II Festo P.BE−CPX−FB23−EN en 0308NH

Contents and general instructions

III

Festo P.BE−CPX−FB23−EN en 0308NH

Contents

Designated use V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Target group V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Service V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Notes on the use of this manual VI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Important user instructions VII. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Notes on the use of this manual IX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Installation 1−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1 General instructions on installation 1−4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Settings on the CPX field bus node 1−7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2.1 Removing/fitting the DIL switch cover 1−7. . . . . . . . . . . . . . . . . . . . . . .

1.2.2 Setting the DIL switches 1−8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3 Connecting the field bus 1−19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3.1 Field bus cable 1−19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3.2 Field bus baud rate and field bus length 1−21. . . . . . . . . . . . . . . . . . . . .

1.3.3 Pin assignment of field bus interface 1−23. . . . . . . . . . . . . . . . . . . . . . . .

1.3.4 Connecting the field bus 1−24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3.5 Bus termination with terminating resistors 1−28. . . . . . . . . . . . . . . . . . .

1.4 Pin assignment for power supply 1−29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. Commissioning 2−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1 Configuration and addressing 2−4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.1 Number of inputs/outputs 2−4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.2 Addressing rules 2−8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.3 Number of assigned stations 2−10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.4 Addressing examples (examples of address assignment) 2−11. . . . . . .

2.1.5 Address assignment after extension/conversion 2−21. . . . . . . . . . . . . .

2.1.6 CC−Link memory mapping 2−23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1.7 Bus configuration and addressing 2−28. . . . . . . . . . . . . . . . . . . . . . . . . .

2.2 Parametrizing 2−35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents and general instructions

IV Festo P.BE−CPX−FB23−EN en 0308NH

2.3 Commissioning the CPX terminal on the field bus 2−38. . . . . . . . . . . . . . . . . . . . .

2.3.1 HOLD/CLEAR and Fail safe 2−39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.3.2 RUN/PAUSE and STOP of the master 2−40. . . . . . . . . . . . . . . . . . . . . . . .

2.3.3 RAS function 2−41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. Diagnosis and error treatment 3−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Overview of diagnostic possibilities 3−4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Fault messages of the field bus node CPX−FB23 3−5. . . . . . . . . . . . . . . . . . . . . .

3.3 Diagnosis via LEDs 3−6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.1 Normal operating status 3−7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.2 CPX−specific LEDs 3−8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.3 CC−Link−specific LEDs 3−11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.4 Possible operating states of the CPX LEDs 3−13. . . . . . . . . . . . . . . . . . .

3.4 Diagnosis via CC−Link 3−14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.4.1 Status bits 3−14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.4.2 I/O diagnostic interface 3−16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.5 Fault treatment 3−17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B. Technical appendix A−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.1 Technical specifications of field bus node type CPX−FB23 A−3. . . . . . . . . . . . . . .

A.2 Accessories A−5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

A.3 Default parametrizing of the CPX terminal A−6. . . . . . . . . . . . . . . . . . . . . . . . . . .

C. Index B−1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B.1 Index B−3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents and general instructions

Festo P.BE−CPX−FB23−EN en 0308NH

Designated use

The field bus node type CPX−FB23 described in this manual

has been designed for use as a slave on the field bus system

Control & Communication Link (CC−Link) from Mitsubishi.

The CPX terminal may only be used as follows:

asintended in industrial installations.

 without any modifications by the user

Only the conversions or modifications described in the

documentation supplied with the product are permitted.

infaultless technical condition.

The maximum values specified for pressures, temperatures,

electrical data, torques, etc. must not be exceeded.

Observe also the standards specified in the relevant chapters,

as well as national and local laws and technical regulations.

Target group

This manual is intended exclusively for technicians trained in

control and automation technology who have experience in

installing, commissioning, programming and diagnosing

slaves on the field bus CC−Link.

Service

Please consult your local Festo repair service if you have any

technical problems.

Contents and general instructions

VI Festo P.BE−CPX−FB23−EN en 0308NH

Notes on the use of this manual

Please note

This manual refers to CPX field bus node type CPX−FB23 as

from software version 6.10 and hardware version 1.0.

This manual contains specific information on installing, com

missioning, programming and diagnosing with the CPX field

bus node for CC−Link.

General information on the field bus CC−Link can be found in

the documentation for your CC−Link master and the relevant

control systems (e.g. from Mitsubishi).

An overview can be found under www.cc−link.org.

General basic information on the functioning, fitting, installa

tion and commissioning of CPX terminals can be found in the

CPX system manual.

Information on further CPX modules can be found in the man

ual for the relevant module.

Contents and general instructions

VII

Festo P.BE−CPX−FB23−EN en 0308NH

Important user instructions

Danger categories

This manual contains instructions on the possible dangers

which may occur if the product is not used correctly. These

instructions are marked (Warning, Caution, etc.), printed on a

shaded background and marked additionally with a picto

gram. A distinction is made between the following danger

warnings:

Warning

This means that failure to observe this instruction may

result in serious personal injury or damage to property.

Caution

This means that failure to observe this instruction may

result in personal injury or damage to property.

Please note

This means that failure to observe this instruction may

result in damage to property.

The following pictogram marks passages in the text which

describe activities with electrostatically sensitive compo

nents.

Electrostatically sensitive components may be damaged if

they are not handled correctly.

Contents and general instructions

VIII Festo P.BE−CPX−FB23−EN en 0308NH

Marking special information

The following pictograms mark passages in the text contain

ing special information.

Pictograms

Information:

Recommendations, tips and references to other sources of

information.

Accessories:

Information on necessary or sensible accessories for the

Festo product.

Environment:

Information on environment−friendly use of Festo products.

Text markings

·The bullet indicates activities which may be carried out in

any order.

5. Figures denote activities which must be carried out in the

numerical order specified.

 Hyphens indicate general activities.

Andere Handbücher für CPX-FB23

Inhaltsverzeichnis

Andere Festo Touch-Terminal Handbücher

Festo

Festo CPA VI-MP Series Stücklistenhandbuch

Festo

Festo VTSA-F-CB Bedienungsanleitung

Festo

Festo VIFB-02- Series Bedienungsanleitung

Festo

Festo CPA10VI Bedienungsanleitung

Festo

Festo CPV GE-ASI-4E3A-Z Series Stücklistenhandbuch

Festo

Festo MPA-S Bedienungsanleitung

Festo

Festo CPV GE-ASI-8E8A-Z-M8-CE Series Stücklistenhandbuch

Festo

Festo CDSA-D3-RV Bedienungsanleitung

Festo

Festo CPX Series Bedienungsanleitung

Festo

Festo CPV-GE-DN3-8 Series Bedienungsanleitung

Festo

Festo MPA1-MP Series Bedienungsanleitung

Festo

Festo VABA-S6-1-AP Bedienungsanleitung

Festo

Festo CDVI-DN Bedienungs- und Montageanleitung

Festo

Festo CPX-FB36 Bedienungs- und Montageanleitung

Festo

Festo CPV -VI Series Bedienungsanleitung

Festo

Festo CPV GE-ASI-8E6A-Z Series Stücklistenhandbuch

Festo

Festo VTSA-F-CB Montageanleitung

Festo

Festo VTSA-ASI 4E4A-Z Series Stücklistenhandbuch

Festo

Festo CDSA-D3-RV Bedienungsanleitung

Festo

Festo CPX Series Bedienungsanleitung

Festo

Festo IFB-03 Series Bedienungsanleitung

Festo

Festo CPX Series Bedienungsanleitung

Festo

Festo CPV Series Stücklistenhandbuch

Festo

Festo CPX-FB6 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung