Festo CPX-FB33 Bedienungsanleitung

Description

Network protocol

PROFINET IO

548760

en 1407c

[8032733]

Terminal CPX

Bus node CPX-(M)-FB33/34/35

Contents and general safety instructions

Festo P.BE-CPX-PNIO-EN en 1407c English

Original de.......................................

Version en 1407c...................................

Designation P.BE-CPX-PNIO-EN.......................

Order no. 548760..................................

Internet: www.festo.com

E-mail: service_internationa[email protected]

Reproduction, distribution and utilisation of this document,

as well as the communication of its contents to others

without explicit authorisation, is prohibited. Offenders will

be liable for damages. All rights are reserved, in particular

the right to file patent, utility model or registered design

applications.

Contents and general safety instructions

Festo P.BE-CPX-PNIO-EN en 1407c English

PROFIBUS

, PROFIenergy

,PROFINETIO

, PROFIsafe

,SIMATIC

,TORX

,TÜV

and

VDE

are registered trademarks of the respective trademark owners in certain countries.

Contents and general safety instructions

III

Festo P.BE-CPX-PNIO-EN en 1407c English

Ta b l e o f c o n t e n t s

Intended use VII..........................................................

Target group IX..........................................................

Service IX...............................................................

Notes regarding this description X..........................................

Important user instructions XII..............................................

1. Installation 1-1...................................................

1.1 General instructions on installation 1-3................................

1.2 Electrical connection and display components 1-4.......................

1.3 Mounting and dismounting of the bus node 1-5.........................

1.4 Setting the DIL switches, use of the memory card 1-7.....................

1.4.1 Removing and attaching the cover for DIL switches

and memory card 1-7.......................................

1.4.2 Settingthe DIL switches 1-8...................................

1.4.3 Using the memory card 1-14...................................

1.5 Replacement of the bus node 1-15.....................................

1.6 Connecting to the network 1-17........................................

1.6.1 General information about PROFINET networks 1-17...............

1.6.2 Overview of connections, network connectors and cables 1-20.......

1.6.3 Network interface of the CPX-FB33 1-24.........................

1.6.4 Network interface of the CPX-M-FB34 1-25.......................

1.6.5 Network interface of the CPX-M-FB35 1-26.......................

1.7 Ensuring the protection class 1-27.....................................

1.8 Power supply 1-28..................................................

2. Commissioning 2-1................................................

2.1 General instructions 2-3.............................................

2.2 Address assignment 2-5.............................................

2.3 Addressing 2-16....................................................

2.3.1 Basic rules for addressing 2-16................................

2.3.2 Address assignment and addressing after expansion

or conversion 2-18...........................................

Contents and general safety instructions

Festo P.BE-CPX-PNIO-EN en 1407c English

2.4 Instructions for commissioning with Siemens SIMATIC STEP 7 2-19...........

2.5 Preparing for commissioning 2-21......................................

2.5.1 Import device master file (GSDML) and symbol files 2-21...........

2.5.2 Select GSDML file (compatibility table) 2-23......................

2.5.3 Setting up automation project 2-24.............................

2.5.4 Setting up the controller system (PLC/Master) 2-25................

2.5.5 Install GSDML file 2-27.......................................

2.6 Basic hardware configuration 2-28.....................................

2.6.1 Localise and identify CPX terminal in the network 2-28..............

2.6.2 Select CPX terminal (station selection) 2-30......................

2.6.3 Assign “Device Name” 2-33...................................

2.6.4 Set up Prioritized Start-up (“Fast Start-up”) 2-35..................

2.6.5 Assigning or changing IP address 2-39..........................

2.6.6 Use MAC addressing 2-42.....................................

2.6.7 Determine port addresses 2-42................................

2.7 CPX-terminal configuration 2-43.......................................

2.7.1 Allocate configuration table (insert bus nodes and modules) 2-43....

2.7.2 Modify I/O address 2-47......................................

2.7.3 Modify diagnostics address 2-47...............................

2.8 Parameterisation 2-49...............................................

2.8.1 Start parameterisation during switch-on (system start) 2-51.........

2.8.2 Parameterisation of the CPX terminal with Siemens STEP 7 2-52......

2.8.3 Parameterisation with the operator unit 2-56.....................

2.8.4 Parameterisation through the Festo Maintenance Tool 2-56..........

2.8.5 Bus node parameters 2-57....................................

2.8.6 Application example for the parameterisation 2-60................

2.9 Identification & Maintenance 2-61......................................

2.10 Configuration in the Remote Controller operating mode 2-64................

2.11 Checklist for commissioning the CPX terminal 2-66........................

Contents and general safety instructions

Festo P.BE-CPX-PNIO-EN en 1407c English

3. Diagnostics 3-1...................................................

3.1 Overview of Diagnostic Functions 3-3..................................

3.2 Diagnostics via LEDs 3-5............................................

3.2.1 Network status/network error – LED NF,

Maintenance/PROFIenergy – LED M/P,

connection status – LEDs TP1, TP2 3-7..........................

3.2.2 CPX terminal status – LEDs PS, PL, SF, M 3-9.....................

3.3 Diagnostics via status bits 3-12........................................

3.4 Diagnostics via the I/O diagnostic interface (STI) 3-13.....................

3.5 Diagnostics via PROFINET 3-14........................................

3.5.1 Basic information 3-14........................................

3.5.2 Online diagnostics with Siemens STEP 7 3-17.....................

3.5.3 User-specific diagnostics with Siemens STEP 7 3-19................

A. Technical appendix A-1.............................................

A.1 Technical data, bus node CPX-FB33 A-3................................

A.2 Technical data, bus node CPX-M-FB34 A-4..............................

A.3 Technical data, bus node CPX-M-FB35 A-5..............................

A.4 Network-specific technical data

bus node CPX-FB33, CPX-M-FB34 and CPX-M-FB35 A-6...................

B. Glossary B-1......................................................

B.1 Bus node operating modes B-3.......................................

B.1.1 Remote I/O operating mode B-3...............................

B.1.2 Remote Controller operating mode B-4.........................

B.1.3 Additional function “Prioritized Start-up” (“Fast Start-up”) B-5......

C. Index C-1.........................................................

Contents and general safety instructions

Festo P.BE-CPX-PNIO-EN en 1407c English

Contents and general safety instructions

VII

Festo P.BE-CPX-PNIO-EN en 1407c English

Intended use

The bus nodes documented in this description, CPX-FB33,

CPX-M-FB34 and CPX-M-FB35, are intended only for use as

participants (I/O device) on the Industrial Ethernet system

PROFINET IO.

The bus nodes can be used in three different operating

modes:

–RemoteI/O

– Remote controller

– Remote I/O with additional function “Prioritized Start-

up”, also designated “Fast Start-up” (FSU) or “Fast re-

start”.

“Fast Start-up” ensures a faster running up of the CPX termin-

al.

But this additional function has restrictions regarding com-

missioning and parameterisation Section B.1.3.

The CPX terminal must only be used as follows:

– as intended in industrial environments;

outside of industrial environments, e.g. in commercial and

mixed-residential areas, actions to suppress interference

may have to be taken

– exclusively in combination with modules and components

that are permissible for the respective product variant of

the CPX terminals www.festo.com/catalogue

– in original status without unauthorised modifications;

only the conversions or modifications described in the

documentation supplied with the product are permitted

– in perfect technical condition.

Contents and general safety instructions

VIII

Festo P.BE-CPX-PNIO-EN en 1407c English

The limit values specified for pressures, temperatures, elec-

trical data, torques etc. must be observed.

When connected with commercially available components,

such as sensors and actuators, the specified limits for pres-

sures, temperatures, electrical data, torques etc. must be

observed.

Comply with the legal rules and regulations and standards,

rules of the testing organisations and insurance companies

and national specifications applicable for the location.

Warning

Electric shock.

Injury to people, damage to the machine and system.

•

Use for the electrical power supply only PELV circuits in

accordance with IEC 60204-1 (Protective Extra-Low

Voltage, PELV).

•

Observe the general requirements in accordance with

IEC 60204-1 for PELV circuits.

•

Useonlyvoltagesourcesthatguaranteeareliableelec-

tric disconnection of operating and load voltage in ac-

cordance with IEC 60204-1.

•

Always connect the circuits for operating and load

voltage supplies U

EL/SEN

VAL

and U

OUT

Through the use of PELV circuits, protection against electric

shock (protection against direct and indirect contact) is en-

sured in accordance with IEC 60204-1.

Observe the measures in section 2.11 and section 3.1 when

implementing an emergency off or emergency stop function.

Andere Handbücher für CPX-FB33

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Festo Touch-Terminal Handbücher

Festo

Festo CPX-FB13 Bedienungsanleitung

Festo

Festo CPX-FB36 Bedienungs- und Montageanleitung

Festo

Festo CPV..-DI01 series Bedienungsanleitung

Festo

Festo VIFB13-02 Series Bedienungsanleitung

Festo

Festo CPV GE-ASI-8E6A-Z Series Stücklistenhandbuch

Festo

Festo CPV GE-ASI Series Stücklistenhandbuch

Festo

Festo VTOP Bedienungsanleitung

Festo

Festo CPV10-GE-IBL-8 Bedienungsanleitung

Festo

Festo CPX-FB32 Bedienungsanleitung

Festo

Festo CPX Benutzerhandbuch

Festo

Festo CPX Bedienungsanleitung

Festo

Festo CPV-GE-CC-8 Series Stücklistenhandbuch

Festo

Festo CPV-GE-ASI-8E6A-Z Series Stücklistenhandbuch

Festo

Festo CPV GE ASI-4 Series Stücklistenhandbuch

Festo

Festo CPX-MMI-1 Bedienungsanleitung

Festo

Festo FB13 Bedienungsanleitung

Festo

Festo VABA-S6-1-AP Bedienungsanleitung

Festo

Festo CPX-FB14 Bedienungsanleitung

Festo

Festo CPA VI-MP Series Stücklistenhandbuch

Festo

Festo CPV...-GE-CO3-8 series Bedienungsanleitung

Festo

Festo VTSA-F-CB Bedienungsanleitung

Festo

Festo CPV GE-IL Series Bedienungs- und Montageanleitung

Festo

Festo CPA10VI Bedienungsanleitung

Festo

Festo CPV -VI Series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung