FireAngel SI-610 Bedienungsanleitung

SI-610 / SO-610 User

Manual

10 Year Smoke

Alarm

Standard / Toast Proof with Smart

Silence

INTRODUCTION 2

AUTOMATIC POWER ENGAGE 2

SENSOR TECHNOLOGY 3

APPLICATION 4

POSITIONING 7

LIMITATIONS 9

HOW TO INSTALL YOUR SMOKE

ALARM 11

1 Preparation

2 Install mounting plate

3 Fit your smoke alarm

4 Test your smoke alarm

OPERATION 14

Normal Condition

Low Power Pack Condition

ALARM TEST 15

ALARM SMART SILENCE™ 16

ROUTINE MAINTENANCE 19

WHAT TO DO IN CASE OF FIRE IN

YOUR HOME 20

REPAIR 21

TROUBLESHOOTING 22

DISPOSAL 25

HOW TO MAKE YOUR HOME SAFER 26

WARRANTY 28

RETURNS 29

PRODUCT RANGE 30

CONTENTS

AUTOMATIC POWER

ENGAGE

Your 10 year life smoke alarm is powered by

an internal lithium-ion power pack. To avoid

unnecessary use of the power pack prior to

installation, and to ease disposal when the alarm

reaches the end of its life, the alarm is supplied

with the power pack in a deactivated state. The

power pack is automatically enabled when the

alarm is correctly attached to the mounting plate.

WARNING: This automatic power

engage system only applies to the

following 10 year smoke alarms:

SI-610

SO-610

WSI-610

WSO-610

IMPORTANT: Your alarm will not

work until it is correctly located and

secured on the mounting plate.

INTRODUCTION

This user manual covers the following two

products, FireAngel SI-610 (Ionisation) Smoke

Alarm and SO-610 Toast Proof (Optical) Smoke

Alarm.

Congratulations! You’ve made a wise investment

in an innovative product and your personal

safety. The FireAngel smoke alarms covered by

this manual form part of a new generation of

domestic life safety products from FireAngel

Limited. The FireAngel range of products is

constantly being improved and expanded. Please

visit www.reangel.co.uk to nd out about the

latest additions to our product range.

IMPORTANT: This user manual

contains important information

regarding the operation of your FireAngel

smoke alarm. Ensure you read this user manual

fully before installing and operating the alarm.

If you are installing this smoke alarm for use by

others, you must leave this manual (or a copy

of it) with the end user.

SENSOR TECHNOLOGY

There are two main types of smoke alarm. The

SI-610 Standard Smoke Alarm uses an ionisation

type sensor to detect the presence of smoke.

Ionisation type smoke alarms are generally more

effective at detecting fast, aming res which

consume combustible materials rapidly and spread

re quickly.The SO-610 Toast Proof Smoke Alarm

uses an optical (photoelectric) type sensor which

is more effective at detecting slow burning res,

which can smoulder for hours before bursting into

ames.

TOAST PROOF = less sensitive to cooking

fumes. (Optical alarms are less prone to

nuisance alarms due to cooking fumes.)

For maximum protection, use both types of

smoke alarm on each level of your home

The mounting plate includes a small magnet as

illustrated below. Ensure the magnet is in position

prior to attaching the alarm. Your 10 year alarm

has been designed to prevent installation on a

mounting plate that has had the magnet removed.

Magnet (Silver

in colour)

APPLICATION

WARNING: Your FireAngel smoke

alarm can be installed into a new

build property as additional protection to

an existing smoke detection system only. It

cannot be used as a substitute for a hard wired

system as required in new build properties. In

this type of property the building regulations

require alarms to be interlinked. You can

obtain further information from your local re

service or building control department at your

local council ofces. These sources generally

provide advice on new builds or projects that

require planning permission.

Your smoke alarm typically meets the minimum

requirements for family living units in existing

buildings, as long as at least one unit is installed on

each oor/level of your property.

In order to achieve the earliest re warning, we

recommend that a smoke alarm is tted in all rooms

where the temperature is normally between 4°C

(40°F) and 38°C (100°F).The type of smoke alarm

used in each location should be appropriate to the

environment. Check the section on ‘Positioning’ to

ensure that the smoke alarm is to be correctly

positioned for the particular dwelling into which it

is intended to be installed.

WARNING: The alarm positions

shown overleaf are based on typical

homes. Construction and layout of individual

dwellings will vary, so this should be regarded

only as a guide. Check with your local re

station for further guidance.

LOUNGE

CELLAR

BEDROOMBEDROOM HALL

DINING ROOM

MINIMUM RECOMMENDATIONS

RECOMMENDED FOR ADDITIONAL PROTECTION

EXISTING HOMES

NOTE: Kitchens should be covered by a

self contained heat detector.

Multi-family or mixed occupant residence

(Tenancy building, student accommodation)

Your FireAngel smoke alarm can also be used in

individual ats and bedsits, providing the same

conditions are met as for a single-family residence.

However, there must already be a primary

re detection system that meets regulatory

requirements for common areas such as lobbies

and hallways.

Institutions and Hotels

This includes motels, hospitals, day care facilities,

long-term health care facilities, boarding houses

and dormitories. Your smoke alarm can be used

in individual sleeping/resident rooms, providing

the same conditions are met as for a single-

family residence. However, there must already

be a primary re detection system that meets

regulatory requirements for common areas such

as lobbies and hallways. Use of this smoke alarm

in common areas may not provide sufcient

re warning to residents or meet regulatory

requirements.

This smoke alarm is designed to operate as

standalone smoke alarm.

WARNING: This FireAngel smoke

alarm will not communicate with other

smoke alarms or re alarm systems. It is not

intended as a substitute for a complete alarm

system.

Mobile Homes and Caravans

This smoke alarm is suitable for use in mobile

homes and caravans.

Commercial and Industrial Premises

This smoke alarm is not intended for any non-

residential, commercial or industrial application,

nor for any other purpose than described above.

POSITIONING

Ionisation type smoke alarms are generally

more effective at detecting fast, aming res which

consume combustable materials rapidly and

spread re quickly.

Examples of fast aming res = Ignited paper,

aming curtains, oil re

Optical (Toast Proof) smoke alarms are

less prone to false alarms from cooking fumes,

are therefore suitable for locations near kitchens.

However optical smoke alarms are more

susceptible to nuisance alarms from steam and

should not be located too close to bathrooms

and showers.

Examples of slow smouldering res = cigarette on

furniture and bedding, overheating electrical cables.

It is recommended that your FireAngel smoke

alarm is NOT to be tted in the following

locations:

• Bathrooms, shower-rooms, and other very

damp or humid areas, where the moisture can

cause unwanted alarms.

• Kitchens. Kitchens should be protected with

self-contained Heat Alarms, as the combustion

particles from cooking in kitchens will

result in unwanted alarms and permanent

contamination of the smoke alarm’s sensor.

• In areas where excessive dust or dirt could

contaminate the sensing chamber, making it

over sensitive or impairing smoke entry.

• In areas where the ambient temperature is not

controlled and may regularly drift below 4°C

(40°F) or above 38°C (100°F) e.g. unheated

buildings, open attic spaces.

• Very dirty, dusty or greasy areas.

• In very draughty areas, such as close to ceiling

fans or fresh air vents. Draughts can blow

smoke away from the alarm.

• In insect infested areas. Insects can clog

openings to the sensing chamber, preventing

smoke entry or causing unwanted alarms.

• Within 30cm (12”) of a uorescent light tting

which emits electrical ‘noise’ that can prevent

correct alarm operation.

• In wall positions that are more than 30cm

(12”) away from the ceiling (see ‘How to install

your smoke alarm’).

• In ‘dead air’ spaces (see following diagram).

• Within 30cm (12”) of light ttings or other

ceiling based obstructions.

1 METRE

(3 FEET)

100MM

(4 INCHES)

100MM

(4 INCHES)

BEST LOCATION

(IN CENTRE OF CEILING)

DEAD

AIR SPACES

WHAT ARE THE

LIMITATIONS OF MY SMOKE

ALARM?

Your FireAngel smoke alarm is designed to alert

you by sounding an alarm when it senses smoke,

i.e. it can only sense smoke and alert you if smoke

reaches it! If a re develops in an area remote from

the location of the smoke alarm, such as another

room or another level, smoke may not reach the

smoke alarm in sufcient time or quantity to sense

and alert you to the danger.

We recommend that as a minimum you install

both ionisation and optical smoke alarms on

every oor of your property. For comprehensive

coverage a smoke alarm should also be tted in

every room.

This smoke alarm cannot be used to provide

primary re detection in common areas used

by different residents such as blocks of ats and

hotels.The FireAngel smoke alarm may not alarm

before a re causes damage, injury or death, as the

smoke may not reach the smoke alarm in time.

Examples include smoking in bed and violent gas

explosions.This smoke alarm may not respond in

a reasonable time if it is not installed in the best

position, or if furniture or other obstacles are

located between the smoke alarm and the re.

WARNING: Your smoke alarm will

not operate without sufcient power.

As the alarm power pack reaches the end of its life

a low power warning chirp will be emitted every

40 seconds. When this occurs you must replace

the unit within 7 days.

Andere Handbücher für SI-610

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere FireAngel Rauchmelder Handbücher

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

FireAngel

FireAngel PS-101 Bedienungsanleitung

FireAngel

FireAngel Thermoptek WST-630 Bedienungsanleitung

FireAngel

FireAngel THERMOPTEK Wi-Safe 2 Bedienungsanleitung

FireAngel

FireAngel ST-230 Bedienungsanleitung

FireAngel

FireAngel THERMOPTEK ST-623E Bedienungsanleitung

FireAngel

FireAngel Wi-Safe2 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622-T Bedienungsanleitung

FireAngel

FireAngel THERMISTEK HT-630 Bedienungsanleitung

FireAngel

FireAngel SI-610 Bedienungsanleitung

FireAngel

FireAngel ST-620 Thermoptek Bedienungsanleitung

FireAngel

FireAngel THERMISTEK HT-630 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

FireAngel

FireAngel SI-601 Bedienungsanleitung

FireAngel

FireAngel LSI-601 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-632 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

FireAngel

FireAngel THERMOPTEK ST-623E Bedienungsanleitung

FireAngel

FireAngel SI-601 Bedienungsanleitung

FireAngel

FireAngel ST-750 Bedienungsanleitung

FireAngel

FireAngel P-LINE HT-630 Montage- und Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

FireAngel

FireAngel EZ-212 Bedienungsanleitung

FireAngel

FireAngel ST-623E-INT Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

BRK electronic

BRK electronic First Alert P1010 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Safetec

Safetec SDS-2/6 Betriebsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung