FireAngel ST-620 Thermoptek Bedienungsanleitung

User Manual

SMOKE

ALARM

10 YEAR LIFE

ST-620

Please read me – as I could save your life.

INTRODUCTION

AUTOMATIC POWER ENGAGE

SENSOR TECHNOLOGY

APPLICATION

POSITIONING

LIMITATIONS

HOW TO INSTALL YOUR

SMOKE ALARM

1 Preparation

2 Install mounting plate

3 Fit your smoke alarm

4 Test your smoke alarm

OPERATION

Normal Condition

Low Power Pack Condition

ALARM TEST

ALARM SMART SILENCE™

ROUTINE MAINTENANCE

WHAT TO DO IN CASE OF

FIRE IN YOUR HOME

REPAIR

TROUBLESHOOTING

DISPOSAL

HOW TO MAKE YOUR HOME

SAFER

WARRANTY

RETURNS

PRODUCT RANGE

NOTES

CONTENTS

Note: This User Manual is also available in large text and other

formats. Please call 0800 141 2561 for further information

AUTOMATIC POWER

ENGAGE

Your 10 year life smoke alarm is powered

by an internal lithium power pack. To avoid

unnecessary use of the power pack prior to

installation, and to ease disposal when the

alarm reaches the end of its life, the alarm is

supplied with the power pack in a deactivated

state. The power pack is automatically

enabled when the alarm is fully locked on to

the mounting plate.

WARNING: This automatic power

engage system only applies to the

following 10 year smoke alarms:

ST-620

IMPORTANT: Your alarm will not work

until it is correctly located and secured

on the mounting plate.

INTRODUCTION

Congratulations! You’ve made a wise

investment in protecting your family and home.

The ST-620 multi-criteria high performance

detector is the ultimate alternative to traditional

alarms. Groundbreaking Thermoptek

technology combines the very latest in

optical sensing with thermal enhancement,

providing faster response to both ﬁre types

eliminating the need for ionisation sources

which can be harmful to the environment.

The FireAngel range of products is constantly

being improved and expanded. Please visit

www.ﬁreangel.co.uk to ﬁnd out about the

latest additions to our range of innovative

products.

IMPORTANT: This user manual

containsimportant information regarding

the operation of your FireAngel smoke alarm.

Ensure you read this user manual fully before

installing and operating the alarm. If you are

installing this smoke alarm for use by others,

you must leave this manual (or a copy of it)

with the end user.

SENSOR TECHNOLOGY

Traditionally 3 types of senor technology have

been used in domestic self contained ﬁre

alarms.

Optical smoke alarms are typically more

effective at detecting slow burning ﬁres,

which can smoulder for hours before bursting

into ﬂames.

Ionisation smoke alarms are generally more

effective at detecting fast, ﬂaming ﬁres which

consume combustible materials rapidly and

spread ﬁre quickly.

Heat alarms are triggered when room

temperature reaches a set point (typically

56°C) these alarms are generally used in

locations where other alarm types are not

suited.

THERMOPTEK SENSOR TECHNOLOGY

Thermoptek technology combines a state of

the art optical sensing chamber with thermal

enhancement so not only is the alarm effective

at detecting slow burning ﬁres, constant

monitoring of temperature changes enables the

sensitivity of the alarm to be instantly increased

thereby quickening the typical response time

to fast ﬂaming ﬁres signiﬁcantly.

APPLICATION

WARNING: Your FireAngel smoke

alarm can be installed into a new

build property as additional protection

to an existing smoke detection system

only. It cannot be used as a substitute for

a hard wired system as required in new

build properties. In this type of property

the building regulations require alarms

to be interlinked. You can obtain further

information from your local ﬁre service or

building control department at your local

council ofﬁces. These sources generally

provide advice on new builds or projects

that require planning permission.

Your smoke alarm typically meets the

minimum requirements for family living units

in existing buildings, as long as at least one

unit is installed on each ﬂoor/level of your

property.

In order to achieve the earliest ﬁre warning,

we recommend that a smoke alarm is ﬁtted in

all rooms where the temperature is normally

between 4°C (40°F) and 38°C (100°F).

Check the section on ‘Positioning’ to ensure

that the smoke alarm is to be correctly

positioned for the particular dwelling into

which it is intended to be installed.

WARNING: The alarm positions

shown below are based on typical

homes. Construction and layout of individual

dwellings will vary, so this should be

regarded only as a guide. Check with your

local ﬁre station for further guidance.

Multi-family or mixed occupant residence

(Tenancy building, student accommodation)

Your FireAngel smoke alarm can also be used

in individual ﬂats and bedsits, providing the

same conditions are met as for a single-family

residence. However, there must already be

a primary ﬁre detection system that meets

LOUNGE

CELLAR

BEDROOMBEDROOM HALL

DINING ROOM

MINIMUM RECOMMENDATIONS

EXISTING HOMES

NOTE: Kitchens should be covered by a

self contained heat detector.

RECOMMENDED FOR ADDITIONAL

PROTECTION

regulatory requirements for common areas

such as lobbies and hallways.

Institutions and Hotels

This includes motels, hospitals, day care

facilities, long-term health care facilities,

boarding houses and dormitories. Your

smoke alarm can be used in individual

sleeping/resident rooms, providing the same

conditions are met as for a single-family

residence. However, there must already be

a primary ﬁre detection system that meets

regulatory requirements for common areas

such as lobbies and hallways. Use of this

smoke alarm in common areas may not

provide sufﬁcient ﬁre warning to residents

or meet regulatory requirements. This smoke

alarm is designed to operate as a standalone

smoke alarm.

WARNING: This FireAngel smoke

alarm will not communicate with other

smoke alarms or ﬁre alarm systems. It is

not intended as a substitute for a complete

alarm system.

Mobile Homes and Caravans

This smoke alarm is suitable for use in mobile

homes and caravans.

Commercial and Industrial Premises

This smoke alarm is not intended for any

non-residential, commercial or industrial

application, nor for any other purpose than

described above.

POSITIONING

Thermoptek smoke alarms are less prone

to false alarms from cooking fumes, and

are therefore suitable for locations near

kitchens. However like other types of smoke

alarms, thermoptek smoke alarms can be

susceptible to nuisance alarms from steam

and should not be located too close to

bathrooms and showers.

It is recommended that your FireAngel

smoke alarm is NOT to be ﬁtted in the

following locations:

• Bathrooms, shower-rooms, and other very

damp or humid areas, where the moisture

can cause unwanted alarms.

• Kitchens. Kitchen areas should be

protected with self-contained Heat Alarms,

as the combustion particles from cooking

in kitchens will result in unwanted alarms

and permanent contamination of the smoke

alarm’s sensor.

• In areas where excessive dust or dirt could

contaminate the sensing chamber, making

it over sensitive or impairing smoke entry.

• In areas where the ambient temperature

is not controlled and may regularly drift

below 4°C (40°F) or above 38°C (100°F)

e.g. unheated buildings, open attic

spaces.

• Very dirty, dusty or greasy areas.

• In very draughty areas, such as close to

ceiling fans or fresh air vents. Draughts can

blow smoke away from the alarm.

• In insect infested areas. Insects can

clog openings to the sensing chamber,

preventing smoke entry or causing

unwanted alarms.

• Within 30cm (12”) of a uorescent light

ﬁtting which emits electrical ‘noise’ that can

prevent correct alarm operation.

• In wall positions that are more than 30cm

(12”) away from the ceiling (see ‘How to

install your smoke alarm’).

• In ‘dead air’ spaces (see following

diagram).

• Within 30cm (12”) of light ttings or other

ceiling based obstructions.

WARNING: Prolonged exposure to

temperatures outside those stated above

will reduce product life.

1 METRE

(3 FEET) DEAD

AIR SPACES

100MM

(4 INCHES)

100MM

(4 INCHES)

BEST LOCATION

(IN CENTRE OF CEILING)

DEAD

AIR SPACES

WHAT ARE THE

LIMITATIONS OF MY

SMOKE ALARM?

Your FireAngel smoke alarm is designed to

alert you by sounding an alarm when it senses

smoke, i.e. it can only sense smoke and alert

you if smoke reaches it! If a ﬁre develops in

an area remote from the location of the smoke

alarm, such as another room or another level,

smoke may not reach the smoke alarm in

sufﬁcient time or quantity to sense and alert

you to the danger.

We recommend that as a minimum you install

Thermoptek smoke alarms on every ﬂoor of

your property. For comprehensive coverage

a smoke alarm should also be ﬁtted in every

room.

This smoke alarm cannot be used to provide

primary ﬁre detection in common areas used

by different residents such as blocks of ﬂats

and hotels. The FireAngel smoke alarm may

not alarm before a ﬁre causes damage,

injury or death, as the smoke may not reach

the smoke alarm in time. Examples include

smoking in bed and violent gas explosions.

This smoke alarm may not respond in a

reasonable time if it is not installed in the best

position, or if furniture or other obstacles are

located between the smoke alarm and the

ﬁre.

WARNING: Your smoke alarm will not

operate without sufﬁcient power.

As the alarm’s power pack reaches the end

of its life a low power warning chirp will be

emitted every 45 seconds. When this occurs

you must replace the unit within 7 days.

IMPORTANT: Smoke alarms are

designed to alert you with an audible

alarm at a level speciﬁed by the European

Standard EN 14604: 2005. Closed doors,

walls and high ambient noise levels will

reduce this level. Temporary or permanently

impaired hearing may result in the alarm not

being heard. Stereos, trafﬁc and other loud

sources may also prevent the alarm being

heard. Heavy sleepers and residents under

the inﬂuence of alcohol or drugs may also

not hear or respond to the alarm. Test and

check that you can hear the alarm in all

circumstances. If in doubt install additional

smoke alarms as required.

WARNING: The Smoke alarm is not

suitable for alerting hearing impaired

residents. We recommend that specially

designed warning systems be installed that

will alert hearing impaired residents.

WARNING: The smoke alarm

accompanying this manual employs the

latest technology and is independently tested

as being compliant with all the relevant

European Standards. However, as with any

electronic product it may fail and may not

sense all types of ﬁre within sufﬁcient time to

alert you of the danger and provide adequate

timefor your escape. In orderto maximise your

level of safety always test your smoke alarm

frequently to ensure it is in full working order.

Your FireAngel smoke alarm is only suitable

for use in domestic/ residential applications

as covered in this manual. It is not suitable

for commercial or industrial applications.

It is designed to sense smoke and alert

you. It will not sense carbon monoxide,

ﬂames, or gas. It will not prevent or extinguish

ﬁres.

This FireAngel smoke alarm has a limited life

of 10 years and should not be considered as

a substitute for life or property insurance. Like

all electronic equipment, it can wear out or

fail. It should be tested weekly and replaced

immediately in the event of failure, and

replaced every 10 years regardless.

2 Install Mounting Plate

Fit the mounting plate to the ceiling or wall

using the screws provided.

3 Fit Your FireAngel Smoke Alarm

The alarm has a mechanism on the back

that activates the alarm when it is correctly

HOW TO INSTALL YOUR

SMOKE ALARM

IMPORTANT: Make sure you have

read and understood this manual before

installing your smoke alarm.

1 Preparation

The mounting plate should be attached to the

ceiling or wall.

Break out the tabs from the mounting plate.

Use the ﬁxing slots on the mounting plate as

a guide when marking the position of the drill

holes. With an appropriately sized drill, drill

the holes and insert the plastic ﬁxing anchors

supplied (if needed).

MP5

Mounting plate tabs Alarm Mounting Plate

MP5

Lugs (hooks)

Andere Handbücher für ST-620 Thermoptek

Inhaltsverzeichnis

Andere FireAngel Rauchmelder Handbücher

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

FireAngel

FireAngel EZ-212 Bedienungsanleitung

FireAngel

FireAngel THERMISTEK HT-630 Bedienungsanleitung

FireAngel

FireAngel SI-601 Bedienungsanleitung

FireAngel

FireAngel ST-630-INT Bedienungsanleitung

FireAngel

FireAngel SI-601 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-625 Bedienungsanleitung

FireAngel

FireAngel SI-610 Bedienungsanleitung

FireAngel

FireAngel Thermoptek WST-630 Bedienungsanleitung

FireAngel

FireAngel THERMOPTEK Wi-Safe 2 Bedienungsanleitung

FireAngel

FireAngel ST-620 Thermoptek Bedienungsanleitung

FireAngel

FireAngel Wi-Safe 2 Thermoptek WST-630-NEU Bedienungsanleitung

FireAngel

FireAngel LSI-601 Bedienungsanleitung

FireAngel

FireAngel Thermoptek WST-630 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

FireAngel

FireAngel SI-601 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-625 Bedienungsanleitung

FireAngel

FireAngel ST-625-INT Bedienungsanleitung

FireAngel

FireAngel P-LINE HT-630 Montage- und Bedienungsanleitung

FireAngel

FireAngel THERMISTEK HT-630 Bedienungsanleitung

FireAngel

FireAngel HW1 Bedienungsanleitung

FireAngel

FireAngel ST-623E-INT Bedienungsanleitung

FireAngel

FireAngel ST-750 Bedienungsanleitung

FireAngel

FireAngel THERMOPTEK ST-623E Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

LST

LST ÜMS-55000-841 Bedienungsanleitung

Radal Technology

Radal Technology Cig-Arrête CSA-POD Bedienungsanleitung